(11-23-2024, 07:29 PM)Nutul Wrote:(11-23-2024, 05:11 PM)Calaat Wrote: (...) I use an IQaudio Pro, which is hardware capable to decode DSD.To play DSD the following has to be matched:
so, when I see the playback info it says it is DSD and it is decode to PCM 24bit - 352.8Mhz.
1. your device MUST be able to decode DSD natively, and report it to the system
(you can check this in the bootom of the popup you sent a picture of, under AUDIO DEVICE, Formats, you should see something like DSD_U32_BE)
2. in the MPD settings, under DSD support, "Native DSD" has to be selected in the drop-down; otherwise MPD will transcode it to linear PCM
ETA
If everything is correct, the audio information should read DSD in all the three fields:
Source format
Decoded to
Output format
Ok, so, my device is capable (in theory, i mean maybe nit is not but, in the specs of the raspberry foundation: Audiophile TI Burr Brown 32-bit/384kHz DAC (TI PCM5242)) and i have DSD native selected.
Where, or how i can see if my device is reporting it?
Thx for the answer!
This is what i see: https://imgur.com/ocxhDSE
