07-16-2018, 04:36 PM
Thank you for your donation!
and another ( CSS ? ) Display problem
|
07-16-2018, 06:17 PM
I wouldn't characterize this as a Display issue, but more likely a Browser cache or network issue.
To troubleshoot, reboot your Pi0 and then post the contents of System info. I'll have a look. Menu, Configure, System Menu, System info -Tim
07-16-2018, 07:12 PM
(07-16-2018, 06:17 PM)Tim Curtis Wrote: I wouldn't characterize this as a Display issue, but more likely a Browser cache or network issue. Thanks for the quick response. Here the System-Info S Y S T E M P A R A M E T E R S Date and time = 2018-07-16 21:05:53 System uptime = up 2 minutes Timezone = Europe/Berlin moOde = Release 4.2 2018-07-11 Host name = moode ETH0 IP = unassigned ETH0 MAC = no adapter WLAN0 IP = 192.168.0.172 WLAN0 MAC = b8:27:eb:36:d7:d2 WiFi country = DE HDWR REV = Pi-Zero W 512MB v1.1 SoC = BCM2835 CORES = 1 ARCH = armv6l RASPBIAN = 9.4 KERNEL = 4.14.54+ KTIMER FREQ = 100 Hz USB BOOT = not available Warranty = OK ROOT size = 15G ROOT used = 15% ROOT avail = 12G FS expand = expanded MEM free = 213 MB MEM used = 54 MB Temperature = 40.6°C CPU GOV = performance MPD SCHDPOL = TS P3-WIFI = On P3-BT = Off HDMI = Off ETH0 CHECK = On MAX USB CUR = Off UAC2 FIX = Off SSH server = Off LED0 = on LED1 = not accessible C O R E S E R V E R S PHP-FPM = 7.0.30 NGINX = 1.10.3 SQLite = 3.16.2 C P U L O A D CPU %usr %sys %idle all 0.50 0.00 99.50 0 0.50 0.00 99.50 P R O C E S S L O A D PRI RTPRIO COMMAND %MEM PSR %CPU 19 - sysinfo.sh 0.5 0 2.7 29 - mpd 5.4 0 2.6 19 - systemd 1.3 0 2.4 19 - systemd-journal 1.0 0 0.9 19 - kworker/0:1 0.0 0 0.7 19 - worker.php 2.4 0 0.7 19 - sudo 0.6 0 0.7 19 - systemd-udevd 0.7 0 0.6 19 - mmcqd/0 0.0 0 0.5 C L O C K F R E Q U E N C I E S arm = 1000 MHz pwm = 0 MHz core = 399 MHz emmc = 200 MHz h264 = 300 MHz pixel = 0 MHz isp = 300 MHz vec = 0 MHz v3d = 300 MHz hdmi = 0 MHz uart = 48 MHz dpi = 0 MHz SD card = 50 MHz S Y S T E M V O L T A G E S core = 1.3500V sdram controller = 1.2000V sdram I/O = 1.2000V sdram chip = 1.2250V U I C U S T O M I Z A T I O N S Theme = Standard Accent color = Emerald Alpha blend = 1.0 Adaptive background = No Background image = No Playback history = No Extra metadata = No Library = Artist A U D I O P A R A M E T E R S Audio device = JustBoom DAC HAT(Zero) Interface = I2S Hdwr volume = Controller detected Mixer name = Digital Output stream = Closed ALSA version = 1.1.3-5+rpi3 SoX version = 0.1.2-2 Volume knob = 100 Volume mute = Unmuted Bluetooth controller = Off Airplay receiver = Off Squeezelite = Off UPnP client = Off DLNA server = Off Rotary encoder = Off Encoder params = 100 2 3 4 5 Crossfeed = Off Parametric EQ = Off Graphic EQ = Off Auto-shuffle = Off Autoplay = Off MPD crossfade = Off M P D S E T T I N G S Version = 0.20.20 Volume control = hardware ALSA device = hw:0 SoX resampling = disabled SoX quality = very high SoX multithreading = off Audio buffer (kb) = 4096 Buffer before play = 10% Output buffer size (kb) = 81920 Volume normalization = no DSD over PCM (DoP) = no Replay gain = off B L U E T O O T H S E T T I N G S Bluetooth ver = 5.49 Bluealsa ver = Turn BT on for version info Speaker sharing = No Resume MPD = No A I R P L A Y S E T T I N G S Version = 3.1.7 Friendly name = Moode Airplay ALSA device = hw:0 Volume mixer = auto Resume MPD = No Output bit depth = S16 Output sample rate = 44100 Session interruption = no Session timeout (ms) = 120 Audio buffer (secs) = 0.0 S Q U E E Z E L I T E S E T T I N G S Version = 1.8.7-1052 "DSD/SRC enabled" Friendly name = Moode ALSA device = hw:0 ALSA params = 80:4::1 Output buffers = 40000:100000 Task priority = 45 Codec list = flac,pcm,mp3,ogg,aac,alac,dsd Resume MPD = No Other options = -W -D 500 -R E -S /var/loca M O O D E L O G 20180716 210348 worker: - Start 20180716 210349 worker: Successfully daemonized 20180716 210349 worker: Session loaded 20180716 210349 worker: Debug logging (off) 20180716 210349 worker: - Platform 20180716 210353 worker: Host (moode) 20180716 210353 worker: Hdwr (Pi-Zero W 512MB v1.1) 20180716 210353 worker: Arch (armv6l) 20180716 210353 worker: Rasp (9.4) 20180716 210353 worker: Kver (4.14.54+) 20180716 210353 worker: Ktyp (Standard) 20180716 210353 worker: Gov (performance) 20180716 210353 worker: Rel (Moode 4.2 2018-07-11) 20180716 210353 worker: Upd (None) 20180716 210353 worker: MPD (0.20.20) 20180716 210353 worker: USB boot not enabled yet 20180716 210353 worker: File system expanded 20180716 210353 worker: HDMI port off 20180716 210354 worker: File check ok 20180716 210354 worker: - Network 20180716 210354 worker: eth0 does not exist 20180716 210354 worker: eth0 address not assigned 20180716 210354 worker: wlan0 exists 20180716 210354 worker: wifi country (DE) 20180716 210354 worker: wlan0 trying SSID (UPCCCDFBDC) 20180716 210354 worker: wlan0 (192.168.0.172) 20180716 210354 worker: - Audio 20180716 210355 worker: ALSA outputs unmuted 20180716 210355 worker: ALSA card number (0) 20180716 210355 worker: Audio out (I2S audio device) 20180716 210355 worker: Audio dev (JustBoom DAC HAT(Zero)) 20180716 210356 worker: ALSA mixer name (Digital) 20180716 210356 worker: MPD volume control (hardware) 20180716 210357 worker: Hdwr volume controller exists 20180716 210358 worker: Chip options (Burr Brown PCM5122 (PCM5121)) 20180716 210358 worker: - Services 20180716 210358 worker: Reset renderer active 20180716 210400 worker: MPD started 20180716 210400 worker: MPD scheduler policy (time-share) 20180716 210400 worker: Configure MPD outputs 20180716 210401 worker: MPD output 1 ALSA default (on) 20180716 210401 worker: MPD output 2 ALSA crossfeed (off) 20180716 210401 worker: MPD output 3 ALSA parametric eq (off) 20180716 210401 worker: MPD output 4 ALSA graphic eq (off) 20180716 210401 worker: MPD output 5 ALSA bluetooth (off) 20180716 210401 worker: MPD crossfade (off) 20180716 210401 worker: - Music sources 20180716 210401 worker: USB sources (none attached) 20180716 210401 worker: NAS sources (mountall initiated) 20180716 210401 worker: - Miscellaneous 20180716 210402 worker: Volume level (100) restored 20180716 210402 worker: Maintenance interval (21600) 20180716 210402 worker: Screen saver timeout (Never) 20180716 210402 worker: Watchdog started 20180716 210402 worker: Ready
07-16-2018, 08:11 PM
I don't see anything suspicious in System info.
When type of client and Browser are u using? -Tim
07-16-2018, 08:31 PM
Hi
I'm on Win 10 , Vivaldi (chrome ). Its weird. Internet Explorer 11 doesn't work neither via moode.local nor IP-Adress (always blank screen ). But the new firefox does both well. BTW, I already run the build process twice, and haven't had this phenomenon on Version 4.1.
07-16-2018, 08:58 PM
Hi Jahannes,
The symptom suggests something external to moOde software. I have a 0W and no issues with either WiFi or BT. Maybe try running a 20 or 30 sec ping test from your client to the Pi and then see if there is anything unusual in the ping stats for example high % dropped packets, retries, really long round trip times, etc. What is your client hardware? -Tim
07-16-2018, 09:22 PM
I'll follow your advice tomorrow.
Do you mean with ' client hardware ' which Pi I'm using ? It's a PiZero.
07-16-2018, 10:10 PM
By Client I'm referring to the device you are using to open moOde UI in a Browser. Is it a PC, Mac, iPad, Android device, iPhone, etc.
07-16-2018, 10:34 PM
Oh, I see. It's a PC as well as a Android Device, ( on which the .local method won't work, I know )
|
« Next Oldest | Next Newest »
|