[How to do instruction] LCD/OLED display using pydPiper

[rh2018]

Hi Remy,

Having a 16x2 LCD display up and running I thought I would try an OLED panel.

I found a 0.96inch 128x64 12c SSD1306 panel but it has a reset pin in addition to the usual Vcc, Gnd, SCL and SDA pins.

Datasheet link - http://www.tinyosshop.com/datasheet/Tiny...Manual.pdf

I could not see a reference to a reset pin in pydPiper. Do you think this display will work with moOde or should I look for a 4-pin only display?

Regards,
Richard.