Posts: 13,363
Threads: 302
Joined: Mar 2018
Reputation:
538
(07-23-2020, 07:20 PM)jbajci Wrote: (07-23-2020, 07:03 PM)Tim Curtis Wrote: (07-23-2020, 06:08 PM)jbajci Wrote: (07-23-2020, 03:02 PM)Pixxel Wrote: Hi,
probably still some problem with Piano 2.1 + Kali. Moode reports without music:
Quote:MPD error Failed to open "ALSA default" (alsa); Failed to open ALSA device "hw:0,0": No such file or directory
Code: pi@moode:~ $ cat /var/log/moode.log
20200723 104759 worker: -- Start
20200723 104759 worker: Successfully daemonized
20200723 104800 worker: Integrity check (passed)
20200723 104800 worker: Session loaded
20200723 104800 worker: Debug logging (off)
20200723 104800 worker: Device raw: (0:empty|1:empty|2:empty|3:empty
20200723 104800 worker: Device i2s: (Allo Piano 2.1 Hi-Fi DAC)
20200723 104800 worker: Device mpd: (0:Allo Piano 2.1 Hi-Fi DAC)
20200723 104800 worker: Device ses: (0|Allo Piano 2.1 Hi-Fi DAC|Master|Invalid card number.%)
20200723 104800 worker: ALSA Master volume set to (Invalid card number.)
20200723 104800 worker: -- System
20200723 104803 worker: Host (moode)
20200723 104803 worker: moOde (6.7.1 2020-07-22)
20200723 104803 worker: RaspiOS (10.4)
20200723 104803 worker: Kernel (5.4.51-v7+ #1325)
20200723 104803 worker: Platform (Pi-3B+ 1GB v1.3)
20200723 104803 worker: ARM arch (armv7l, 32-bit kernel)
20200723 104803 worker: MPD ver (0.21.24)
20200723 104803 worker: CPU gov (ondemand)
20200723 104803 worker: USB boot enabled
20200723 104803 worker: File system not expanded yet
20200723 104804 worker: HDMI port on
20200723 104805 worker: File check (OK)
20200723 104805 worker: -- Network
20200723 104805 worker: eth0 exists
20200723 104805 worker: IP addr (192.168.1.102)
20200723 104805 worker: Netmask (255.255.255.0)
20200723 104806 worker: Gateway (192.168.1.1)
20200723 104806 worker: Pri DNS (192.168.1.1)
20200723 104806 worker: Domain (None)
20200723 104806 worker: wlan0 exists
20200723 104806 worker: wifi country (US)
20200723 104806 worker: wlan0 SSID is blank
20200723 104806 worker: eth0 addr exists, AP mode not started
20200723 104806 worker: wlan0 address not assigned
20200723 104806 worker: -- Audio
20200723 104807 worker: MPD conf updated
20200723 104807 worker: ALSA outputs unmuted
20200723 104807 worker: ALSA card number (0)
20200723 104807 worker: Audio output (Allo Piano 2.1 Hi-Fi DAC)
20200723 104808 worker: Audio formats (cat: /proc/asound/card0/pcm0p/sub0/hw_params: No such file or directory)
20200723 104808 worker: ALSA mixer name (Master)
20200723 104808 worker: MPD volume control (disabled)
20200723 104808 worker: Hdwr volume controller exists
20200723 104808 worker: Max ALSA volume (100%)
20200723 104808 worker: Piano output mode (Invalid card number.)
20200723 104809 worker: Piano 2.1 initialized
20200723 104809 worker: Reset renderer active flags
20200723 104809 worker: -- MPD
20200723 104809 worker: MPD started
20200723 104810 worker: MPD accepting connections
20200723 104810 worker: Configure MPD outputs
20200723 104810 worker: MPD output 1 ALSA default (on)
20200723 104810 worker: MPD output 2 ALSA crossfeed (off)
20200723 104810 worker: MPD output 3 ALSA parametric eq (off)
20200723 104810 worker: MPD output 4 ALSA graphic eq (off)
20200723 104810 worker: MPD output 5 ALSA polarity inversion (off)
20200723 104810 worker: MPD output 6 ALSA bluetooth (off)
20200723 104810 worker: MPD output 7 HTTP stream (off)
20200723 104810 worker: MPD crossfade (off)
20200723 104810 worker: -- Feature availability
20200723 104810 worker: Source select (available)
20200723 104810 worker: Source select (source: MPD)
20200723 104810 worker: Source select (output: Allo Piano 2.1 Hi-Fi DAC)
20200723 104811 worker: Bluetooth (available)
20200723 104811 worker: Airplay renderer (available)
20200723 104811 worker: Spotify renderer (available)
20200723 104811 worker: Squeezelite renderer (available)
20200723 104811 worker: UPnP renderer (available)
20200723 104811 worker: DLNA server (available)
20200723 104811 worker: UPnP browser (available)
20200723 104811 worker: Audio scrobbler (available)
20200723 104811 worker: GPIO button handler (available)
20200723 104811 worker: -- Music sources
20200723 104811 worker: USB source (AUDIOMALINA)
20200723 104811 worker: NAS and UPnP sources (none configured)
20200723 104811 worker: -- Miscellaneous
20200723 104811 worker: USB volume knob (Off)
20200723 104811 worker: USB auto-mounter (udisks-glue)
20200723 104811 worker: LED0 (On)
20200723 104811 worker: LED1 (On)
20200723 104811 worker: Saved MPD vol level (0)
20200723 104811 worker: Preamp volume level (0)
20200723 104812 worker: MPD volume level (0) restored
20200723 104812 worker: ALSA Master volume (Invalid card number.)
20200723 104812 worker: Auto-play (Off)
20200723 104812 worker: Maintenance interval (3 hrs)
20200723 104812 worker: Screen saver activation (Never)
20200723 104812 worker: Session permissions (OK)
20200723 104812 worker: Watchdog started
20200723 104812 worker: Ready
hi, i have the same
problem
Reboot and then post the output from the cmd below
pi@moode:~ $ dmesg | grep allo
[ 0.000000] pcpu-alloc: s89240 r8192 d29544 u126976 alloc=31*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] ftrace: allocating 31756 entries in 125 pages
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.024029] ASID allocator initialised with 32768 entries
[ 0.185970] DMA: preallocated 1024 KiB pool for atomic allocations
[ 5.840786] snd-allo-piano-dac-plus soc ound: ASoC: Neither/both codec name/of_node are set for PianoDACPlus
[ 5.840806] snd-allo-piano-dac-plus socound: ASoC: failed to init link PianoDACPlus: -22
[ 5.840818] snd-allo-piano-dac-plus socound: snd_soc_register_card() failed: -22
[ 5.840858] snd-allo-piano-dac-plus: probe of socound failed with error -22
I'm wondering whether this could be similar to another driver load issue where the Katana driver fails to load on a Pi-4B during boot and has to be loaded manually in rc.local.
Try below and see if the Piano 2.1 driver loads
Code: rmmod snd-allo-piano-dac-plus
rmmod snd_soc_audio_graph_card
modprobe snd_soc_audio_graph_card
modprobe snd-allo-piano-dac-plus
dmesg | grep allo
Posts: 39
Threads: 1
Joined: Jun 2020
Reputation:
0
Hi @TIM
any plans in future to add more themes which are bright and eye catchy.
"Serene sky " theme looks good to ne even though not much bluish i like. Can user add custom color theme?
Posts: 39
Threads: 1
Joined: Jun 2020
Reputation:
0
No sound from piano dac for me also, v 6.7.1
Just downgraded kernel to 4.19 ,to get it working with 6.7.1
Posts: 13,363
Threads: 302
Joined: Mar 2018
Reputation:
538
Did you try the manual driver load? If it fails to load manually then it indicates a kernel incompatibility and should be reported to Allo.
Post the hex color codes (background and accent color) and proposed name for your desired Theme(s) and I'll have a look.
Posts: 17
Threads: 0
Joined: Dec 2018
Reputation:
0
07-25-2020, 02:01 PM
(This post was last modified: 07-25-2020, 03:28 PM by andib.
Edit Reason: Supplement
)
(07-24-2020, 05:21 PM)Tim Curtis Wrote: This log entry shows card 0 is empty
Code: 20200724 114520 worker: Device raw: (0:Headphones|1:empty|2:empty|3:empty
It should look like below. Device "b1" is the HDMI port. That log was from the Pi-3B+ thats used to host the stock moOde image.
Code: 20200723 161755 worker: Device raw: (0:b1|1:Headphones|2:empty|3:empty
It's not obvious to me what's going on on your end.
Yeah, I don't know that either  . I tried it with version 6.7.1 and a raspberry pi 2. same result .... probably there is something special with HDMI, with the audiojack a the transmission is ok.
I'm now also trying with a Pi-3B+ and get back to you ....
1 Hour later: I just tried Raspberry Pi-3B+:It doesn't work for me with the HDMI on the Denon X4100W either. Again, to be clear, everything works, but no audio on the stereo (Denon X4100W) via HDMI.
Then I tried Moode 6.5.2 on the same setup (Pi-3B+) (Kernel 4.19). This version runs from the first boot perfectly with audio output over HDMI !
Posts: 39
Threads: 1
Joined: Jun 2020
Reputation:
0
(07-25-2020, 01:22 PM)Tim Curtis Wrote: Did you try the manual driver load? If it fails to load manually then it indicates a kernel incompatibility and should be reported to Allo.
Post the hex color codes (background and accent color) and proposed name for your desired Theme(s) and I'll have a look.
pi@moode:~ $ rmmod snd-allo-piano-dac-plus
rmmod: ERROR: Module snd_allo_piano_dac_plus is not currently loaded
pi@moode:~ $ modprobe snd-allo-piano-dac-plus
modprobe: FATAL: Module snd-allo-piano-dac-plus not found in directory /lib/modules/5.4.51-v7l+
as you sad drivers incampatability to be reported to allo (how to report?)
#78fff9
#00fff4 background
#8001ea accent colour
or any theme in upcomig series ...
as with above choice of colours how other layout elements look (is unknown to me
Posts: 13,363
Threads: 302
Joined: Mar 2018
Reputation:
538
(07-25-2020, 02:01 PM)andib Wrote: (07-24-2020, 05:21 PM)Tim Curtis Wrote: This log entry shows card 0 is empty
Code: 20200724 114520 worker: Device raw: (0:Headphones|1:empty|2:empty|3:empty
It should look like below. Device "b1" is the HDMI port. That log was from the Pi-3B+ thats used to host the stock moOde image.
Code: 20200723 161755 worker: Device raw: (0:b1|1:Headphones|2:empty|3:empty
It's not obvious to me what's going on on your end.
Yeah, I don't know that either . I tried it with version 6.7.1 and a raspberry pi 2. same result .... probably there is something special with HDMI, with the audiojack a the transmission is ok.
I'm now also trying with a Pi-3B+ and get back to you ....
1 Hour later: I just tried Raspberry Pi-3B+:It doesn't work for me with the HDMI on the Denon X4100W either. Again, to be clear, everything works, but no audio on the stereo (Denon X4100W) via HDMI.
Then I tried Moode 6.5.2 on the same setup (Pi-3B+) (Kernel 4.19). This version runs from the first boot perfectly with audio output over HDMI !
Try editing /boot/config.txt and comment out the lines below (put # in front of each line), then reboot
#hdmi_force_edid_audio=1
#hdmi_force_hotplug=1
#hdmi_group=1
Posts: 17
Threads: 0
Joined: Dec 2018
Reputation:
0
(07-25-2020, 04:36 PM)Tim Curtis Wrote: (07-25-2020, 02:01 PM)andib Wrote: (07-24-2020, 05:21 PM)Tim Curtis Wrote: This log entry shows card 0 is empty
Code: 20200724 114520 worker: Device raw: (0:Headphones|1:empty|2:empty|3:empty
It should look like below. Device "b1" is the HDMI port. That log was from the Pi-3B+ thats used to host the stock moOde image.
Code: 20200723 161755 worker: Device raw: (0:b1|1:Headphones|2:empty|3:empty
It's not obvious to me what's going on on your end.
Yeah, I don't know that either . I tried it with version 6.7.1 and a raspberry pi 2. same result .... probably there is something special with HDMI, with the audiojack a the transmission is ok.
I'm now also trying with a Pi-3B+ and get back to you ....
1 Hour later: I just tried Raspberry Pi-3B+:It doesn't work for me with the HDMI on the Denon X4100W either. Again, to be clear, everything works, but no audio on the stereo (Denon X4100W) via HDMI.
Then I tried Moode 6.5.2 on the same setup (Pi-3B+) (Kernel 4.19). This version runs from the first boot perfectly with audio output over HDMI !
Try editing /boot/config.txt and comment out the lines below (put # in front of each line), then reboot
#hdmi_force_edid_audio=1
#hdmi_force_hotplug=1
#hdmi_group=1
I have edited /boot/config.txt, loks like this:
Code: GNU nano 3.2 /boot/config.txt
disable_splash=1
disable_overscan=1
hdmi_drive=2
hdmi_blanking=1
#hdmi_force_edid_audio=1
#hdmi_force_hotplug=1
#hdmi_group=1
dtparam=i2c_arm=on
dtparam=i2s=on
dtparam=audio=on
#dtoverlay=disable-wifi
#dtoverlay=disable-bt
Restart Raspberry Pi-3B+ -> No Sound over HDMI
System Information 6.7.1 looks like this after restart
Code: S Y S T E M P A R A M E T E R S
moOde release = 6.7.1 2020-07-22
RaspiOS = 10.4
Linux kernel = 5.4.51-v7+ #1325
Platform = Pi-3B+ 1GB v1.3
Architecture = armv7l (32-bit)
System uptime = up 3 minutes
Timezone = America/Detroit
Current time = 2020-07-25 13:54:39
Host name = moode
Ethernet address = 192.168.0.164
Ethernet MAC = b8:27:eb:75:ef:a9
WLAN address = unassigned
WLAN MAC = b8:27:eb:20:ba:fc
WLAN country = US
SoC identifier = bcm2837
Core count = 4
Kernel timer freq = 100 Hz
SDCard freq = 50 MHz
USB boot = enabled
Warranty = OK
Root size = 3.4G
Root used = 80%
Root available = 672M
Root expand = not expanded
Memory free = 692 MB
Memory used = 81 MB
SoC temperature = 51.5°C
CPU governor = ondemand
Onboard WiFi = On
Onboard BT = On
HDMI output = On
LED state = 1,1
Eth addr wait = On
Max USB current = Off
USB (UAC2) fix = Off
Pi-3B+ eth fix = Off
SSH term server = Off
PHP-FPM version = 7.3.14
NGINX version = 1.14.2
SQLite3 version = 3.27.2
Hostapd version = 2.8-devel
WiringPi version = 2.50
RPi.GPIO version = 0.7.0
A U D I O P A R A M E T E R S
Audio device = On-board audio device
Interface = SoC
Mixer name = Headphone
Hardware volume = Controller detected
Max ALSA volume = 100
Max MPD volume = 100
Volume step limit = 10
Audio source = Local
Output device = Local
Resume MPD = No
Volume knob = 96
Volume mute = Unmuted
Saved MPD vol = 0
Preamp volume = 0
ALSA version = 1.1.8-1+rpt1
SoX version = 0.1.2-3
Bluetooth controller = Off
Pairing agent = Off
Airplay receiver = Off
Spotify receiver = Off
Squeezelite = Off
UPnP client = Off
DLNA server = Off
GPIO button handler = Off
UPnP browser = Off
Auto-shuffle = Off
Autoplay = Off
Rotary encoder = Off
Encoder params = 100 2 3 23 24
USB volume knob = Off
Polarity inversion = Off
Crossfeed = Off
Crossfade = Off
Parametric EQ = Off
Graphic EQ = Off
MPD httpd = Off
A P P E A R A N C E S E T T I N G S
Themes and backgrounds
----------------------
Theme = Default
Accent color = Emerald
Alpha blend = 1.0
Adaptive background = No
Background image = No
Cover backdrop = No
Cover blur = 20px
Cover scale = 1.25
Library options
----------------------
Instant play action = Add/Play
Show tagview genres = Yes
Show tagview covers = Yes
Show sample rate = No
Ellipsis limited text = No
Thumbnail columns = 6/2 (Default)
Albumview sort order = by Artist
Tagview sort order = by Artist
Compilation identifier = Various Artists
Recently added = 1 Month
Ignore articles = a,an,the
UTF8 character filter = No
Hi-res thumbs = Auto
Cover search pri = Embedded cover
Pixel ratio = 1.25
Coverview screen saver
----------------------
CoverView auto-display = Never
CoverView style = Gradient (Linear)
Other options
----------------------
Font size = Normal
Auto-shuffle filter = None
Extra metadata = track,disc,date,composer,encoded
Playback history = No
First use help = y,y
M P D S E T T I N G S
Version = 0.21.24
Volume control = software
ALSA device = hw:0
SoX resampling = disabled
SoX quality = very high
SoX multithreading = off
DSD over PCM (DoP) = no
Replaygain = off
Replaygain preamp = 0
Volume normalization = No
Audio buffer = 4096 (kb)
Output buffer size = 131072 (kb)
B L U E T O O T H S E T T I N G S
Bluetooth ver = 5.50
Bluealsa ver = v2.1.0
Speaker sharing = No
Resume MPD = No
PCM buffer time = 500000 (µs)
A I R P L A Y S E T T I N G S
Version = 3.3.6
Friendly name = Moode Airplay
ALSA device = hw:0
Interpolation = soxr
Output bit depth = S16
Output sample rate = 44100
Session interruption = no
Session timeout = 120 (ms)
Latency offset = 0.0 (secs)
Audio buffer = 0.2 (secs)
Resume MPD = No
S P O T I F Y S E T T I N G S
Friendly name = Moode Spotify
ALSA device = plughw:0
Bit rate = 160
Initial volume = 0
Volume curve = Logarithmic
Volume normalization = No
Normalization pregain = 0
Autoplay = No
Resume MPD = No
S Q U E E Z E L I T E S E T T I N G S
Version = 1.8.7-1052 "DSD/SRC enabled"
Friendly name = Moode
ALSA device = hw:0
ALSA params = 80:4::1
Output buffers = 40000:100000
Task priority = 45
Codec list = flac,pcm,mp3,ogg,aac,alac,dsd
Other options = -W -D 500 -R E -S /var/local
Resume MPD = No
L O C A L D I S P L A Y S E T T I N G S
Local UI display = Off
Mouse cursor = On
Screen blank = 600 Secs
Wake display on play = Off
Brightness = 255
Pixel aspect ratio = Default
Rotate screen = 0 Deg
M O O D E S T A R T U P L O G
20200725 135112 worker: -- Start
20200725 135112 worker: Successfully daemonized
20200725 135112 worker: Integrity check (passed)
20200725 135112 worker: Session loaded
20200725 135112 worker: Debug logging (off)
20200725 135112 worker: Device raw: (0:Headphones|1:empty|2:empty|3:empty
20200725 135112 worker: Device i2s: (none)
20200725 135112 worker: Device mpd: (0:Pi Headphone jack)
20200725 135112 worker: Device ses: (0|Pi Headphone jack|Headphone|0%)
20200725 135113 worker: ALSA Headphone volume set to (0%)
20200725 135113 worker: -- System
20200725 135114 worker: Host (moode)
20200725 135114 worker: moOde (6.7.1 2020-07-22)
20200725 135114 worker: RaspiOS (10.4)
20200725 135114 worker: Kernel (5.4.51-v7+ #1325)
20200725 135114 worker: Platform (Pi-3B+ 1GB v1.3)
20200725 135114 worker: ARM arch (armv7l, 32-bit kernel)
20200725 135114 worker: MPD ver (0.21.24)
20200725 135114 worker: CPU gov (ondemand)
20200725 135115 worker: USB boot enabled
20200725 135115 worker: File system not expanded yet
20200725 135115 worker: HDMI port on
20200725 135116 worker: File check (OK)
20200725 135116 worker: -- Network
20200725 135116 worker: eth0 exists
20200725 135116 worker: IP addr (192.168.0.164)
20200725 135116 worker: Netmask (255.255.255.0)
20200725 135116 worker: Gateway (192.168.0.1)
20200725 135116 worker: Pri DNS (192.168.0.6)
20200725 135116 worker: Domain (hoob.ch)
20200725 135116 worker: wlan0 exists
20200725 135116 worker: wifi country (US)
20200725 135116 worker: wlan0 SSID is blank
20200725 135116 worker: eth0 addr exists, AP mode not started
20200725 135116 worker: wlan0 address not assigned
20200725 135116 worker: -- Audio
20200725 135117 worker: MPD conf updated
20200725 135117 worker: ALSA outputs unmuted
20200725 135117 worker: ALSA card number (0)
20200725 135118 worker: Audio output (Pi Headphone jack)
20200725 135118 worker: Audio formats (U8, S16_LE)
20200725 135118 worker: ALSA mixer name (Headphone)
20200725 135118 worker: MPD volume control (software)
20200725 135118 worker: Hdwr volume controller exists
20200725 135118 worker: Max ALSA volume (100%)
20200725 135118 worker: Reset renderer active flags
20200725 135118 worker: -- MPD
20200725 135118 worker: MPD started
20200725 135119 worker: MPD accepting connections
20200725 135119 worker: Configure MPD outputs
20200725 135119 worker: MPD output 1 ALSA default (on)
20200725 135119 worker: MPD output 2 ALSA crossfeed (off)
20200725 135119 worker: MPD output 3 ALSA parametric eq (off)
20200725 135119 worker: MPD output 4 ALSA graphic eq (off)
20200725 135119 worker: MPD output 5 ALSA polarity inversion (off)
20200725 135119 worker: MPD output 6 ALSA bluetooth (off)
20200725 135119 worker: MPD output 7 HTTP stream (off)
20200725 135119 worker: MPD crossfade (off)
20200725 135119 worker: -- Feature availability
20200725 135119 worker: Source select (available)
20200725 135119 worker: Source select (source: MPD)
20200725 135120 worker: Source select (output: Pi Headphone jack)
20200725 135120 worker: Bluetooth (available)
20200725 135120 worker: Airplay renderer (available)
20200725 135120 worker: Spotify renderer (available)
20200725 135120 worker: Squeezelite renderer (available)
20200725 135120 worker: UPnP renderer (available)
20200725 135120 worker: DLNA server (available)
20200725 135120 worker: UPnP browser (available)
20200725 135120 worker: Audio scrobbler (available)
20200725 135120 worker: GPIO button handler (available)
20200725 135120 worker: -- Music sources
20200725 135120 worker: USB sources (none attached)
20200725 135120 worker: NAS and UPnP sources (none configured)
20200725 135120 worker: -- Miscellaneous
20200725 135120 worker: USB volume knob (Off)
20200725 135120 worker: USB auto-mounter (udisks-glue)
20200725 135120 worker: LED0 (On)
20200725 135120 worker: LED1 (On)
20200725 135120 worker: Saved MPD vol level (0)
20200725 135120 worker: Preamp volume level (0)
20200725 135120 worker: MPD volume level (96) restored
20200725 135120 worker: ALSA Headphone volume (100%)
20200725 135120 worker: Auto-play (Off)
20200725 135120 worker: Maintenance interval (3 hrs)
20200725 135120 worker: Screen saver activation (Never)
20200725 135120 worker: Session permissions (OK)
20200725 135120 worker: Watchdog started
20200725 135120 worker: Ready
Same Raspberry pi with moode 6.5.2 -> Sound over HDMI is ok
/boot/config.txt, loks like this (not edited):
Code: disable_splash=1
disable_overscan=1
hdmi_drive=2
hdmi_blanking=1
dtparam=i2c_arm=on
dtparam=i2s=on
dtparam=audio=on
#dtoverlay=pi3-disable-wifi
#dtoverlay=pi3-disable-bt
System Information 6.5.2 looks like this after restart
Code: S Y S T E M P A R A M E T E R S
moOde release = 6.5.2 2020-05-03
Raspbian OS = 10.3
Linux kernel = 4.19.115-v7+ #1305
Platform = Pi-3B+ 1GB v1.3
Architecture = armv7l (32-bit)
System uptime = up 2 minutes
Timezone = America/Detroit
Current time = 2020-07-25 14:02:48
Host name = moode
Ethernet address = 192.168.0.164
Ethernet MAC = b8:27:eb:75:ef:a9
WLAN address = unassigned
WLAN MAC = b8:27:eb:20:ba:fc
WLAN country = US
SoC identifier = bcm2837
Core count = 4
Kernel timer freq = 100 Hz
SDCard freq = 50 MHz
USB boot = enabled
Warranty = OK
Root size = 3.4G
Root used = 79%
Root available = 703M
Root expand = not expanded
Memory free = 671 MB
Memory used = 92 MB
SoC temperature = 50.5°C
CPU governor = ondemand
Onboard WiFi = On
Onboard BT = On
HDMI output = On
LED state = 1,1
Eth addr wait = On
Max USB current = Off
USB (UAC2) fix = Off
Pi-3B+ eth fix = Off
SSH term server = Off
PHP-FPM version = 7.3.11
NGINX version = 1.14.2
SQLite3 version = 3.27.2
Hostapd version = 2.8-devel
WiringPi version = 2.50
RPi.GPIO version = 0.7.0
A U D I O P A R A M E T E R S
Audio device = On-board audio device
Interface = SoC
Mixer name = PCM
Hardware volume = Controller detected
Max ALSA volume = 100
Max MPD volume = 100
Volume step limit = 10
Audio source = Local
Output device = Local
Resume MPD = No
Volume knob = 94
Volume mute = Unmuted
Saved MPD vol = 0
Preamp volume = 0
ALSA version = 1.1.8-1+rpt1
SoX version = 0.1.2-3
Bluetooth controller = Off
Pairing agent = Off
Airplay receiver = Off
Spotify receiver = Off
Squeezelite = Off
UPnP client = Off
DLNA server = Off
GPIO button handler = Off
UPnP browser = Off
Auto-shuffle = Off
Autoplay = Off
Rotary encoder = Off
Encoder params = 100 2 3 23 24
USB volume knob = Off
Polarity inversion = Off
Crossfeed = Off
Crossfade = Off
Parametric EQ = Off
Graphic EQ = Off
MPD httpd = Off
A P P E A R A N C E S E T T I N G S
Themes and backgrounds
----------------------
Theme = Default
Accent color = Emerald
Alpha blend = 1.0
Adaptive background = No
Background image = No
Cover backdrop = No
Cover blur = 20px
Cover scale = 1.25
Library options
----------------------
Instant play action = Add/Play
Show tagview genres = Yes
Show tagview covers = Yes
Ellipsis limited text = No
Albumview sort order = by Artist
Tagview sort order = by Artist
Compilation identifier = Various Artists
Recently added = 1 Month
Ignore articles = a,an,the
UTF8 character filter = No
Hi-res thumbs = Auto
Cover search pri = Embedded cover
Pixel ratio = 1.25
Coverview screen saver
----------------------
CoverView auto-display = Never
CoverView style = Gradient (Linear)
Other options
----------------------
Font size = Normal
Auto-shuffle filter = None
Extra metadata = track,disc,date,composer,encoded
Playback history = No
M P D S E T T I N G S
Version = 0.21.22
Volume control = software
ALSA device = hw:0
SoX resampling = disabled
SoX quality = very high
SoX multithreading = off
DSD over PCM (DoP) = no
Replaygain = off
Replaygain preamp = 0
Volume normalization = No
Audio buffer = 4096 (kb)
Output buffer size = 131072 (kb)
B L U E T O O T H S E T T I N G S
Bluetooth ver = 5.50
Bluealsa ver = 2.0.0
Speaker sharing = No
Resume MPD = No
PCM buffer time = 500000 (µs)
A I R P L A Y S E T T I N G S
Version = 3.3.6
Friendly name = Moode Airplay
ALSA device = hw:0
Interpolation = soxr
Output bit depth = S16
Output sample rate = 44100
Session interruption = no
Session timeout = 120 (ms)
Latency offset = 0.0 (secs)
Audio buffer = 0.2 (secs)
Resume MPD = No
S P O T I F Y S E T T I N G S
Friendly name = Moode Spotify
ALSA device = plughw:0
Bit rate = 160
Initial volume = 0
Volume curve = Logarithmic
Volume normalization = No
Normalization pregain = 0
Autoplay = No
Resume MPD = No
S Q U E E Z E L I T E S E T T I N G S
Version = 1.8.7-1052 "DSD/SRC enabled"
Friendly name = Moode
ALSA device = hw:0
ALSA params = 80:4::1
Output buffers = 40000:100000
Task priority = 45
Codec list = flac,pcm,mp3,ogg,aac,alac,dsd
Other options = -W -D 500 -R E -S /var/local
Resume MPD = No
L O C A L D I S P L A Y S E T T I N G S
Local UI display = Off
Mouse cursor = On
Screen blank = 600 Secs
Wake display on play = Off
Brightness = 255
Pixel aspect ratio = Default
Rotate screen = 0 Deg
M O O D E S T A R T U P L O G
20200725 112512 worker: -- Start
20200725 112512 worker: Successfully daemonized
20200725 112512 worker: Integrity check (passed)
20200725 112512 worker: Session loaded
20200725 112512 worker: Debug logging (off)
20200725 112512 worker: Device raw: (0:ALSA|1:empty|i2s:none)
20200725 112512 worker: Device cfg: (On-board audio device|0|0|PCM|0)
20200725 112512 worker: ALSA volume set to (0%)
20200725 112513 worker: -- System
20200725 112514 worker: Host (moode)
20200725 112514 worker: moOde (6.5.2 2020-05-03)
20200725 112514 worker: Raspbian (10.3)
20200725 112514 worker: Kernel (4.19.115-v7+ #1305)
20200725 112514 worker: Platform (Pi-3B+ 1GB v1.3)
20200725 112514 worker: ARM arch (armv7l, 32-bit kernel)
20200725 112514 worker: MPD ver (0.21.22)
20200725 112514 worker: CPU gov (ondemand)
20200725 112514 worker: USB boot enabled
20200725 112514 worker: File system not expanded yet
20200725 112515 worker: HDMI port on
20200725 112515 worker: File check (OK)
20200725 112515 worker: -- Network
20200725 112515 worker: eth0 exists
20200725 112515 worker: IP addr (192.168.0.164)
20200725 112516 worker: Netmask (255.255.255.0)
20200725 112516 worker: Gateway (192.168.0.1)
20200725 112516 worker: Pri DNS (192.168.0.6)
20200725 112516 worker: Domain (hoob.ch)
20200725 112516 worker: wlan0 exists
20200725 112516 worker: wifi country (US)
20200725 112516 worker: wlan0 SSID is blank
20200725 112516 worker: eth0 addr exists, AP mode not started
20200725 112516 worker: wlan0 address not assigned
20200725 112516 worker: -- Audio
20200725 112516 worker: ALSA outputs unmuted
20200725 112516 worker: ALSA card number (0)
20200725 112516 worker: Audio output (On-board audio device)
20200725 112516 worker: Audio formats (U8, S16_LE)
20200725 112517 worker: ALSA mixer name (PCM)
20200725 112517 worker: MPD volume control (software)
20200725 112517 worker: Hdwr volume controller exists
20200725 112517 worker: Max ALSA volume (100%)
20200725 112517 worker: Reset renderer active flags
20200725 112517 worker: -- MPD
20200725 112517 worker: MPD conf updated
20200725 112517 worker: MPD started
20200725 112518 worker: MPD accepting connections
20200725 112518 worker: Configure MPD outputs
20200725 112518 worker: MPD output 1 ALSA default (on)
20200725 112518 worker: MPD output 2 ALSA crossfeed (off)
20200725 112518 worker: MPD output 3 ALSA parametric eq (off)
20200725 112518 worker: MPD output 4 ALSA graphic eq (off)
20200725 112518 worker: MPD output 5 ALSA polarity inversion (off)
20200725 112518 worker: MPD output 6 ALSA bluetooth (off)
20200725 112518 worker: MPD output 7 HTTP stream (off)
20200725 112518 worker: MPD crossfade (off)
20200725 112518 worker: -- Feature availability
20200725 112518 worker: Source select (available)
20200725 112518 worker: Source select (source: MPD)
20200725 112518 worker: Source select (output: On-board audio device)
20200725 112518 worker: Bluetooth (available)
20200725 112518 worker: Airplay renderer (available)
20200725 112518 worker: Spotify renderer (available)
20200725 112518 worker: Squeezelite renderer (available)
20200725 112518 worker: UPnP renderer (available)
20200725 112518 worker: DLNA server (available)
20200725 112518 worker: UPnP browser (available)
20200725 112518 worker: Audio scrobbler (available)
20200725 112518 worker: GPIO button handler (available)
20200725 112518 worker: -- Music sources
20200725 112518 worker: USB sources (none attached)
20200725 112518 worker: NAS and UPnP sources (none configured)
20200725 112518 worker: -- Miscellaneous
20200725 112518 worker: USB volume knob (Off)
20200725 112518 worker: USB auto-mounter (udisks-glue)
20200725 112518 worker: LED0 (On)
20200725 112518 worker: LED1 (On)
20200725 112518 worker: Saved MPD vol level (0)
20200725 112518 worker: Preamp volume level (0)
20200725 112519 worker: MPD volume level (94) restored
20200725 112519 worker: ALSA volume level (100%)
20200725 112519 worker: Auto-play (Off)
20200725 112519 worker: Maintenance interval (3 hrs)
20200725 112519 worker: Screen saver activation (Never)
20200725 112519 worker: Session permissions (OK)
20200725 112519 worker: Watchdog started
20200725 112519 worker: Ready
Can I provide you with more information?
Posts: 13,363
Threads: 302
Joined: Mar 2018
Reputation:
538
Below is what should appear booting stock moOde 6.7.1 on a 3B+. Card 0 will be assigned by Linux the ID "b1" which represents the integrated HDMI port 1.
Code: 20200725 084555 worker: Device raw: (0:b1|1:Headphones|2:empty|3:empty
I'm not able to repro the issue you are experiencing where Linux never assigns the HDMI port.
Posts: 17
Threads: 0
Joined: Dec 2018
Reputation:
0
Thank you for your help TIM!
Yes it looks like the HDMI is not recognised by the 5.4 Linux
Here is an other Output:
Pi 6.5.2
Code: pi@moode:~ $ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: ALSA [bcm2835 ALSA], device 0: bcm2835 ALSA [bcm2835 ALSA]
Subdevices: 7/7
Subdevice #0: subdevice #0
Subdevice #1: subdevice #1
Subdevice #2: subdevice #2
Subdevice #3: subdevice #3
Subdevice #4: subdevice #4
Subdevice #5: subdevice #5
Subdevice #6: subdevice #6
card 0: ALSA [bcm2835 ALSA], device 1: bcm2835 IEC958/HDMI [bcm2835 IEC958/HDMI]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: ALSA [bcm2835 ALSA], device 2: bcm2835 IEC958/HDMI1 [bcm2835 IEC958/HDMI1]
Subdevices: 1/1
Subdevice #0: subdevice #0
In Pi 6.7.1
Code: pi@moode:~ $ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: Headphones [bcm2835 Headphones], device 0: bcm2835 Headphones [bcm2835 H eadphones]
Subdevices: 8/8
Subdevice #0: subdevice #0
Subdevice #1: subdevice #1
Subdevice #2: subdevice #2
Subdevice #3: subdevice #3
Subdevice #4: subdevice #4
Subdevice #5: subdevice #5
Subdevice #6: subdevice #6
Subdevice #7: subdevice #7
waiting for the next kernel ..... ?
|
