Screen resolution issue

[marlab]

Hi marlab, if the Pi 4 Works please let me know..

Yes it actually works nicely

I had a spare RPi4 2MB RAM, so I thought I would just connect quickly for a test, but... it stays here. No more audio drops (I use external USB DAC), no more sluggish screen I had with RPi3... Do not get me wrong - RPi3 worked perfectly in the headless mode, until I've connected the external screen, which seems to require more horsepower.

I've managed to lower the resolution, as some controls are simply too small on my 7" screen. Just for the reference, that's what I currently have in /boot/firmware/config.txt. It can be possibly improved... but I still enjoy the fact it started working nicely, and I'll perfect it later:

Code:

# Device filters
[cm4]
otg_mode=1
[pi4]
hdmi_force_hotplug:0=0
hdmi_force_hotplug:1=0
hdmi_enable_4kp60=0
[all]
#dtoverlay=vc4-kms-v3d
max_framebuffers=1
#display_auto_detect=1
disable_fw_kms_setup=1
arm_64bit=1

# General settings
arm_boost=0
disable_splash=1
disable_overscan=1
hdmi_drive=2
hdmi_blanking=1
hdmi_force_edid_audio=1
hdmi_force_hotplug=1
#hdmi_group=0

hdmi_cvt=768 460 60 3 0 0 0
hdmi_group=2
hdmi_mode=87