Login

**Tim Curtis**

(06-29-2021, 10:09 PM)uteroid Wrote: After the updated, I no longer see the 'Spotify Connected' screen when I go to the web interface and connected to Spotify, I can freely browse the web interface. Though if I try to play a song while Spotify is connected, I get an error "Failed to open "ALSA Default" (alsa); Failed to open ALSA device "_audioout": Device or resource busy". Is this expected behavior?

Thats odd. ETA: You should see the "Spotify Active" overlay screen.

Reboot and then post the Moode startup log and the in-place update log.

Code:
moodeutl -l

cat /var/local/www/update-r721.log

You might also try a hard Browser refresh or clear the Browser cache.

Macdelf · 06-29-2021, 11:41 PM

[attachment=2393 Wrote:Tim Curtis pid='34847' dateline='1625006242']

(06-29-2021, 03:04 PM)Macdelf Wrote:
(06-29-2021, 01:34 PM)Macdelf Wrote: Something amiss with the filter plots. Hopfully just in the plots. I have a symmetric impulse response, which must yield a linear phase shift (delay) in the frequency domain. Plot shows non linear phase. I can attach more info if needed. My impulse responses are in REW (15 lines skipped with camilla)format which do indeed yield the correct frequency response with an inverse
Sorry, resize from ipad is new to me.

I can't see any image.

**Tim Curtis** · 06-30-2021, 01:05 AM

Can you provide the file(s) and steps to repro the issue?

uteroid

(06-29-2021, 10:48 PM)Tim Curtis Wrote:
(06-29-2021, 10:09 PM)uteroid Wrote: After the updated, I no longer see the 'Spotify Connected' screen when I go to the web interface and connected to Spotify, I can freely browse the web interface. Though if I try to play a song while Spotify is connected, I get an error "Failed to open "ALSA Default" (alsa); Failed to open ALSA device "_audioout": Device or resource busy". Is this expected behavior?

Thats odd. ETA: You should see the "Spotify Active" overlay screen.

Reboot and then post the Moode startup log and the in-place update log.

Code:
moodeutl -l cat /var/local/www/update-r721.log

You might also try a hard Browser refresh or clear the Browser cache.

Here ya go!

Code:
pi@moode:~ $ moodeutl -l

20210629 220319 worker: -- Start

20210629 220319 worker: Successfully daemonized

20210629 220320 worker: Integrity check (passed)

20210629 220320 worker: File check (OK)

20210629 220321 worker: Session vacuumed

20210629 220321 worker: Session loaded

20210629 220321 worker: Debug logging (OFF)

20210629 220321 worker: -- Audio debug

20210629 220321 worker: ALSA cards: (0:sndallodigione | 1:empty | 2:empty | 3:empty

20210629 220321 worker: MPD config: (0:Allo DigiOne | mixer:(none) | card:0)

20210629 220321 worker: ALSA mixer actual (none)

20210629 220321 worker: ALSA volume (none)

20210629 220321 worker: -- System

20210629 220322 moode.php: MPD connect failed: cmd=(loadlib)

20210629 220323 moode.php: MPD connect failed: cmd=(lsinfo)

20210629 220325 worker: Host     (moode)

20210629 220325 worker: moOde    (7.3.0 2021-06-25)

20210629 220325 worker: RaspiOS  (10.6)

20210629 220325 worker: Kernel   (5.4.77-v7l+ #1371)

20210629 220325 worker: Platform (Pi-4B 1.2 4GB)

20210629 220325 worker: ARM arch (armv7l, 32-bit kernel)

20210629 220325 worker: MPD ver  (0.22.8_p0x3)

20210629 220325 worker: CPU gov  (ondemand)

20210629 220325 worker: USB boot not available

20210629 220325 worker: File system not expanded yet

20210629 220325 worker: HDMI port on

20210629 220325 worker: -- Network

20210629 220325 worker: eth0 exists

20210629 220325 worker: eth0 wait 0 for IP address

20210629 220328 worker: eth0 wait 1 for IP address

20210629 220352 worker: eth0 wait 2 for IP address

20210629 220355 worker: eth0 wait 3 for IP address

pi@moode:~ $ cat /var/local/www/update-r721.log

20210629 003528 updater: Begin 2021-06-25 update for moOde 7.2.1 2021-05-06

20210629 003528 updater: ** Version check

20210629 003528 updater: ** Step 1-4: Update SQL tables

20210629 003532 updater: ** Step 2-4: Update binaries

20210629 003532 updater: **  Upd 1-4: Install CamillaDSP 0.5.2, GUI 0.7.1, Bckend 0.7.1, Plot 0.5.3

20210629 003620 updater: **  Upd 2-4: Install libcurl3/MPD fix

20210629 003621 updater: **  Upd 3-4: Install librespot 0.2.0

20210629 003621 updater: **  Upd 4-4: Install MPD 0.22.8_p0x3

20210629 003621 updater: ** Step 3-4: Update moOde sources and configs

20210629 003621 updater: ** Step 4-4: Sync changes to disk

20210629 003623 updater: End 2021-06-25 update for moOde 7.2.1 2021-05-06

pi@moode:~ $

Macdelf · 06-30-2021, 02:10 AM

(06-30-2021, 01:05 AM)Tim Curtis Wrote: Can you provide the file(s) and steps to repro the issue?

Code:
---

devices:

  adjust_period: 10

  capture:

    type: File

    channels: 2

    filename: /dev/stdin

    format: S32LE

  capture_samplerate: 0

  chunksize: 4096

  enable_rate_adjust: true

  enable_resampling: false

  playback:

    type: Alsa

    channels: 2

    device: hw:2,0

    format: S32LE

  queuelimit: 32

  resampler_type: BalancedAsync

  samplerate: 192000

  silence_threshold: 0

  silence_timeout: 0

  target_level: 0

filters:

  Lconv:

    parameters:

      filename: ../../../../home/pi/L_impulse_$samplerate$_rew.txt

      format: TEXT

      read_bytes_lines: 0

      skip_bytes_lines: 15

      type: Raw

    type: Conv

  Rconv:

    parameters:

      filename: ../../../../home/pi/R_impulse_$samplerate$_rew.txt

      format: TEXT

      read_bytes_lines: 0

      skip_bytes_lines: 15

      type: Raw

    type: Conv

  gainred:

    parameters:

      gain: -2

      inverted: false

      mute: false

    type: Gain

pipeline:

- channel: 0

  names:

  - gainred

  - Lconv

  type: Filter

- channel: 1

  names:

  - gainred

  - Rconv

  type: Filter

...

The Impulse file is too large but here is the beginning
* Impulse Response data saved by REW V5.20
* IR is not normalised
* IR window has not been applied
* IR is not the min phase version
* Source: Microphone (Umik-1 Gain: 18dB ), MICROPHONE (Master Volume),
* Dated: Jan 25, 2021 11:13:13 AM
* Measurement: speakers set digital out Jan 25
* Excitation: 512k Log Swept Sine, 1 sweep at -12.0 dBFS using an acoust
* Response measured over: 10.0 to 20,000.0 Hz
0.1121257991 // Peak value before normalisation
11024 // Peak index
22051 // Response length
0.0000226757 // Sample interval (seconds)
-0.2500113249 // Start time (seconds)
* Data start
-0.0000033564495
-0.000002893786
-0.0000030472875
-0.0000031913376
-0.0000033453098
-0.0000032243236
-0.0000026446

**Tim Curtis**

(06-30-2021, 02:09 AM)uteroid Wrote:
(06-29-2021, 10:48 PM)Tim Curtis Wrote:
(06-29-2021, 10:09 PM)uteroid Wrote: After the updated, I no longer see the 'Spotify Connected' screen when I go to the web interface and connected to Spotify, I can freely browse the web interface. Though if I try to play a song while Spotify is connected, I get an error "Failed to open "ALSA Default" (alsa); Failed to open ALSA device "_audioout": Device or resource busy". Is this expected behavior?

Thats odd. ETA: You should see the "Spotify Active" overlay screen.

Reboot and then post the Moode startup log and the in-place update log.

Code:
moodeutl -l cat /var/local/www/update-r721.log

You might also try a hard Browser refresh or clear the Browser cache.

Here ya go!

Code:
pi@moode:~ $ moodeutl -l 20210629 220319 worker: -- Start 20210629 220319 worker: Successfully daemonized 20210629 220320 worker: Integrity check (passed) 20210629 220320 worker: File check (OK) 20210629 220321 worker: Session vacuumed 20210629 220321 worker: Session loaded 20210629 220321 worker: Debug logging (OFF) 20210629 220321 worker: -- Audio debug 20210629 220321 worker: ALSA cards: (0:sndallodigione | 1:empty | 2:empty | 3:empty 20210629 220321 worker: MPD config: (0:Allo DigiOne | mixer:(none) | card:0) 20210629 220321 worker: ALSA mixer actual (none) 20210629 220321 worker: ALSA volume (none) 20210629 220321 worker: -- System 20210629 220322 moode.php: MPD connect failed: cmd=(loadlib) 20210629 220323 moode.php: MPD connect failed: cmd=(lsinfo) 20210629 220325 worker: Host (moode) 20210629 220325 worker: moOde (7.3.0 2021-06-25) 20210629 220325 worker: RaspiOS (10.6) 20210629 220325 worker: Kernel (5.4.77-v7l+ #1371) 20210629 220325 worker: Platform (Pi-4B 1.2 4GB) 20210629 220325 worker: ARM arch (armv7l, 32-bit kernel) 20210629 220325 worker: MPD ver (0.22.8_p0x3) 20210629 220325 worker: CPU gov (ondemand) 20210629 220325 worker: USB boot not available 20210629 220325 worker: File system not expanded yet 20210629 220325 worker: HDMI port on 20210629 220325 worker: -- Network 20210629 220325 worker: eth0 exists 20210629 220325 worker: eth0 wait 0 for IP address 20210629 220328 worker: eth0 wait 1 for IP address 20210629 220352 worker: eth0 wait 2 for IP address 20210629 220355 worker: eth0 wait 3 for IP address pi@moode:~ $ cat /var/local/www/update-r721.log 20210629 003528 updater: Begin 2021-06-25 update for moOde 7.2.1 2021-05-06 20210629 003528 updater: ** Version check 20210629 003528 updater: ** Step 1-4: Update SQL tables 20210629 003532 updater: ** Step 2-4: Update binaries 20210629 003532 updater: ** Upd 1-4: Install CamillaDSP 0.5.2, GUI 0.7.1, Bckend 0.7.1, Plot 0.5.3 20210629 003620 updater: ** Upd 2-4: Install libcurl3/MPD fix 20210629 003621 updater: ** Upd 3-4: Install librespot 0.2.0 20210629 003621 updater: ** Upd 4-4: Install MPD 0.22.8_p0x3 20210629 003621 updater: ** Step 3-4: Update moOde sources and configs 20210629 003621 updater: ** Step 4-4: Sync changes to disk 20210629 003623 updater: End 2021-06-25 update for moOde 7.2.1 2021-05-06 pi@moode:~ $

The Moode startup log just abruptly ends at the line below which suggests a broken image. I'd start with a fresh 7.3.0 image from moodeaudio.org.

20210629 220355 worker: eth0 wait 3 for IP address

**Tim Curtis** · 06-30-2021, 02:18 AM

(06-30-2021, 02:10 AM)Macdelf Wrote:
(06-30-2021, 01:05 AM)Tim Curtis Wrote: Can you provide the file(s) and steps to repro the issue?

Code:
--- devices: adjust_period: 10 capture: type: File channels: 2 filename: /dev/stdin format: S32LE capture_samplerate: 0 chunksize: 4096 enable_rate_adjust: true enable_resampling: false playback: type: Alsa channels: 2 device: hw:2,0 format: S32LE queuelimit: 32 resampler_type: BalancedAsync samplerate: 192000 silence_threshold: 0 silence_timeout: 0 target_level: 0 filters: Lconv: parameters: filename: ../../../../home/pi/L_impulse_$samplerate$_rew.txt format: TEXT read_bytes_lines: 0 skip_bytes_lines: 15 type: Raw type: Conv Rconv: parameters: filename: ../../../../home/pi/R_impulse_$samplerate$_rew.txt format: TEXT read_bytes_lines: 0 skip_bytes_lines: 15 type: Raw type: Conv gainred: parameters: gain: -2 inverted: false mute: false type: Gain pipeline: - channel: 0 names: - gainred - Lconv type: Filter - channel: 1 names: - gainred - Rconv type: Filter ...
The Impulse file is too large but here is the beginning
* Impulse Response data saved by REW V5.20
* IR is not normalised
* IR window has not been applied
* IR is not the min phase version
* Source: Microphone (Umik-1 Gain: 18dB ), MICROPHONE (Master Volume),
* Dated: Jan 25, 2021 11:13:13 AM
* Measurement: speakers set digital out Jan 25
* Excitation: 512k Log Swept Sine, 1 sweep at -12.0 dBFS using an acoust
* Response measured over: 10.0 to 20,000.0 Hz
0.1121257991 // Peak value before normalisation
11024 // Peak index
22051 // Response length
0.0000226757 // Sample interval (seconds)
-0.2500113249 // Start time (seconds)
* Data start
-0.0000033564495
-0.000002893786
-0.0000030472875
-0.0000031913376
-0.0000033453098
-0.0000032243236
-0.0000026446

Just PM a download link to the file to me and to @bitlab

Macdelf · 06-30-2021, 02:21 AM

(06-30-2021, 02:10 AM)Macdelf Wrote:
(06-30-2021, 01:05 AM)Tim Curtis Wrote: Can you provide the file(s) and steps to repro the issue?

Code:
--- devices: adjust_period: 10 capture: type: File channels: 2 filename: /dev/stdin format: S32LE capture_samplerate: 0 chunksize: 4096 enable_rate_adjust: true enable_resampling: false playback: type: Alsa channels: 2 device: hw:2,0 format: S32LE queuelimit: 32 resampler_type: BalancedAsync samplerate: 192000 silence_threshold: 0 silence_timeout: 0 target_level: 0 filters: Lconv: parameters: filename: ../../../../home/pi/L_impulse_$samplerate$_rew.txt format: TEXT read_bytes_lines: 0 skip_bytes_lines: 15 type: Raw type: Conv Rconv: parameters: filename: ../../../../home/pi/R_impulse_$samplerate$_rew.txt format: TEXT read_bytes_lines: 0 skip_bytes_lines: 15 type: Raw type: Conv gainred: parameters: gain: -2 inverted: false mute: false type: Gain pipeline: - channel: 0 names: - gainred - Lconv type: Filter - channel: 1 names: - gainred - Rconv type: Filter ...
The Impulse file is too large but here is the beginning
* Impulse Response data saved by REW V5.20
* IR is not normalised
* IR window has not been applied
* IR is not the min phase version
* Source: Microphone (Umik-1 Gain: 18dB ), MICROPHONE (Master Volume),
* Dated: Jan 25, 2021 11:13:13 AM
* Measurement: speakers set digital out Jan 25
* Excitation: 512k Log Swept Sine, 1 sweep at -12.0 dBFS using an acoust
* Response measured over: 10.0 to 20,000.0 Hz
0.1121257991 // Peak value before normalisation
11024 // Peak index
22051 // Response length
0.0000226757 // Sample interval (seconds)
-0.2500113249 // Start time (seconds)
* Data start
-0.0000033564495
-0.000002893786
-0.0000030472875
-0.0000031913376
-0.0000033453098
-0.0000032243236
-0.0000026446

Is there a way to send very large files? I cannot seem to attach the .txt impulse file. BTW the REW header is not used it is there just so I can debug in REW. I geneated the function by measuring with REW and my own Fourier transform. When I run this it dous seem to give the correcet amplitude results with a frequency sweep. It is a symettric impulse response and should have linear phase. REW says it does too. The phase plot from the moode pipeline editor bugs me and must be wrong.

CallMeMike · 06-30-2021, 05:58 AM

(06-29-2021, 01:13 PM)Mr.R0b0t Wrote:
(06-29-2021, 09:44 AM)DRONE7 Wrote:
(06-29-2021, 09:01 AM)Mr.R0b0t Wrote:
(06-29-2021, 06:59 AM)the_bertrum Wrote:
(06-28-2021, 05:37 PM)Mr.R0b0t Wrote: the track progress bar sometimes flashes,
the volume bar sometimes flashes

What devices do you see this on?

laptop - firefox 90
Firefox 90 is a Beta release.....
Does the behaviour you see happen with the stable Firefox 89 release ??

it didn't happen in moode 7.2, it happened right after the upgrade moode

This sounds 'defensive' rather than 'constructive'...

Here are Mozilla's notes about their Firefox Beta versions ( https://www.mozilla.org/en-GB/firefox/ch...ktop/#beta ):
[url=https://www.mozilla.org/en-GB/firefox/channel/desktop/#beta][/url]
<< Beta is an unstable testing and development platform. By default, Beta sends data to Mozilla — and sometimes our partners — to help us handle problems and try ideas. >>

Mr.R0b0t · 06-30-2021, 09:41 AM

(06-30-2021, 05:58 AM)CallMeMike Wrote:
(06-29-2021, 01:13 PM)Mr.R0b0t Wrote:
(06-29-2021, 09:44 AM)DRONE7 Wrote:
(06-29-2021, 09:01 AM)Mr.R0b0t Wrote:
(06-29-2021, 06:59 AM)the_bertrum Wrote: What devices do you see this on?

laptop - firefox 90
Firefox 90 is a Beta release.....
Does the behaviour you see happen with the stable Firefox 89 release ??

it didn't happen in moode 7.2, it happened right after the upgrade moode

This sounds 'defensive' rather than 'constructive'...

Here are Mozilla's notes about their Firefox Beta versions ( https://www.mozilla.org/en-GB/firefox/ch...ktop/#beta ):
[url=https://www.mozilla.org/en-GB/firefox/channel/desktop/#beta][/url]
<< Beta is an unstable testing and development platform. By default, Beta sends data to Mozilla — and sometimes our partners — to help us handle problems and try ideas. >>

I have automatic updates turned off, stable 90 will be soon so I will test it and we'll see what happens.

Login
Username:
Password:	Lost Password?
	Remember me