Login

CarlCarl · 10-07-2018, 08:42 AM

Hi,

when generating album cover thumbnail cash, the process stopped after 293 albums. The remaining 900 or so albums are not processed. It stops at the first album of the artist it currently processes. I deleted the artist where it stopped and restarted the process. It managed to process until album 308 and stopped there.

Obviously most albums show no cover art in the UI.

I cleared library cash, re generated album cover thumbnail with no avail. The album cover generator stops at the same location each time.

I am using Moose 4.3.
Music is organized in Artist Album structure.
The music library is sitting on a NAS and files are mp3.
Each album folder contains a jpg with the cover art e.g "Bruce Springsteen - Born In The U.S.A..jpg"
Most mp3 have also embedded cover art but not all.
Playing music from the library works great with moode!. The only issue are the missing covers.

thanks for any hint how to fix this

rikardo1979 · (This post was last modified: 10-07-2018, 08:56 AM by rikardo1979.)

Before the devs reply here with some clever info I do my little bit Smile

I always name the cover file folder.jpg in each folder and is always 100% displayed correctly

CallMeMike · 10-07-2018, 10:11 AM

(10-07-2018, 08:56 AM)rikardo1979 Wrote: Before the devs reply here with some clever info I do my little bit

I always name the cover file folder.jpg in each folder and is always 100% displayed correctly

.. or cover.jpg

**Tim Curtis** · 10-07-2018, 03:02 PM

(10-07-2018, 08:42 AM)CarlCarl Wrote: Hi,

when generating album cover thumbnail cash, the process stopped after 293 albums. The remaining 900 or so albums are not processed. It stops at the first album of the artist it currently processes. I deleted the artist where it stopped and restarted the process. It managed to process until album 308 and stopped there.

Obviously most albums show no cover art in the UI.

I cleared library cash, re generated album cover thumbnail with no avail. The album cover generator stops at the same location each time.

I am using Moose 4.3.
Music is organized in Artist Album structure.
The music library is sitting on a NAS and files are mp3.
Each album folder contains a jpg with the cover art e.g "Bruce Springsteen - Born In The U.S.A..jpg"
Most mp3 have also embedded cover art but not all.
Playing music from the library works great with moode!. The only issue are the missing covers.

thanks for any hint how to fix this

Any errors in moode.log?

CarlCarl

Hi Tim

thx for coming answering so fast. Highly appreciated.

Renaming the jpgs to folder.jpg did not solve the issue.

moode.log is as follows

Code:
pi@moode:~ $ cat /var/log/moode.log 

20181007 100853 worker: - Start

20181007 100853 worker: Successfully daemonized

20181007 100854 worker: Session loaded

20181007 100854 worker: Debug logging (off)

20181007 100854 worker: - Platform

20181007 100855 worker: Host (moode)

20181007 100855 worker: Hdwr (Pi-3B 1GB v1.2)

20181007 100855 worker: Arch (armv7l)

20181007 100855 worker: Rasp (9.4)

20181007 100855 worker: Kver (4.14.72-v7+)

20181007 100855 worker: Ktyp (Standard)

20181007 100855 worker: Gov  (performance)

20181007 100855 worker: Rel  (Moode 4.3 2018-09-27)

20181007 100855 worker: Upd  (None)

20181007 100855 worker: MPD  (0.20.20)

20181007 100855 worker: USB boot not enabled yet

20181007 100855 worker: File system expanded

20181007 100855 worker: HDMI port off

20181007 100856 worker: File check ok

20181007 100856 worker: - Network

20181007 100856 worker: eth0 exists

20181007 100856 worker: eth0 wait 0 for IP address

20181007 100859 worker: eth0 (192.168.1.102)

20181007 100859 worker: wlan0 exists

20181007 100859 worker: wifi country (CH)

20181007 100859 worker: wlan0 trying SSID (wanlins)

20181007 100859 worker: wlan0 (192.168.1.27)

20181007 100859 worker: - Audio

20181007 100859 worker: ALSA outputs unmuted

20181007 100859 worker: ALSA card number (0)

20181007 100859 worker: Audio out (I2S audio device)

20181007 100859 worker: Audio dev (HiFiBerry DAC+ Pro)

20181007 100859 worker: ALSA mixer name (Digital)

20181007 100859 worker: MPD volume control (software)

20181007 100859 worker: Hdwr volume controller exists

20181007 100859 worker: Chip options (Burr Brown PCM5122)

20181007 100859 worker: - Services

20181007 100859 worker: Reset renderer active

20181007 100900 src-config: Connection to MPD failed

20181007 100902 worker: MPD started

20181007 100902 worker: MPD scheduler policy (time-share)

20181007 100902 worker: Configure MPD outputs

20181007 100902 worker: MPD output 1 ALSA default (on)

20181007 100902 worker: MPD output 2 ALSA crossfeed (off)

20181007 100902 worker: MPD output 3 ALSA parametric eq (off)

20181007 100902 worker: MPD output 4 ALSA graphic eq (off)

20181007 100902 worker: MPD output 5 ALSA bluetooth (off)

20181007 100902 worker: MPD crossfade (off)

20181007 100902 worker: Airplay receiver started

20181007 100902 worker: Airplay volume mgt (auto)

20181007 100902 worker: UPnP renderer started

20181007 100902 worker: DLNA server started

20181007 100902 worker: - Music sources

20181007 100902 worker: USB sources (none attached)

20181007 100903 worker: NAS sources (mountall initiated)

20181007 100903 worker: - Miscellaneous

20181007 100903 worker: Volume level (34) restored

20181007 100903 worker: Maintenance interval (21600)

20181007 100903 worker: Screen saver activation (Never)

20181007 100903 worker: Watchdog started

20181007 100903 worker: Ready

20181007 101129 worker: Job regenthmcache

20181007 101130 thmcache: Start

20181007 101639 worker: Job regenthmcache

20181007 101640 thmcache: Start

20181007 145704 worker: Job regenthmcache

20181007 145705 thmcache: Start

20181007 145941 worker: Job regenthmcache

20181007 145941 thmcache: Start

20181007 150315 worker: Job regenthmcache

20181007 150315 thmcache: Start

20181007 151932 worker: Job regenthmcache

20181007 151933 thmcache: Start

20181007 152009 worker: Job rescanmpddb

20181007 161154 worker: Maintenance completed

20181007 170652 worker: Job regenthmcache

20181007 170652 thmcache: Start

20181007 183125 worker: Job rescanmpddb

20181007 185144 worker: Job regenthmcache

20181007 185144 thmcache: Start

20181007 192222 worker: Job regenthmcache

20181007 192222 thmcache: Start

20181007 192304 worker: Job updthmcache

20181007 192305 thmcache: Start

20181007 192338 worker: Job regenthmcache

20181007 192338 thmcache: Start

CarlCarl · 10-07-2018, 05:33 PM

(10-07-2018, 08:56 AM)rikardo1979 Wrote: Before the devs reply here with some clever info I do my little bit

I always name the cover file folder.jpg in each folder and is always 100% displayed correctly

thx for the proposal. Did not fix the issue jet.

**Tim Curtis** · (This post was last modified: 10-07-2018, 06:34 PM by Tim Curtis.)

(10-07-2018, 05:32 PM)CarlCarl Wrote: Hi Tim

thx for coming answering so fast. Highly appreciated.

Renaming the jpgs to folder.jpg did not solve the issue.

moode.log is as follows

Code:
pi@moode:~ $ cat /var/log/moode.log 20181007 100853 worker: - Start 20181007 100853 worker: Successfully daemonized 20181007 100854 worker: Session loaded 20181007 100854 worker: Debug logging (off) 20181007 100854 worker: - Platform 20181007 100855 worker: Host (moode) 20181007 100855 worker: Hdwr (Pi-3B 1GB v1.2) 20181007 100855 worker: Arch (armv7l) 20181007 100855 worker: Rasp (9.4) 20181007 100855 worker: Kver (4.14.72-v7+) 20181007 100855 worker: Ktyp (Standard) 20181007 100855 worker: Gov (performance) 20181007 100855 worker: Rel (Moode 4.3 2018-09-27) 20181007 100855 worker: Upd (None) 20181007 100855 worker: MPD (0.20.20) 20181007 100855 worker: USB boot not enabled yet 20181007 100855 worker: File system expanded 20181007 100855 worker: HDMI port off 20181007 100856 worker: File check ok 20181007 100856 worker: - Network 20181007 100856 worker: eth0 exists 20181007 100856 worker: eth0 wait 0 for IP address 20181007 100859 worker: eth0 (192.168.1.102) 20181007 100859 worker: wlan0 exists 20181007 100859 worker: wifi country (CH) 20181007 100859 worker: wlan0 trying SSID (wanlins) 20181007 100859 worker: wlan0 (192.168.1.27) 20181007 100859 worker: - Audio 20181007 100859 worker: ALSA outputs unmuted 20181007 100859 worker: ALSA card number (0) 20181007 100859 worker: Audio out (I2S audio device) 20181007 100859 worker: Audio dev (HiFiBerry DAC+ Pro) 20181007 100859 worker: ALSA mixer name (Digital) 20181007 100859 worker: MPD volume control (software) 20181007 100859 worker: Hdwr volume controller exists 20181007 100859 worker: Chip options (Burr Brown PCM5122) 20181007 100859 worker: - Services 20181007 100859 worker: Reset renderer active 20181007 100900 src-config: Connection to MPD failed 20181007 100902 worker: MPD started 20181007 100902 worker: MPD scheduler policy (time-share) 20181007 100902 worker: Configure MPD outputs 20181007 100902 worker: MPD output 1 ALSA default (on) 20181007 100902 worker: MPD output 2 ALSA crossfeed (off) 20181007 100902 worker: MPD output 3 ALSA parametric eq (off) 20181007 100902 worker: MPD output 4 ALSA graphic eq (off) 20181007 100902 worker: MPD output 5 ALSA bluetooth (off) 20181007 100902 worker: MPD crossfade (off) 20181007 100902 worker: Airplay receiver started 20181007 100902 worker: Airplay volume mgt (auto) 20181007 100902 worker: UPnP renderer started 20181007 100902 worker: DLNA server started 20181007 100902 worker: - Music sources 20181007 100902 worker: USB sources (none attached) 20181007 100903 worker: NAS sources (mountall initiated) 20181007 100903 worker: - Miscellaneous 20181007 100903 worker: Volume level (34) restored 20181007 100903 worker: Maintenance interval (21600) 20181007 100903 worker: Screen saver activation (Never) 20181007 100903 worker: Watchdog started 20181007 100903 worker: Ready 20181007 101129 worker: Job regenthmcache 20181007 101130 thmcache: Start 20181007 101639 worker: Job regenthmcache 20181007 101640 thmcache: Start 20181007 145704 worker: Job regenthmcache 20181007 145705 thmcache: Start 20181007 145941 worker: Job regenthmcache 20181007 145941 thmcache: Start 20181007 150315 worker: Job regenthmcache 20181007 150315 thmcache: Start 20181007 151932 worker: Job regenthmcache 20181007 151933 thmcache: Start 20181007 152009 worker: Job rescanmpddb 20181007 161154 worker: Maintenance completed 20181007 170652 worker: Job regenthmcache 20181007 170652 thmcache: Start 20181007 183125 worker: Job rescanmpddb 20181007 185144 worker: Job regenthmcache 20181007 185144 thmcache: Start 20181007 192222 worker: Job regenthmcache 20181007 192222 thmcache: Start 20181007 192304 worker: Job updthmcache 20181007 192305 thmcache: Start 20181007 192338 worker: Job regenthmcache 20181007 192338 thmcache: Start

The log output does not show the completion message for thmcache.php nor does it show any errors. This suggests that it has crashed for some reason.

The completion message would appear as below in the log.

Code:
thmcache: Done: 1531 album dirs processed

Maybe there is a corrupt directory, song file or image.

I would try examining the directory, files and image that would have been processed next after the last album name listed in the VIEW status line.

-Tim

**Tim Curtis** · (This post was last modified: 10-07-2018, 06:59 PM by Tim Curtis.)

The other potential issue I noticed is that u are using a Hifiberry DAC+Pro and WiFi. The 1st gen DAC+Pro has a hardware defect which results in interference in the WiFi 2.4G band. It can cause unstable WiFi connection.

**Tim Curtis** · 10-08-2018, 04:44 PM

Also check free space on the SDCard to rule out "out of free space" condition.

df -h

CarlCarl · 10-09-2018, 08:38 PM

(10-07-2018, 06:34 PM)Tim Curtis Wrote:
(10-07-2018, 05:32 PM)CarlCarl Wrote: Hi Tim

thx for coming answering so fast. Highly appreciated.

Renaming the jpgs to folder.jpg did not solve the issue.

moode.log is as follows

Code:
pi@moode:~ $ cat /var/log/moode.log 20181007 100853 worker: - Start 20181007 100853 worker: Successfully daemonized 20181007 100854 worker: Session loaded 20181007 100854 worker: Debug logging (off) 20181007 100854 worker: - Platform 20181007 100855 worker: Host (moode) 20181007 100855 worker: Hdwr (Pi-3B 1GB v1.2) 20181007 100855 worker: Arch (armv7l) 20181007 100855 worker: Rasp (9.4) 20181007 100855 worker: Kver (4.14.72-v7+) 20181007 100855 worker: Ktyp (Standard) 20181007 100855 worker: Gov (performance) 20181007 100855 worker: Rel (Moode 4.3 2018-09-27) 20181007 100855 worker: Upd (None) 20181007 100855 worker: MPD (0.20.20) 20181007 100855 worker: USB boot not enabled yet 20181007 100855 worker: File system expanded 20181007 100855 worker: HDMI port off 20181007 100856 worker: File check ok 20181007 100856 worker: - Network 20181007 100856 worker: eth0 exists 20181007 100856 worker: eth0 wait 0 for IP address 20181007 100859 worker: eth0 (192.168.1.102) 20181007 100859 worker: wlan0 exists 20181007 100859 worker: wifi country (CH) 20181007 100859 worker: wlan0 trying SSID (wanlins) 20181007 100859 worker: wlan0 (192.168.1.27) 20181007 100859 worker: - Audio 20181007 100859 worker: ALSA outputs unmuted 20181007 100859 worker: ALSA card number (0) 20181007 100859 worker: Audio out (I2S audio device) 20181007 100859 worker: Audio dev (HiFiBerry DAC+ Pro) 20181007 100859 worker: ALSA mixer name (Digital) 20181007 100859 worker: MPD volume control (software) 20181007 100859 worker: Hdwr volume controller exists 20181007 100859 worker: Chip options (Burr Brown PCM5122) 20181007 100859 worker: - Services 20181007 100859 worker: Reset renderer active 20181007 100900 src-config: Connection to MPD failed 20181007 100902 worker: MPD started 20181007 100902 worker: MPD scheduler policy (time-share) 20181007 100902 worker: Configure MPD outputs 20181007 100902 worker: MPD output 1 ALSA default (on) 20181007 100902 worker: MPD output 2 ALSA crossfeed (off) 20181007 100902 worker: MPD output 3 ALSA parametric eq (off) 20181007 100902 worker: MPD output 4 ALSA graphic eq (off) 20181007 100902 worker: MPD output 5 ALSA bluetooth (off) 20181007 100902 worker: MPD crossfade (off) 20181007 100902 worker: Airplay receiver started 20181007 100902 worker: Airplay volume mgt (auto) 20181007 100902 worker: UPnP renderer started 20181007 100902 worker: DLNA server started 20181007 100902 worker: - Music sources 20181007 100902 worker: USB sources (none attached) 20181007 100903 worker: NAS sources (mountall initiated) 20181007 100903 worker: - Miscellaneous 20181007 100903 worker: Volume level (34) restored 20181007 100903 worker: Maintenance interval (21600) 20181007 100903 worker: Screen saver activation (Never) 20181007 100903 worker: Watchdog started 20181007 100903 worker: Ready 20181007 101129 worker: Job regenthmcache 20181007 101130 thmcache: Start 20181007 101639 worker: Job regenthmcache 20181007 101640 thmcache: Start 20181007 145704 worker: Job regenthmcache 20181007 145705 thmcache: Start 20181007 145941 worker: Job regenthmcache 20181007 145941 thmcache: Start 20181007 150315 worker: Job regenthmcache 20181007 150315 thmcache: Start 20181007 151932 worker: Job regenthmcache 20181007 151933 thmcache: Start 20181007 152009 worker: Job rescanmpddb 20181007 161154 worker: Maintenance completed 20181007 170652 worker: Job regenthmcache 20181007 170652 thmcache: Start 20181007 183125 worker: Job rescanmpddb 20181007 185144 worker: Job regenthmcache 20181007 185144 thmcache: Start 20181007 192222 worker: Job regenthmcache 20181007 192222 thmcache: Start 20181007 192304 worker: Job updthmcache 20181007 192305 thmcache: Start 20181007 192338 worker: Job regenthmcache 20181007 192338 thmcache: Start

The log output does not show the completion message for thmcache.php nor does it show any errors. This suggests that it has crashed for some reason.

The completion message would appear as below in the log.

Code:
thmcache: Done: 1531 album dirs processed

Maybe there is a corrupt directory, song file or image.

I would try examining the directory, files and image that would have been processed next after the last album name listed in the VIEW status line.

-Tim

Hi Tim,
I did delete the files where the indexing stopped and now it is working great. Thanks a lot for your support

Login
Username:
Password:	Lost Password?
	Remember me