12-20-2018, 05:47 PM
(This post was last modified: 12-20-2018, 05:49 PM by superpat.
Edit Reason: added info
)
HI
Thanks to ear5142 for the idea and info!
If you follow the Oled part of the HOW-TO do guides] AUDIOPHONICS RaspDAC Mini Kit - I-Sabre ES9038Q2M, you can make many SPI and i2c OLED display with ANY DAC. You do not need to add the modified kernel
You must edit the python file to suit your Oled. ( spi or 2ic, ssd(number) width height etc Your Oled has to be one that the controller chip is supported by the Luma.oled library
I tried it with a new installation Moode 4.4 and a 3.1" 256 x 64 SSD1322 spi Oled. It worked fine once I got the wiring connected to the correct pins, (I need new spectacles!).
I am using a DAM1021 DAC. i2s connection only.
The TT fonts are especially nice looking
Here is a picture of it in use
cheers
P
Thanks to ear5142 for the idea and info!
If you follow the Oled part of the HOW-TO do guides] AUDIOPHONICS RaspDAC Mini Kit - I-Sabre ES9038Q2M, you can make many SPI and i2c OLED display with ANY DAC. You do not need to add the modified kernel
You must edit the python file to suit your Oled. ( spi or 2ic, ssd(number) width height etc Your Oled has to be one that the controller chip is supported by the Luma.oled library
I tried it with a new installation Moode 4.4 and a 3.1" 256 x 64 SSD1322 spi Oled. It worked fine once I got the wiring connected to the correct pins, (I need new spectacles!).
I am using a DAM1021 DAC. i2s connection only.
The TT fonts are especially nice looking
Here is a picture of it in use
cheers
P
