03-12-2025, 07:35 PM
Hello,
To close this topic and hope it can be useful for anyone, I succeeded to make this display working.
The following lines must be well added into /boot/firmware/config.txt (see below).
I also attached the setup in the "Peripherals" section for configuration purpose.
The display is working fine and is really adapted in terms of use in ultra-wide format.
Thanks to Tim for the help!
Regards,
Jacques.
dtoverlay=vc4-kms-v3d
#DSI1 Use
dtoverlay=vc4-kms-dsi-waveshare-panel,8_8_inch
https://www.waveshare.com/8.8inch-DSI-LCD.htm
https://s.click.aliexpress.com/e/_EGB0Cmc
To close this topic and hope it can be useful for anyone, I succeeded to make this display working.
The following lines must be well added into /boot/firmware/config.txt (see below).
I also attached the setup in the "Peripherals" section for configuration purpose.
The display is working fine and is really adapted in terms of use in ultra-wide format.
Thanks to Tim for the help!
Regards,
Jacques.
dtoverlay=vc4-kms-v3d
#DSI1 Use
dtoverlay=vc4-kms-dsi-waveshare-panel,8_8_inch
https://www.waveshare.com/8.8inch-DSI-LCD.htm
https://s.click.aliexpress.com/e/_EGB0Cmc
moOde 9.2.6 + RPi 4 2M + Ian Canada transportpi DIGI + Topping Velvet E70 + Waveshare 8.8inch DSI display
