09-01-2024, 08:49 PM
(This post was last modified: 09-04-2024, 12:01 PM by Tim Curtis.
Edit Reason: mark solved
)
Wonderful software, has made me somewhat obsessed...
On a fresh installation of 9.0.8 I upload one single wav file to CamillaDSP (attached, 32 PCM float 44100 Hz, 513 kB, 1,5s) and create a conv filter with it in a new CDSP config with nothing else in it. CamillaDSP can plot the FR of the IR just fine.
Soon after Moode semi-crashes by not responding to the menu buttons under Configure (Library, Audio, Network, System MPD, CamillaDSP and so on). Only the Clock Radio btutton works. The camilladsp config choice button next to the "m" in the top right corner typically disappears (have tried this whole process maybe four times). I can still reach camilladsp through port 15000 and it is running, even though the "Audio Information/Playback" in Moode says it is not.
The only way to get it all working again seems to be a fresh (re)install.
Everything else is working great, is my wav file somehow incompatible/broken? It opens fine in REW. I have made sure to use simple short names of files and configs and no special characters.
I use a Raspberry Pi 3B, original PSU and a Sandisk 32 GB SD card.
Thank you
On a fresh installation of 9.0.8 I upload one single wav file to CamillaDSP (attached, 32 PCM float 44100 Hz, 513 kB, 1,5s) and create a conv filter with it in a new CDSP config with nothing else in it. CamillaDSP can plot the FR of the IR just fine.
Soon after Moode semi-crashes by not responding to the menu buttons under Configure (Library, Audio, Network, System MPD, CamillaDSP and so on). Only the Clock Radio btutton works. The camilladsp config choice button next to the "m" in the top right corner typically disappears (have tried this whole process maybe four times). I can still reach camilladsp through port 15000 and it is running, even though the "Audio Information/Playback" in Moode says it is not.
The only way to get it all working again seems to be a fresh (re)install.
Everything else is working great, is my wav file somehow incompatible/broken? It opens fine in REW. I have made sure to use simple short names of files and configs and no special characters.
I use a Raspberry Pi 3B, original PSU and a Sandisk 32 GB SD card.
Thank you
