moOde 5.0 RC1 In-Place Update

[franz159]

I just updated to version 5.0-RC1-83 and I would like to mention an issue with DSD reproduction with MPD 0.21.6:
when reproducing DSD tracks (I tried both tracks in DSD 64 and 128) there is an annoying background noise/hiss.

Two additional notes:

• the noise disappears and the reproduction is correct when using MPD 0.20.20
  
• the issue was there also in previous RC0 and RC1 versions
  

Hopefully, the MPD version choice combo under Audio Config will stay in the final Version 5!

Adding below some details on one of the test files used (I can provide them if needed) and the Khadas USB DAC used.
Thanks
franz

Audio Information

INPUT PROCESSING
Source: 
NAS/Raspi3N/003-musica-jazz/Witmer Trio/En Azul (DSD128)/02 Rhapsody In Blue - Witmer Trio.dsf
Encoded at: DSD128, 1 bit, 5.644 msps Stereo
Decoded to: DSD bitstream, 11.290 mbps
DSP OPERATIONS
Resampling: off
Crossfeed: off
Equalizer: Graphic EQ: (off), Parametric EQ: (off}
Crossfade: 0 seconds
Other: Volume normalize (no}, Replaygain (off)
Chip options: none
Volume ctl: Software (MPD 32-bit float with dither)
OUTPUT STREAM
Destination: Local
Rate:  DSD bitstream bit, 176.4 kHz, Stereo, 11.290 mbps
AUDIO DEVICE 
Device: USB audio device
Chip: 
Interface: USB
_____________________________________________

Code:

pi@moode5zotl:~ $ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: ALSA [bcm2835 ALSA], device 0: bcm2835 ALSA [bcm2835 ALSA]
 Subdevices: 7/7
 Subdevice #0: subdevice #0
 Subdevice #1: subdevice #1
 Subdevice #2: subdevice #2
 Subdevice #3: subdevice #3
 Subdevice #4: subdevice #4
 Subdevice #5: subdevice #5
 Subdevice #6: subdevice #6
card 0: ALSA [bcm2835 ALSA], device 1: bcm2835 ALSA [bcm2835 IEC958/HDMI]
 Subdevices: 1/1
 Subdevice #0: subdevice #0
card 1: Control [Khadas Tone Control], device 0: USB Audio [USB Audio]
 Subdevices: 0/1
 Subdevice #0: subdevice #0