ProtoDAC TDA1387 X8 project

[jwchen119]

I tested continuity between 5v and GND and it was positive (beep from multimeter)

Edit:
I managed to remove the x8 module. No continuity on the pcb now between vcc and gnd.

Checking the module, I have continuity between vcc and ground.

Checking the capacitors on the underside, I have continuity on half of them

Looks like we have brought the same module, this one keeps my PI from booting.
5V and GND is indeed shorted(PIN5&28). And the PIN2 and PIN 4 is not conected.
I've ask the seller about the schemetic, but they said they don't have it.