Sorry, I am not familiar with CamillaDSP.
A dry solder joint might cause problems. Inspect the solder joints with a magnifier. The most common problem joints are the ones connected to the grounds, since they need a lot of extra heat to get the solder to adhere properly to the pad. Use an alligator clip as heatsink to protect the TX2575 leads.
A dry solder joint might cause problems. Inspect the solder joints with a magnifier. The most common problem joints are the ones connected to the grounds, since they need a lot of extra heat to get the solder to adhere properly to the pad. Use an alligator clip as heatsink to protect the TX2575 leads.
Hardware: RPi Zero W | Allo Kali | ProtoDAC TDA1387 X8 | PGA2311 | Icepower 500ASP | Harbeth SHL5
Software: Moode 8.3.3
Source: Win 10 NAS
Software: Moode 8.3.3
Source: Win 10 NAS