04-11-2024, 02:53 PM
(This post was last modified: 04-11-2024, 03:28 PM by TheOldPresbyope.
Edit Reason: ETA about audio device confusion
)
Minor bug
Now have an InnoMaker DAC Pro HAT on the Pi4B in addition to the Creative Tech USB-BT adapter.
At the outset, the Creative Tech USB-BT adapter is reported as Output device 0:Creative Bluetooth and the HDMI ports as cards 1 and 2.
Now I set the proper Named I2S device (this board uses the Allo Katana DAC driver). After rebooting I have the following Output devices listed:
0: Allo Katana DAC
1: Pi HDMI 1
2: Pi HDMI 2
3: Allo Katana DAC
This is purely cosmetic: card 0 is still the Creative Tech USB-BT adapter (as confirmed by aplay -l) and I can switch back and forth between the two output devices without rebooting. Yay.
ETA-
With the Creative Tech adapter selected and playing, I rebooted. Here's a snippet of the ensuing moodeutl -l output (W2 is the model version of the CT adapter)
This same misinformation is reflected in the Audio Info modal during playback through the Creative Tech adapter to my BT headphones.
Regards,
Kent
Now have an InnoMaker DAC Pro HAT on the Pi4B in addition to the Creative Tech USB-BT adapter.
At the outset, the Creative Tech USB-BT adapter is reported as Output device 0:Creative Bluetooth and the HDMI ports as cards 1 and 2.
Now I set the proper Named I2S device (this board uses the Allo Katana DAC driver). After rebooting I have the following Output devices listed:
0: Allo Katana DAC
1: Pi HDMI 1
2: Pi HDMI 2
3: Allo Katana DAC
This is purely cosmetic: card 0 is still the Creative Tech USB-BT adapter (as confirmed by aplay -l) and I can switch back and forth between the two output devices without rebooting. Yay.
ETA-
With the Creative Tech adapter selected and playing, I rebooted. Here's a snippet of the ensuing moodeutl -l output (W2 is the model version of the CT adapter)
Code:
20240411 111822 worker: -- ALSA debug
20240411 111822 worker: --
20240411 111822 worker: Cards: 0:W2 1:vc4hdmi0 2:vc4hdmi1 3:Katana
20240411 111822 worker: 4:empty 5:empty 6:empty 7:empty
20240411 111822 worker: Mixers: 0:none 1:none 2:none 3:(Master)
20240411 111822 worker: 4:none 5:none 6:none 7:none
20240411 111822 worker: CDSP: Test version of alsa_cdsp for Pi-5 installed
20240411 111822 worker: --
20240411 111822 worker: -- Audio configuration
20240411 111822 worker: --
20240411 111822 worker: Audio device: Allo Katana DAC
20240411 111822 worker: ALSA card: has not changed
20240411 111822 worker: MPD config: update not needed
20240411 111822 worker: ALSA output: I2SThis same misinformation is reflected in the Audio Info modal during playback through the Creative Tech adapter to my BT headphones.
Code:
Audio Device
Device Allo Katana DAC
Mixer name Master
Chip ESS Sabre ES9038Q2M
Interface I2S
Formats S16_LE
Pi model Pi-4B 1.1 2GBRegards,
Kent
