01-05-2025, 05:18 AM
After a lot of trials I finally figured out the IR remote for the PicoPlayer. This is a nice addition to the LCD screen for the PicoPlayer
You will need to get a Squezeebox IR remote(another remote could be JustBoom but is hard to find) . Then you connect an IR receiver TSOP4838 at pin 1, 6 and 22 of RPI GPIO. On the PicoPlayer under Tweaks you need to have the Jivelite installed and it might work just like this. If not then, under IR remote go for the IR remote for Jivelite and install the IR tools. Then it should work. Other remotes could work but you need to tweak the remote mapping file to the remote you have.
You will need to get a Squezeebox IR remote(another remote could be JustBoom but is hard to find) . Then you connect an IR receiver TSOP4838 at pin 1, 6 and 22 of RPI GPIO. On the PicoPlayer under Tweaks you need to have the Jivelite installed and it might work just like this. If not then, under IR remote go for the IR remote for Jivelite and install the IR tools. Then it should work. Other remotes could work but you need to tweak the remote mapping file to the remote you have.
