06-01-2024, 04:44 PM
The attached (fingers crossed) jpg shows a moOde player I built.
Details:
Raspberry Pi 3B.
Waveshare 4.3inch IPS screen with DSI interface.
Extruded aluminium Project Box, 80×160×170mm.
Using USB Audio output to keep things simple. Connected to a Cambridge Audio CXA61 amp with USB input.
USB Stick has my CD files ripped to FLAC using dbpoweramp.
The push switch is power on/off. The extra circuitry is added to allow the power switch to shut down the Pi before turning off the 5V supply. This makes use of the gpio-poweroff and gpio-shutdown functions.
I was pleased to find that the Waveshare LCD works with moOde with no extra configuration required. Even down to the Backlight control from the moOde GUI. I disabled the touchscreen as I just want a "now playing" display.
A big thanks to the moOde team and also to the forum users - there is a lot of useful info on these boards!
Details:
Raspberry Pi 3B.
Waveshare 4.3inch IPS screen with DSI interface.
Extruded aluminium Project Box, 80×160×170mm.
Using USB Audio output to keep things simple. Connected to a Cambridge Audio CXA61 amp with USB input.
USB Stick has my CD files ripped to FLAC using dbpoweramp.
The push switch is power on/off. The extra circuitry is added to allow the power switch to shut down the Pi before turning off the 5V supply. This makes use of the gpio-poweroff and gpio-shutdown functions.
I was pleased to find that the Waveshare LCD works with moOde with no extra configuration required. Even down to the Backlight control from the moOde GUI. I disabled the touchscreen as I just want a "now playing" display.
A big thanks to the moOde team and also to the forum users - there is a lot of useful info on these boards!
