ProtoDAC TDA1387 X8 project

[v12nut]

Hi,
I am building my first protodac and in the process of collecting parts, found these and wondered if they would be ok for this project.
https://www.aliexpress.com/item/10050065...1802Km2V4A

thanks

I would say no. I would recommend the Audiophiler MKP 6.8uF . There are other sellers. You should look for film caps that are either polypropylene (MKP) or polycarbonate (MKC). Also, you need to know the size of the cap, and with radial caps the lead spacing. Lead spacing should be 27.5mm or 37.5mm. You will have more flexibility with axial caps. Keep the voltage rating lower for a smaller size.

Thanks for the reply, but these are in fact MKP.