03-26-2019, 06:32 PM
Ah... HiFiBerry....my digi-pro had something similar....intermittently being not recognised by MoOde and so no output.
As there are no power leds on these boards it took a while to track down.... the soldering of the header was imperfect and the 5v connection was lost.
I measured with a multi-meter to confirm then re-soldered the 5v pin and all has been well since.
The hat dacs I feel are prone to this as the force required to fit or remove them can exacerbate an already poor connection.
As there are no power leds on these boards it took a while to track down.... the soldering of the header was imperfect and the 5v connection was lost.
I measured with a multi-meter to confirm then re-soldered the 5v pin and all has been well since.
The hat dacs I feel are prone to this as the force required to fit or remove them can exacerbate an already poor connection.
----------
bob
bob
