More Bluetooth problems

[Hillsidebeer]

Thanks for the suggestions. It didn't seem to work quite that way for me. I have BT turned on the the System settings, but I can't use the BT configuration commands until I've selected BT as the output on the SEL page. I can then go to the BLU page and Initialise Controller, Scan, Pair and Connect, reporting apparent success each time. However, the Anker speaker never shows a connection and if I list connections in BLU, none exists.

The speakers links up to my phone with no problem, so the issue seems to be with my Moode settings.

Andy

Hi Andy,

I had a quite similar problem with my Teufel BT speaker. This is how I achieved a lasting connection: With BT speaker on, scan and afterwards pair. Then BT speaker off, wait 1-2 seconds, turn it on again and then hit connect. After this, my speaker now connects readily every time when powered up. Please try this and give some feedback. I´m currrently searching for arguments supporting my assumption that the Raspi as BT source needs a lot of snake oil  

Hi Kihaha,

I tried your method, but it didn't work with my Soundcore 2. After pairing and turning the speaker off and on, I hit Connect, got a message that the Soundcore was connected, but its blue light continued to flash. Asking Moode to List Connected confirmed no connections.

Looks like I'll have to connect by wire for now, unless there are more things to try.

Cheers
Andy