Thank you for your donation!
|
Connect to other moOde players
|
Can someone explain "Connect to other moOde players"? Is it for syncing multiple players? When I have a couple players running and access the >>Players function this menu is displayed:
Clicking on either of these links to http://198.105.254.23/ which is not the address of either player. Thanks in advance. energyi 
04-10-2018, 03:12 PM
Its for switching to other players UI. It uses multicast DNS to discover the other players and then a certain Linux command to determine the players IP address.
Try running the commands below and then post the output pi@rp3:~ $ avahi-browse -a -t | awk '/IPv4/ && /moOde audio player:/ {print $7}' | sort moode rp1 rp2 rp3 rp4 rp5 pi@rp3:~ $ getent hosts rp1 192.168.1.170 rp1 pi@rp3:~ $ -Tim
04-10-2018, 05:23 PM
(04-10-2018, 03:12 PM)Tim Curtis Wrote: Try running the commands below and then post the output moode moode-3 <and> 198.105.254.23 rp1getent.Home 198.105.244.23 rp1getent.Home 198.105.254.23 hosts.Home 198.105.244.23 hosts.Home 198.105.254.23 rp1.Home 198.105.244.23 rp1.Home energyi
04-10-2018, 06:05 PM
(04-10-2018, 05:23 PM)energyi Wrote:(04-10-2018, 03:12 PM)Tim Curtis Wrote: Try running the commands below and then post the output @energyi So what are the actual IP addresses for your moOde players and on what host did you execute these CLI (command-line interface) commands? Your output, both in the image you posted earlier and here, looks a bit wonky. The image says the moOde player you were on detected two players, both named moode-3; the first CLI output you give says there are two players, named moode and moode-3; the second CLI output you show has doubled entries for each host.domain name listed but it gives the appearance that getent wasn't asked about hostnames moode or moode-3. At the moment, I have three moOde r41 players attached to my LAN; their hostnames are moode, moode-41h, and moode-up. From the UI of moode-41h, I get moode and moode-up displayed in the Players popup. From the command line Code: pi@moode-41h:~ $ avahi-browse -a -t | awk '/IPv4/ && /moOde audio player:/ {print $7}' | sortAs you see, there is no doubling of entries here. Regards, Kent
04-10-2018, 06:10 PM
(This post was last modified: 04-10-2018, 06:11 PM by Tim Curtis.)
(04-10-2018, 05:23 PM)energyi Wrote:(04-10-2018, 03:12 PM)Tim Curtis Wrote: Try running the commands below and then post the output Hi, It found your 2 moOde hosts. :-) Next, run commands below and post back. Thx. getent hosts moode getent hosts moode-3 -Tim
04-10-2018, 06:39 PM
getent hosts moode
getent hosts moode-3 -Tim 127.0.1.1 moode <and> 198.105.254.23 moode-3.Home 198.105.244.23 moode-3.Home Address on first is 198.168.0.13 Don't sweat this, not critical, just curious. energyi
04-11-2018, 11:45 AM
I have two instances of moOde running on my network.
When both were on 4.0 when I clicked the Players option the pop-up show both moOde players (and osmc). Selecting the second player however gave no response. The only response I got was while using certain browsers (Firefox on iOS, various Desktop browsers) selecting the local player directed to an IP address (not either players' address though) and timed out. Now both players are running 4.1 but nothing appears in the Players pop-up. Running the code below gives no results. Code: avahi-browse -a -t | awk '/IPv4/ && /moOde audio player:/ {print $7}' | sortWhen I run Code: avahi-browse -a -tCode: + wlan0 IPv6 Samsung ML-1660 Series @ PiServer _ipps._tcp local
04-11-2018, 12:25 PM
Hi,
This is due to a bug in the in-place update package (missing config file). Try adding the file: /etc/avahi/services/moode.service 1. sudo nano /etc/avahi/services/moode.service 2. paste the code below into the empty file 3. Ctrl-o <return> Ctrl-x to save the file 4. Reboot <?xml version="1.0" standalone='no'?><!--*-nxml-*--> <!DOCTYPE service-group SYSTEM "avahi-service.dtd"> <service-group> <name replace-wildcards="yes">moOde audio player: %h</name> <service> <type>_http._tcp</type> <port>80</port> </service> </service-group> -Tim (04-11-2018, 12:25 PM)Tim Curtis Wrote: 2. paste the code below into the empty file File not empty: GNU nano 2.7.4 File: /etc/avahi/services/moode.service <?xml version="1.0" standalone='no'?><!--*-nxml-*--> <!DOCTYPE service-group SYSTEM "avahi-service.dtd"> <service-group> <name replace-wildcards="yes">moOde audio player: %h</name> <service> <type>_http._tcp</type> <port>80</port> </service> </service-group> energyi
04-11-2018, 03:01 PM
(This post was last modified: 04-11-2018, 03:01 PM by Tim Curtis.)
If the file exists the it should look exactly like below.
Code: pi@rp3:~ $ cat /etc/avahi/services/moode.service |
|
« Next Oldest | Next Newest »
|
