06-10-2024, 11:42 AM
@xibalba
It is certainly possible the default settings in config.txt don't suit every possible HDMI display but since I don't have the same device you have I have no way of testing various solutions.
Have you tried the safe setting described in the Raspberry Pi OS documentation? (https://www.raspberrypi.com/documentatio...#hdmi_safe) Since the hdmi_safe=1 setting is described as a legacy parameter, it may or may not still work in Bookworm, but you could try the equivalent set of values listed in that description.
Other than that, I can only suggest you post your question instead on the Raspberry Pi Forum, where there's more likely to be other WIMAXIT owners, and/or to WIMAXIT themselves.
Good luck.
Regards,
Kent
It is certainly possible the default settings in config.txt don't suit every possible HDMI display but since I don't have the same device you have I have no way of testing various solutions.
Have you tried the safe setting described in the Raspberry Pi OS documentation? (https://www.raspberrypi.com/documentatio...#hdmi_safe) Since the hdmi_safe=1 setting is described as a legacy parameter, it may or may not still work in Bookworm, but you could try the equivalent set of values listed in that description.
Other than that, I can only suggest you post your question instead on the Raspberry Pi Forum, where there's more likely to be other WIMAXIT owners, and/or to WIMAXIT themselves.
Good luck.
Regards,
Kent
