[SOLVED] Local UI display with 3.5 inch TFT

[Langohr]

Hi,

this is /etc/X11/Xorg.conf

btw: xinit mentioned that config is in file /etc/X11/xorg.conf
Because it might be case sensitive I copied the file to Xorg.conf:

# This is a minimal sample config file, which can be copied to
# /etc/X11/xorg.conf in order to make the Xorg server pick up
# and load xf86-video-fbturbo driver installed in the system.
#
# When troubleshooting, check /var/log/Xorg.0.log for the debugging
# output and error messages.
#
# Run "man fbturbo" to get additional information about the extra
# configuration options for tuning the driver.

Section "Device"
Identifier "Allwinner A10/A13 FBDEV"
Driver "fbturbo"
Option "fbdev" "/dev/fb1"

Option "SwapbuffersWait" "true"
EndSection



I have a suspicion: The output of dmesg | grep -iC 3 "graphics" shows:

[ 5.015471] graphics fb1: fb_ili9486 frame buffer, 480x320, 300 KiB video memory, 32 KiB buffer memory, fps=33, spi0.0 at 16 MHz

But I have no ili-display nor 480 resolution. How can I set this to the waveshare35a and 320 pixels ?
Somehow the settings are wrong.
I will make a backup from current image and start from skratch tomorrow. I have the feeling that something went terribly wrong during all this setup process and I'm lost.

Thanks again for your help!
Keep on trying.....