Hey there,
I landed here after dedicing to "modify" an DAB+ radio to turn it into an Internet Radio.
![[Image: IMG-20240702-140326.jpg]](https://i.ibb.co/8Xr9wfq/IMG-20240702-140326.jpg)
This is an Raspi 4/8GB and an IQaudio DigiAMP+ which I had both laying around (I have tons of components and parts collected including several Arduinos, ESP32, ...).
I basically removed most components, cut the PCB in half (to make space to replace the propitary LCD) and soldered cables onto the 5 buttons and 2 potentiometers.
I basically started this to learn myself soldering and proceed my spare time hobby.
The Buttons and Rotary Encoders all work already. I'm now looking to port over the Rotary Encoders II Plugin logic from Volumio over to Moode now so that I can use my second Rotary Encoder to change channels.
After that I need to add an LCD - most likely going with this: https://www.ebay.de/itm/176358814589
Edit: Ordered this display because of the dimensions.
... specifically I2C because I'm running short on GPIO PINs with 16 Cables connected onto the hat (which also uses some of those for itself).
I almost gave up with moode because I'm a 'dd' guy until I finally used the RaspberryPi Image flasher to preset the SSH access and Wifi connection.
After trying out max2play, Volumio and piCorePlayer I'm going to stay here.
Ah yes ... I'm a dev
Cheers!
Simon
I landed here after dedicing to "modify" an DAB+ radio to turn it into an Internet Radio.
This is an Raspi 4/8GB and an IQaudio DigiAMP+ which I had both laying around (I have tons of components and parts collected including several Arduinos, ESP32, ...).
I basically removed most components, cut the PCB in half (to make space to replace the propitary LCD) and soldered cables onto the 5 buttons and 2 potentiometers.
I basically started this to learn myself soldering and proceed my spare time hobby.
The Buttons and Rotary Encoders all work already. I'm now looking to port over the Rotary Encoders II Plugin logic from Volumio over to Moode now so that I can use my second Rotary Encoder to change channels.
After that I need to add an LCD - most likely going with this: https://www.ebay.de/itm/176358814589
Edit: Ordered this display because of the dimensions.
... specifically I2C because I'm running short on GPIO PINs with 16 Cables connected onto the hat (which also uses some of those for itself).
I almost gave up with moode because I'm a 'dd' guy until I finally used the RaspberryPi Image flasher to preset the SSH access and Wifi connection.
After trying out max2play, Volumio and piCorePlayer I'm going to stay here.
Ah yes ... I'm a dev
Cheers!
Simon
