[How to do instruction] LCD/OLED display using pydPiper

[remy1961]

http://moodeaudio.org/forum/showthread.p...94#pid6294
Yes, seems the docker container is lagging during shutdown and reboot....is that a bug or normal behaviour...?   anyone ?

http://moodeaudio.org/forum/showthread.p...09#pid6309

Thanks for that Remy.... at first glance I found the configuration to be almost unfathomable... your explanation is most useful...

I have changed scrolling to only scroll occasionally but that required several trials as the scrolling parameters are very vague in their description....
"gap" "hesitate" "openloop"   what was the dev on when those were dreamed up.. :-)

I am used to the convention for Pi Lcd's of line and output with an overview of scroll speed, frequency, and repeat.

I see the github page has a promised explanation of parameters but still not implemented so your post is appreciated....

If you have the time and inclination more depth on the other  settings would be helpful... ;-)

HI DRONE7. That's the problem with most free open sources, there is no proper manual. I managed to understand how some of these settings work through trials, and also by asking directly to the developer. He always answer questions, usually after 2-3 days. I will soon have to edit the first post of this thread to put together all the information scattered in different posts in the thread.
Remy