Thinking of making DAC

[thomaschan]

I've been making my own DAC's since the mid 90's.  For the last decade or so, I've been feeding my various audio systems with an Airport Express from iTunes.  I use TOSLink on my DACs.  A few years ago, I made a semi-modern DAC to replace my tube based DAC from the turn of the century (I've been wanting to say that for a while now).  Here's my latest DAC:

http://getinthewoodchipper.com/?p=302

It uses a CD8416 decoder chip to get from TOSLink or SPDIF to I2S.  I then have an Asynchronous Sample Rate Converter (CS8421) to deal with jitter issues.  Finally I'm using a CS4398 DAC chip which feed a pair of nickel core Lundahl LL1690 output transformers which act as the output stage.  IT's a very good sounding and music DAC.  

I'm planning on refining it to allow a rPi to be plugged in and powered to it as a daughter card.  Any interest in this project. 


Sheldon

PS  Also First Post!!!!

I already have a CS8412 receiver chip PCB with I2S output. Can I just connect it directly to CS9438 via I2S without the 8421 Converter?