04-20-2024, 10:01 PM
(04-20-2024, 09:06 PM)popej Wrote: I have tried pre4 image. My configuration is:
RPi -> HDMI -> AVR -> TV
I can't get sound on Zero 2W and 3B. 4B and 5B are working, but 5.1 channels are swapped. Difficult to guess which is which. I have 4.1 system and can't try them all.
I can't change volume control from "software" to "fixed". I get confirmation, but moode doesn't remember the setting.
On Zero 2W I have tried to get GUI on TV. I have switched "display on" and restarted, but no GUI, terminal only.
On 4B I somehow lost access to "system" configuration. Browser displayed only blank page, when I selected "system" from menu.
Anything I could test on my devices to help debugging?
Error displayed by RPi Zero 2W and 3B
Code:MPD error
Failed to open "ALSA Default" (alsa); Failed to open ALSA device "_audioout": No such device
Audio info from Zero 2W:
Code:Input / Output
Source http://radio.stereoscenic.com/ama-h
Source format MP3 Compression
Decoded to Not playing
Output format Not playing
ALSA mode IEC958 (iec958)
Audio chain MPD -> iec958 -> Device
DSP operations
Resample rate Off
Quality Off
Selective Off
CamillaDSP Off
Volume type MPD Software (24-bit)
Volume levels Knob 100, ALSA amixer: Unable to find simple control 'none',0, CDSP 0.0 dB
Audio Device
Device Pi HDMI 1
Mixer name n/a
Chip Broadcom SoC
Interface SOC
Formats IEC958_SUBFRAME_LE
Pi model Pi-Zero 2 W 1.0 512MB
Aplay info from Zero 2W:
Code:popej@raspberrypi:~ $ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: vc4hdmi [vc4-hdmi], device 0: MAI PCM i2s-hifi-0 [MAI PCM i2s-hifi-0]
Subdevices: 1/1
Subdevice #0: subdevice #0
popej@raspberrypi:~ $ aplay -L
null
Discard all samples (playback) or generate zero samples (capture)
default
Default Audio Device
sysdefault
Default Audio Device
_audioout
_audioout__
alsaequal
plug_alsaequal
btstream
camilladsp
crossfeed
plug_bs2b
eqfa12p
plug_eqfa12p
invpolarity
trx_send
hw:CARD=vc4hdmi,DEV=0
vc4-hdmi, MAI PCM i2s-hifi-0
Direct hardware device without any conversions
plughw:CARD=vc4hdmi,DEV=0
vc4-hdmi, MAI PCM i2s-hifi-0
Hardware device with all software conversions
default:CARD=vc4hdmi
vc4-hdmi, MAI PCM i2s-hifi-0
Default Audio Device
sysdefault:CARD=vc4hdmi
vc4-hdmi, MAI PCM i2s-hifi-0
Default Audio Device
hdmi:CARD=vc4hdmi,DEV=0
vc4-hdmi, MAI PCM i2s-hifi-0
HDMI Audio Output
dmix:CARD=vc4hdmi,DEV=0
vc4-hdmi, MAI PCM i2s-hifi-0
Direct sample mixing device
popej@raspberrypi:~ $
Audio info from 4B:
Code:Input / Output
Source NAS/kftk/mka/Dido-Live_At_Brixton_Academy.mka
Source format MKA 24 bit 48 kHz, 6-Channel
Decoded to PCM 24 bit 48 kHz, 6-Channel, 448 kbps
Output format PCM 24 bit 48 kHz, 6-Channel, 6.912 Mbps
ALSA mode IEC958 (iec958)
Audio chain MPD -> iec958 -> Device
DSP operations
Resample rate Off
Quality Off
Selective Off
CamillaDSP Off
Volume type MPD Software (24-bit)
Volume levels Knob 100, ALSA amixer: Unable to find simple control 'none',0, CDSP 0.0 dB
Audio Device
Device Pi HDMI 1
Mixer name n/a
Chip Broadcom SoC
Interface SOC
Formats IEC958_SUBFRAME_LE
Pi model Pi-4B 1.2 4GB
Aplay info from 4B:
Code:popej@raspberrypi:~ $ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: vc4hdmi0 [vc4-hdmi-0], device 0: MAI PCM i2s-hifi-0 [MAI PCM i2s-hifi-0]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: vc4hdmi1 [vc4-hdmi-1], device 0: MAI PCM i2s-hifi-0 [MAI PCM i2s-hifi-0]
Subdevices: 1/1
Subdevice #0: subdevice #0
popej@raspberrypi:~ $ aplay -L
null
Discard all samples (playback) or generate zero samples (capture)
default
Default Audio Device
sysdefault
Default Audio Device
_audioout
_audioout__
alsaequal
plug_alsaequal
btstream
camilladsp
crossfeed
plug_bs2b
eqfa12p
plug_eqfa12p
invpolarity
trx_send
hw:CARD=vc4hdmi0,DEV=0
vc4-hdmi-0, MAI PCM i2s-hifi-0
Direct hardware device without any conversions
plughw:CARD=vc4hdmi0,DEV=0
vc4-hdmi-0, MAI PCM i2s-hifi-0
Hardware device with all software conversions
default:CARD=vc4hdmi0
vc4-hdmi-0, MAI PCM i2s-hifi-0
Default Audio Device
sysdefault:CARD=vc4hdmi0
vc4-hdmi-0, MAI PCM i2s-hifi-0
Default Audio Device
hdmi:CARD=vc4hdmi0,DEV=0
vc4-hdmi-0, MAI PCM i2s-hifi-0
HDMI Audio Output
dmix:CARD=vc4hdmi0,DEV=0
vc4-hdmi-0, MAI PCM i2s-hifi-0
Direct sample mixing device
hw:CARD=vc4hdmi1,DEV=0
vc4-hdmi-1, MAI PCM i2s-hifi-0
Direct hardware device without any conversions
plughw:CARD=vc4hdmi1,DEV=0
vc4-hdmi-1, MAI PCM i2s-hifi-0
Hardware device with all software conversions
default:CARD=vc4hdmi1
vc4-hdmi-1, MAI PCM i2s-hifi-0
Default Audio Device
sysdefault:CARD=vc4hdmi1
vc4-hdmi-1, MAI PCM i2s-hifi-0
Default Audio Device
hdmi:CARD=vc4hdmi1,DEV=0
vc4-hdmi-1, MAI PCM i2s-hifi-0
HDMI Audio Output
dmix:CARD=vc4hdmi1,DEV=0
vc4-hdmi-1, MAI PCM i2s-hifi-0
Direct sample mixing device
popej@raspberrypi:~ $
1. I can't get sound on Zero 2W and 3B (HDMI)
Bug. Will be fixed in upcoming ~pre5
2. 4B and 5B are working, but 5.1 channels are swapped. Difficult to guess which is which. I have 4.1 system and can't try them all.
Could be a kernel HDMI audio issue (HDMI)
3. I can't change volume control from "software" to "fixed". I get confirmation, but moode doesn't remember the setting.
Bug. Will be fixed in upcoming ~pre5
4. On Zero 2W I have tried to get GUI on TV. I have switched "display on" and restarted, but no GUI, terminal only.
Looks like some sort of issue with XServer on < Pi4 when KMS driver (the default for Bookworm)
Code:
pi@moode9:~ $ cat /home/pi/.local/share/xorg/Xorg.0.log
[ 1517.711]
X.Org X Server 1.21.1.7
X Protocol Version 11, Revision 0
[ 1517.712] Current Operating System: Linux moode9 6.6.20+rpt-rpi-v8 #1 SMP PREEMPT Debian 1:6.6.20-1+rpt1 (2024-03-07) aarch64
[ 1517.712] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_hdmi=0 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=a5bb28c4-02 rootfstype=ext4 fsck.repair=yes rootwait cfg80211.ieee80211_regdom=US
[ 1517.712] xorg-server 2:21.1.7-3+rpt2+deb12u5 (https://www.debian.org/support)
[ 1517.712] Current version of pixman: 0.42.2
[ 1517.712] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 1517.712] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 1517.712] (==) Log file: "/home/pi/.local/share/xorg/Xorg.0.log", Time: Sat Apr 20 17:47:14 2024
[ 1517.713] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 1517.713] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 1517.713] (==) No Layout section. Using the first Screen section.
[ 1517.713] (==) No screen section available. Using defaults.
[ 1517.713] (**) |-->Screen "Default Screen Section" (0)
[ 1517.713] (**) | |-->Monitor "<default monitor>"
[ 1517.714] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 1517.714] (**) | |-->Device "kms"
[ 1517.714] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 1517.714] (**) Option "Debug" "dmabuf_capable"
[ 1517.714] (==) Automatically adding devices
[ 1517.714] (==) Automatically enabling devices
[ 1517.714] (==) Automatically adding GPU devices
[ 1517.714] (==) Automatically binding GPU devices
[ 1517.714] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 1517.714] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 1517.714] Entry deleted from font path.
[ 1517.714] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins
[ 1517.714] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 1517.714] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 1517.714] (II) Loader magic: 0x5591ad0ef0
[ 1517.714] (II) Module ABI versions:
[ 1517.714] X.Org ANSI C Emulation: 0.4
[ 1517.714] X.Org Video Driver: 25.2
[ 1517.714] X.Org XInput driver : 24.4
[ 1517.714] X.Org Server Extension : 10.0
[ 1517.718] (EE) systemd-logind: failed to get session: PID 7109 does not belong to any known session
[ 1517.720] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 1517.720] (II) Platform probe for /sys/devices/platform/soc/soc:gpu/drm/card0
[ 1517.728] (**) OutputClass "vc4" setting /dev/dri/card0 as PrimaryGPU
[ 1517.728] (II) LoadModule: "glx"
[ 1517.729] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 1517.733] (II) Module glx: vendor="X.Org Foundation"
[ 1517.733] compiled for 1.21.1.7, module version = 1.0.0
[ 1517.733] ABI class: X.Org Server Extension, version 10.0
[ 1517.733] (II) LoadModule: "modesetting"
[ 1517.733] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 1517.735] (II) Module modesetting: vendor="X.Org Foundation"
[ 1517.735] compiled for 1.21.1.7, module version = 1.21.1
[ 1517.735] Module class: X.Org Video Driver
[ 1517.735] ABI class: X.Org Video Driver, version 25.2
[ 1517.735] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 1517.735] (EE)
Fatal server error:
[ 1517.735] (EE) parse_vt_settings: Cannot open /dev/tty0 (Permission denied)
[ 1517.735] (EE)
[ 1517.735] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 1517.735] (EE) Please also check the log file at "/home/pi/.local/share/xorg/Xorg.0.log" for additional information.
[ 1517.735] (EE)
[ 1517.735] (WW) xf86CloseConsole: KDSETMODE failed: Bad file descriptor
[ 1517.735] (WW) xf86CloseConsole: VT_GETMODE failed: Bad file descriptor
[ 1517.735] (EE) Server terminated with error (1). Closing log file.
pi@moode9:~ $5. On 4B I somehow lost access to "system" configuration. Browser displayed only blank page, when I selected "system" from menu.
Not able to repro but could still be a bug
