04-21-2019, 10:48 PM
(This post was last modified: 04-21-2019, 10:51 PM by Tim Curtis.
Edit Reason: eta
)
Not likely. Btw, you can have the pairing agent on. It's not involved in moOde --> speaker pair/connect.
I have this SoundCore model and no problems whatsoever.
https://www.anker.com/products/variant/s...r/A3102011
It could be a compatibility issue with the latest BlueZ 2.5 bluetooth stack that moOde 5 uses and your particular SoundCore Speaker model. Other possibilities are interference in the Bluetooth wireless band, signal attenuation due to enclosure or other environmentals, etc. Maybe even timing in moOde SCAN / TRUST / PAIR sequence.
You would need to run the scan, trust, pair sequence manually via ssh to see if its a timing issue.
I have this SoundCore model and no problems whatsoever.
https://www.anker.com/products/variant/s...r/A3102011
It could be a compatibility issue with the latest BlueZ 2.5 bluetooth stack that moOde 5 uses and your particular SoundCore Speaker model. Other possibilities are interference in the Bluetooth wireless band, signal attenuation due to enclosure or other environmentals, etc. Maybe even timing in moOde SCAN / TRUST / PAIR sequence.
You would need to run the scan, trust, pair sequence manually via ssh to see if its a timing issue.
