03-09-2025, 04:00 PM
Hello,
I finally purchased Waveshare 8.8inch display as described in the below link:
https://www.waveshare.com/product/displa...si-lcd.htm
I applied the settings for DSI display in moOde peripherals sub-menu.
Pi Touch-1
DSI-1
Display ON
Wake on Play
Also added the following lines in /boot/firmware/config.txt
dtoverlay=vc4-kms-v3d
#DSI1 Use
dtoverlay=vc4-kms-dsi-waveshare-panel,8_8_inch
The display left blank but seems to be power supplied.
The green POWER LED of the display is blinking (?) but power supply is 5V 5A.
I even don't know how it will be with the touchscreen which was first my main concerns... but actually even the display does not work
Your help is welcome!
Regards,
Jacques.
I finally purchased Waveshare 8.8inch display as described in the below link:
https://www.waveshare.com/product/displa...si-lcd.htm
I applied the settings for DSI display in moOde peripherals sub-menu.
Pi Touch-1
DSI-1
Display ON
Wake on Play
Also added the following lines in /boot/firmware/config.txt
dtoverlay=vc4-kms-v3d
#DSI1 Use
dtoverlay=vc4-kms-dsi-waveshare-panel,8_8_inch
The display left blank but seems to be power supplied.
The green POWER LED of the display is blinking (?) but power supply is 5V 5A.
I even don't know how it will be with the touchscreen which was first my main concerns... but actually even the display does not work
Your help is welcome!
Regards,
Jacques.
moOde 9.2.6 + RPi 4 2M + Ian Canada transportpi DIGI + Topping Velvet E70 + Waveshare 8.8inch DSI display
