Thank you for your donation!


Cloudsmith graciously provides open-source package management and distribution for our project.


PeppyMeter and moOde
HI
I'm currently stuck at the "Loopback" configuration. Songs cant be play when i set the loopback "on" and showing MPD error.
I think the core system was changed due to the new version?
is there any peppymeter installation update for the latest version of moode?
thanks
K
Reply
(03-30-2022, 02:01 PM)karas Wrote: HI
I'm currently stuck at the "Loopback" configuration. Songs cant be play when i set the loopback "on" and showing MPD error.
I think the core system was changed due to the new version?
is there any peppymeter installation update for the latest version of moode?
thanks
K

Hello Karas,
I haven't test it yet.
I will probably try dyring the weekend and, of course, I will inform about that.
Best regards and thanks,
Francesco
Reply
(03-30-2022, 10:34 PM)fdealexa Wrote:
(03-30-2022, 02:01 PM)karas Wrote: HI
I'm currently stuck at the "Loopback" configuration. Songs cant be play when i set the loopback "on" and showing MPD error.
I think the core system was changed due to the new version?
is there any peppymeter installation update for the latest version of moode?
thanks
K

Hello Karas,
I haven't test it yet.
I will probably try dyring the weekend and, of course, I will inform about that.
Best regards and thanks,
Francesco

Hi Karas,
would you please try the follow commands for the point 1 (instead of that reported on the github Installation and configuration of PeppyAlsa) , follow the point 2 ... and let me know?


Code:
sudo apt-get install git
git clone https://github.com/project-owner/peppyalsa.git
cd peppyalsa
sudo apt-get install libasound2-dev libfftw3-dev
aclocal && libtoolize
autoconf && automake --add-missing
./configure && make
sudo make install

I have tested it on a scratch 8.0.2 installation with a raspberry hat as DAC.
Good luck and best regards,
Francesco
Reply
(04-03-2022, 08:09 AM)fdealexa Wrote:
(03-30-2022, 10:34 PM)fdealexa Wrote:
(03-30-2022, 02:01 PM)karas Wrote: HI
I'm currently stuck at the "Loopback" configuration. Songs cant be play when i set the loopback "on" and showing MPD error.
I think the core system was changed due to the new version?
is there any peppymeter installation update for the latest version of moode?
thanks
K

Hello Karas,
I haven't test it yet.
I will probably try dyring the weekend and, of course, I will inform about that.
Best regards and thanks,
Francesco

Hi Karas,
would you please try the follow commands for the point 1 (instead of that reported on the github Installation and configuration of PeppyAlsa) , follow the point 2 ... and let me know?


Code:
sudo apt-get install git
git clone https://github.com/project-owner/peppyalsa.git
cd peppyalsa
sudo apt-get install libasound2-dev libfftw3-dev
aclocal && libtoolize
autoconf && automake --add-missing
./configure && make
sudo make install

I have tested it on a scratch 8.0.2 installation with a raspberry hat as DAC.
Good luck and best regards,
Francesco

Hi Francesco,
Thanks for the update. I tried your commands and got "openMpdsock ()Failed" message.
Am I make mistake with the step 2 for moode 7.2? since new version doesn't work with it?
https://github.com/FdeAlexa/PeppyMeter_a...oOde720.md
Reply
Hi Karas,
To try to help you, I need to replicate your environment. Would you please describe your configuration and send the output of the following command:
moodeutl -l
Thanks,
Francesco
P.S. 7.2 is ok
Reply
Hi,
is it work with LCD 1920X480 resolution?
Reply
(07-23-2022, 05:47 AM)lhkp0480 Wrote: Hi,
is it work with LCD 1920X480 resolution?

Hello ... (I don't know your name),
as reported on the official documentation "PeppyMeter wiki"
-UI is available in four resolutions 1280x400, 800x480, 480x320 and 320x240 pixels.
Best regards,
Francesco
Reply
Hello everybody
this is the Video of the current situation of my experiments (moOde, PeppyMeter and more).
Any comments, suggestions and criticisms will be appreciated.
Greetings and thanks,
Francesco
Reply
Hi Francesco,
Thank you for your reply.
I go to this step, it's look good:
   

and when go to this step:

"pi@moode:~/PeppyMeter $ cd /home/pi/PeppyMeter
pi@moode:~/PeppyMeter $ sudo python3 peppymeter.py > /dev/fb0"

and get an error :

"Traceback (most recent call last):
 File "peppymeter.py", line 290, in <module>
   pm.init_display()
 File "peppymeter.py", line 150, in init_display
   pygame.display.init()
pygame.error: Unable to open mouse"

Do you have any ide to fix?
Reply
(07-25-2022, 12:37 PM)lhkp0480 Wrote: Hi Francesco,
Thank you for your reply.
I go to this step, it's look good:


and when go to this step:

"pi@moode:~/PeppyMeter $ cd /home/pi/PeppyMeter
pi@moode:~/PeppyMeter $ sudo python3 peppymeter.py > /dev/fb0"

and get an error :

"Traceback (most recent call last):
 File "peppymeter.py", line 290, in <module>
   pm.init_display()
 File "peppymeter.py", line 150, in init_display
   pygame.display.init()
pygame.error: Unable to open mouse"

Do you have any ide to fix?

It looks like you do not have changed the "mouse.device" in the "config.txt" that should be "mouse.device = /dev/input/event0".
Let's try to see the results of the following commands:

Code:
cat /home/pi/PeppyMeter/config.txt

and
Code:
ls -lia /dev/input/*

Best regards,
Francesco
Reply


Forum Jump: