04-17-2018, 10:10 PM
@pinkdot Could you post the results of:
In the above post, I don't think it's really clear what the content of the file should be. It should be just:
Obviously, you would need to configure your device, which is the tricky part.
After re-saving the file, try running the start option:
Wait a few seconds and then run:
report back with the issues. If all went well, you can enable the service.
Still, since that is not the approach I use, I may not be of all that help after all. I am still vouching for the method I use
Best regards,
Rafa.
Code:
$ cat /etc/systemd/system/spotify-connect.service
In the above post, I don't think it's really clear what the content of the file should be. It should be just:
Code:
[Unit]
Description=Spotify Connect
Requires=network-online.target
After=network-online.target
[Service]
User=root
ExecStart=/home/pi/librespot/target/release/librespot --name MoodeSpot --initial-volume 75 --cache /tmp --bitrate 320 --backend alsa --device hw:1
Restart=always
RestartSec=10
StartLimitInterval=30
StartLimitBurst=20
[Install]
WantedBy=multi-user.target
Obviously, you would need to configure your device, which is the tricky part.
After re-saving the file, try running the start option:
Code:
$ sudo systemctl start spotify-connect.service
Wait a few seconds and then run:
Code:
$ sudo systemctl status spotify-connect.service
report back with the issues. If all went well, you can enable the service.
Still, since that is not the approach I use, I may not be of all that help after all. I am still vouching for the method I use

Best regards,
Rafa.