(06-10-2024, 11:42 AM)TheOldPresbyope Wrote: @xibalba
It is certainly possible the default settings in config.txt don't suit every possible HDMI display but since I don't have the same device you have I have no way of testing various solutions.
Have you tried the safe setting described in the Raspberry Pi OS documentation? (https://www.raspberrypi.com/documentatio...#hdmi_safe) Since the hdmi_safe=1 setting is described as a legacy parameter, it may or may not still work in Bookworm, but you could try the equivalent set of values listed in that description.
Other than that, I can only suggest you post your question instead on the Raspberry Pi Forum, where there's more likely to be other WIMAXIT owners, and/or to WIMAXIT themselves.
Good luck.
Regards,
Kent
i have done that and they responded as follows:
The Raspberry Pi OS Bookworm Lite system itself may not come with a desktop control system. In other words, you connect the HDMI signal to any other regular model HDMI monitor, it will be stuck in the software login interface too.
there is maybe a next steps to resolve this issue?
