Pixel aspect ratio for 7'' display

[Tim Curtis]

Try without any of the custom config.txt custom settings from the manufacturer.

The stock moode 906 config.txt is below.

Code:

#########################################
# This file is managed by moOde
#########################################

# Device filters
[cm4]
otg_mode=1
[pi4]
hdmi_force_hotplug:0=1
hdmi_force_hotplug:1=1
hdmi_enable_4kp60=0
[all]
dtoverlay=vc4-kms-v3d
max_framebuffers=2
display_auto_detect=1
disable_fw_kms_setup=1
arm_64bit=1

# General settings
arm_boost=0
disable_splash=1
disable_overscan=1
hdmi_drive=2
hdmi_blanking=1
hdmi_force_edid_audio=1
hdmi_force_hotplug=1
hdmi_group=0
dtparam=i2c_arm=on
dtparam=i2s=on
dtparam=audio=on

# Do not alter this section
# Integrated adapters
#dtoverlay=disable-bt
#dtoverlay=disable-wifi
# Audio overlays
#dtoverlay=none
#dtoverlay=force_eeprom_read=0
# PCI Express
#dtparam=pciex1
#dtparam=pciex1_gen=3
# Pi Touch
#dtoverlay=rpi-backlight
#dtoverlay=vc4-kms-dsi-7inch,invx,invy