08-09-2024, 07:56 AM
In this post, he says three TDA1387 will drive the IV stage to maximum output.
In this post, he suggests using a "series and shunt combination of resistors", provided the DACs output compliance isn't exceeded. Or limit the digital volume.
Reducing the Vdd from 5V to 3V will decrease the output current of each TDA1387 from 1mA to 0.6mA.
In this post, he suggests using a "series and shunt combination of resistors", provided the DACs output compliance isn't exceeded. Or limit the digital volume.
Reducing the Vdd from 5V to 3V will decrease the output current of each TDA1387 from 1mA to 0.6mA.
Hardware: RPi Zero W | Allo Kali | ProtoDAC TDA1387 X8 | PGA2311 | Icepower 500ASP | Harbeth SHL5
Software: Moode 8.3.3
Source: Win 10 NAS
Software: Moode 8.3.3
Source: Win 10 NAS