04-11-2024, 02:04 PM
Since this is a pre-release it's hard to know what is a genuine bug and what is still a work-in-progress.
1. In my case, booting ~pre3 on an RPi3BPlus and an RPI4B, I don't see the Headphone output device listed either in the webUI or using aplay -l.
2. On first boot of the Pi4B, my Creative Tech USB-BT adapter was correctly detected as a USB Audio device with no hardware volume control. With volume knob still set at 0, I started playing a radio station. Surprise---full volume output (to BT headphones NOT on ears!). Once I adjust the volume knob, I have normal 0-100 control volume. After rebooting, the behavior seems normal.
3. I have an official 7-in display on the RPi3BPlus and the X11 server isn't starting when I activate Local Display. Need my morning coffee before I look under the covers.
Still flashing images for two more test hosts: RPiZero2W and RPi5.
Early days yet but very promising we've gotten this far!
Regards,
Kent
1. In my case, booting ~pre3 on an RPi3BPlus and an RPI4B, I don't see the Headphone output device listed either in the webUI or using aplay -l.
2. On first boot of the Pi4B, my Creative Tech USB-BT adapter was correctly detected as a USB Audio device with no hardware volume control. With volume knob still set at 0, I started playing a radio station. Surprise---full volume output (to BT headphones NOT on ears!). Once I adjust the volume knob, I have normal 0-100 control volume. After rebooting, the behavior seems normal.
3. I have an official 7-in display on the RPi3BPlus and the X11 server isn't starting when I activate Local Display. Need my morning coffee before I look under the covers.
Still flashing images for two more test hosts: RPiZero2W and RPi5.
Early days yet but very promising we've gotten this far!
Regards,
Kent
