10-10-2024, 07:16 PM
OK, I have set up a D-Link DAP-2695 AP in same room as the multiroom. I am able to get the Raspberry PI 4 and 5 to connect to the 5ghz band but the PI 3 will only connect to the 2.4ghz. The 5Ghz channel is clear, aka the only AP using this channel I can scan for is my AP. At this point I don't see how I could possibly get the WiFi any cleaner than this.
That being said. While the response times did improve, this did not help the issue at all. BTW, Receiver 1 is the PI 3 and Receiver 2 is the Pi 4.
Sender to receiver 1
50 packets transmitted, 50 received, 0% packet loss, time 298ms
rtt min/avg/max/mdev = 1.873/5.312/18.540/4.127 ms, pipe 2, ipg/ewma 6.072/5.037 ms
Sender to receiver 2
50 packets transmitted, 50 received, 0% packet loss, time 112ms
rtt min/avg/max/mdev = 1.294/1.777/3.491/0.478 ms, ipg/ewma 2.290/1.741 ms
That being said. While the response times did improve, this did not help the issue at all. BTW, Receiver 1 is the PI 3 and Receiver 2 is the Pi 4.
Sender to receiver 1
50 packets transmitted, 50 received, 0% packet loss, time 298ms
rtt min/avg/max/mdev = 1.873/5.312/18.540/4.127 ms, pipe 2, ipg/ewma 6.072/5.037 ms
Sender to receiver 2
50 packets transmitted, 50 received, 0% packet loss, time 112ms
rtt min/avg/max/mdev = 1.294/1.777/3.491/0.478 ms, ipg/ewma 2.290/1.741 ms
