Thank you for your donation!


Cloudsmith graciously provides open-source package management and distribution for our project.


Instruction Guide 128x64 OLED with Song Status and Spectrum Display on Raspberry Pi
(03-22-2021, 08:23 PM)adrii Wrote: Hi officialsm

Install the mpd_oled service with

Code:
sudo mpd_oled_service_edit -o 6 -b 10 -g 1 -f 20 -c alsa,hw:Loopback,1

Then it will start at boot.

Adrian.

i have this error:

pi@Simoode-audio:~/mpd_oled_moode_audio_copy_scripts $ sudo mpd_oled_service_edit -o 6 -b 10 -g 1 -f 20 -c alsa,hw:Loopback,1

sudo: mpd_oled_service_edit: command not found
Reply
Hi officialsm

Either install the latest mpd_oled and use 'mpd_oled_service_edit', or if you are using an old version then use the old instructions: https://github.com/antiprism/mpd_oled/bl...l-mpd_oled

Adrian.
Reply
Hi Adrian,

ok it's working but has problem.
I installed it from source 7, until your mark "UPDATE FOR MOODE 7.1" then I installed the ALSA script with your
Code:
sudo bash mpd_oled_moode_audio_copy_install

worked great. (enabled paramEQ)

Then I had to go back to this page to install the service
Code:
sudo mpd_oled_service_install

then I entered
Code:
sudo mpd_oled_service_edit -o 6 -b 10 -g 1 -f 20 -c alsa,hw:Loopback,1

And it worked.

But, if you start with low volume, I had mine at 15, the bars will be barely visible, only after 2 minutes they will reach a normal size.
If you raise the volume to 50, the bars grow even taller, but as soon you go back to 15, the bars become flat again and it takes again 2 minutes to reach a normal size.

This is not the behavior we used to see before.
Reply
Hi Alain

The instructions are different for installing the mpd_oled package and for installing mpd_oled from source, as the package is configured to run 'mpd_oled_service_install' when it is being installed.

The old audio copy method had MPD make the copy, so the system volume probably wasn't involved. I don't see any Cava settings to make the adaptation (autosens) more responsive


   https://github.com/karlstav/cava/blob/ma...les/config

Adrian.
Reply
Hi Adrian,
 so what you are saying is that the binary install should be all right? the bars will not vary depending on the volume?
Reply
Hi Alain

No, the behaviour will be the same. It is due to the way the audio copy is made, not whether mpd_oled is installed from a package or source. As I understand it, the audio copy does not differentiate between the music getting quieter and the volume being turned down. 

Adrian.
Reply
Hi Adrii,
Ive got mixed up...
What to do after the 7.1.0 update?
The display was ok, but now give a black screen :-(
follow the instructions: https://github.com/antiprism/mpd_oled/bl...L_MOODE.md
and add:
https://github.com/antiprism/mpd_oled/co...1662baa703
what means the following:
https://github.com/antiprism/mpd_oled/issues/65
but when and what is then obsolete in the first instructions???

sorry for my questions but after 47 pages and ''by my never liked github layout'' left me in confusion.....
thanks
har
Reply
Hi har

I am no longer providing a patches for Moode to set up an audio copy using MPD. The 7.0 patch appears to be incompatible with 7.1 and so a different method of creating the audio copy is required for 7.1. This is work in progress, and the github threads are so people can contribute to the solution. The following appears to be working, run the install script here

   https://github.com/antiprism/mpd_oled/is...-803623107

Then run mpd_oled with the extra option '-c alsa,hw:Loopback,1'.

Adrian.
Reply
Hi Adrian,
if I modify main.cpp and display.cpp like last time, what script do I need to run after to show the change?
installed from source 7.
Reply
Hi Alain

If you already installed from the source directory then

Code:
make
sudo make install-strip

Adrian.
Reply


Forum Jump: