Thank you for your donation!


Cloudsmith graciously provides open-source package management and distribution for our project.


Solved: Waveshare 5" DSI - Touch does not work -
#18
(05-22-2024, 12:48 PM)ECELO Wrote:
(05-22-2024, 10:27 AM)Tim Curtis Wrote: Configure the WiFi static address, plug in an ethernet cable, reboot and then post the startup log.

The log can be viewed via the SSH command moodeutl -l or downloaded via the Logs section in System Config, or via Menu, System info from any of the Config screens. The startup log will be at the end of System info output.

I changed the subnet mask from 255.255.255.255 to 255.255.255.0 as suggested by TheOldPresbyope and everything was back to normal.

Unfortunately it didn't solve the problem because despite having entered the new subnet mask and the correct DNS, upon restarting the system, although STATIC is displayed in the GUI, in moodeutl -l it confirms that it is still a DHCP type connection

20240522 181628 worker: Wireless: method  dhcp
20240522 181628 worker: Wireless: address 192.168.1.203
20240522 181628 worker: Wireless: netmask 255.255.255.0
20240522 181628 worker: Wireless: gateway 192.168.1.1
20240522 181628 worker: Wireless: pri DNS none found
20240522 181628 worker: Wireless: domain  none found
Reply


Messages In This Thread
RE: Waveshare 5" DSI - Touch does not work - - by ECELO - 05-22-2024, 04:24 PM

Forum Jump: