Local Display 8.8 in 1920x480

[mtavares]

Is this procedure valid for the HDMI output or only DSI?

yes, change the xrandr command to use the one Tim asked you in an earlier post

Code:

xrandr --output HDMI-1 --rotate left

comment out the SCREENSIZE bit, and hard code with your dimensions.

It is working now.  Problem solved.

It was necessary in addition to the commands you proposed to perform Tim's recommendation to change the DSI display to Pi Touch 2, DSI Port to DS-1 and Rotate to 90 deg.

The result is shown in the picture in the attachment.

Thank you and Tim by your support. 

Best Regards, QJA