[How to do instruction] Use hardware momentary switches to control moOde

[DRONE7]

Hi,

Here is screenie of new GPIO Config feature :-) The underlying code can be easily extended to support other actions. This interfaces with a modified version of @Cyanoazimin's nice script from post #9.



I'll need some volunteers to test this out because I'm w/o any hardware that has GPIO controlled buttons.

-Tim

Tim, from the 1st post...

On the hardware side, you set your hardware button to connect the ground pin of your RPi with a GPIO pin of your choice.

So you should be able to strip the ends of a couple of dupont cables, connect the plug ends to ground and selected pin then briefly touch the bare ends together. 
Happy to test it here...