moodeaudio.org > Moode Forum › moOde audio player › Support v
Moode 8.2..xx - i can't mount NAS

Thank you for your donation!


Cloudsmith graciously provides open-source package management and distribution for our project.


Thread Modes
Moode 8.2..xx - i can't mount NAS
grandfunk69 Offline
Junior Member
*
Posts: 9
Threads: 3
Joined: Oct 2022
Reputation: 0
#1
10-28-2022, 09:57 PM
Since the following option was implemented in versions 8.2.xx: - UPD: Add 'noserverino' to SMB default mount options, it gives me an error when mounting my NAS (red cross). I have manually removed the 'noserverino' option and it still gives an error. I have a WD MyCloud Ex2 Ultra NAS.
I have tested all 8.2.xx versions released to date.
 
I had to go back to version 8.1.xx
Any solution? Thanks in advance
Find
Reply
Tim Curtis Online
moOde audio founder
******
Posts: 13,414
Threads: 304
Joined: Mar 2018
Reputation: 543
#2
10-28-2022, 11:49 PM
Turn on debug logging in System config, reboot and then post the startup log.

Code:
moodeutl -l
Enjoy the Music!
moodeaudio.org | Mastodon Feed | GitHub
Website Find
Reply
grandfunk69 Offline
Junior Member
*
Posts: 9
Threads: 3
Joined: Oct 2022
Reputation: 0
#3
10-29-2022, 06:20 AM
Thanks

20221029 021606 worker: --
20221029 021606 worker: -- Start moOde 8 series
20221029 021606 worker: --
20221029 021606 worker: Successfully daemonized
20221029 021608 worker: File check (OK)
20221029 021608 worker: Session vacuumed
20221029 021608 worker: Session loaded
20221029 021608 worker: Debug logging (ON)
20221029 021608 worker: --
20221029 021608 worker: -- Audio debug
20221029 021608 worker: --
20221029 021608 worker: ALSA cards: (0:b1 | 1:Headphones | 2Big Grinigital | 3:empty
20221029 021608 worker: MPD config: (2Tonguere Box S2 Digital | mixerSadPre Box S2 Digital ) | card:2)
20221029 021608 worker: ALSA mixer actual (Pre Box S2 Digital )
20221029 021609 worker: ALSA Pre Box S2 Digital volume set to (0%)
20221029 021609 worker: --
20221029 021609 worker: -- System
20221029 021609 worker: --
20221029 021610 worker: Host (moode)
20221029 021610 worker: moOde (8.2.2 2022-10-23)
20221029 021610 worker: RaspiOS (11.5)
20221029 021610 worker: Kernel (5.15.61-v7l+ #1579)
20221029 021610 worker: Platform (Pi-4B 1.4 8GB)
20221029 021610 worker: ARM arch (armv7l, 32-bit)
20221029 021610 worker: MPD ver (0.23.5)
20221029 021610 worker: CPU gov (ondemand)
20221029 021610 worker: USB boot (enabled)
20221029 021610 worker: File sys (expanded)
20221029 021610 worker: HDMI port (On)
20221029 021610 worker: Sys LED0 (On)
20221029 021610 worker: Sys LED1 (On)
20221029 021610 worker: --
20221029 021610 worker: -- Network
20221029 021610 worker: --
20221029 021610 worker: eth0 adapter exists
20221029 021610 worker: eth0 check for address (No)
20221029 021610 worker: eth0 address not assigned
20221029 021610 worker: wlan0 adapter exists
20221029 021610 worker: wlan0 country (US)
20221029 021610 worker: wlan0 SSID is "None (activates AP mode)"
20221029 021610 worker: wlan0 AP mode started
20221029 021619 worker: wlan0 check 0 for IP address
20221029 021621 worker: wlan0 check 1 for IP address
20221029 021623 worker: wlan0 check 2 for IP address
20221029 021625 worker: IP addr (172.24.1.1)
20221029 021625 worker: Netmask (255.255.255.0)
20221029 021625 worker: Gateway (192.168.1.1)
20221029 021625 worker: Pri DNS (127.0.0.1)
20221029 021625 worker: Domain (home)
20221029 021625 worker: wlan0 power save disabled
20221029 021625 worker: apd0 router mode (Off)
20221029 021625 worker: --
20221029 021625 worker: -- Software update
20221029 021625 worker: --
20221029 021625 worker: Automatic check (Off)
20221029 021625 worker: --
20221029 021625 worker: -- Audio config
20221029 021625 worker: --
20221029 021625 worker: MPD conf update skipped (USB device)
20221029 021625 worker: ALSA card number (2)
20221029 021625 worker: MPD audio output (Pre Box S2 Digital)
20221029 021625 worker: Audio formats (S32_LE, SPECIAL, DSD_U32_BE)
20221029 021625 worker: ALSA mixer name (Pre Box S2 Digital )
20221029 021625 worker: MPD mixer type (software)
20221029 021625 worker: Hdwr volume controller exists
20221029 021625 worker: Max ALSA volume (100%)
20221029 021625 worker: ALSA output mode (Default: plughw)
20221029 021625 worker: ALSA loopback (Off)
20221029 021625 worker: Reset renderer active flags
20221029 021626 worker: CamillaDSP (off)
20221029 021626 worker: --
20221029 021626 worker: -- File sharing
20221029 021626 worker: --
20221029 021627 worker: SMB file sharing (On)
20221029 021627 worker: NFS file sharing (On)
20221029 021627 worker: --
20221029 021627 worker: -- MPD startup
20221029 021627 worker: --
20221029 021628 worker: MPD started
20221029 021628 worker: MPD accepting connections
20221029 021628 worker: MPD output 1 ALSA Default (On)
20221029 021628 worker: MPD output 2 ALSA Bluetooth (Off)
20221029 021628 worker: MPD output 3 HTTP Server (Off)
20221029 021628 worker: MPD crossfade (off)
20221029 021628 worker: MPD ignore CUE files (yes)
20221029 021628 worker: --
20221029 021628 worker: -- Music sources
20221029 021628 worker: --
20221029 021628 worker: USB sources
20221029 021628 worker: No drives found
20221029 021628 worker: NAS sources
20221029 021628 worker: nuevo
20221029 021629 worker: Try (mount -t cifs "//MYCLOUDEX2ULTRA/Public" -o username="admin",password="Argot22&",rsize=61440,wsize=65536,iocharset=utf8,ro,noserverino,dir_mode=0777,file_mode=0777 "/mnt/NAS/nuevo")
20221029 021629 worker: Err (mount error: could not resolve address for MYCLOUDEX2ULTRA: Unknown error)
20221029 021629 worker: Mount all submitted
20221029 021629 worker: --
20221029 021629 worker: -- Feature availability
20221029 021629 worker: --
20221029 021629 worker: Source select (available)
20221029 021629 worker: Source select (source: MPD)
20221029 021629 worker: Source select (output: Pre Box S2 Digital)
20221029 021629 worker: Bluetooth (available)
20221029 021629 worker: AirPlay renderer (available)
20221029 021629 worker: Spotify renderer (available)
20221029 021629 worker: Squeezelite (available)
20221029 021629 worker: RoonBridge renderer (not installed)
20221029 021629 worker: Multiroom sender (available)
20221029 021629 worker: Multiroom receiver (available)
20221029 021629 worker: UPnP renderer (available)
20221029 021629 worker: DLNA server (available)
20221029 021629 worker: GPIO button handler (available)
20221029 021629 worker: Stream recorder (n/a)
20221029 021629 worker: --
20221029 021629 worker: -- Other
20221029 021629 worker: --
20221029 021629 worker: USB volume knob (Off)
20221029 021629 worker: USB auto-mounter (udisks-glue)
20221029 021629 worker: Saved MPD vol level (0)
20221029 021629 worker: Preamp volume level (0)
20221029 021629 worker: MPD volume level (100) restored
20221029 021630 worker: ALSA Pre Box S2 Digital volume (100%)
20221029 021630 worker: Auto-play (Off)
20221029 021630 worker: CoverView toggle (-off)
20221029 021630 worker: On-screen keyboard (Off)
20221029 021630 worker: Library scope (all)
20221029 021630 worker: Maintenance interval (360 minutes)
20221029 021630 worker: Screen saver activation (Never)
20221029 021630 worker: Session permissions (OK)
20221029 021630 worker: Mount monitor (Off)
20221029 021630 worker: Watchdog started
20221029 021630 worker: Ready
20221029 021709 waitWorker(): Start (sys-config, w_active=0)
20221029 021709 waitWorker(): End (sys-config, w_active=0)
20221029 021809 waitWorker(): Start (lib-config, w_active=0)
20221029 021809 waitWorker(): End (lib-config, w_active=0)
20221029 021812 waitWorker(): Start (lib-config, w_active=0)
20221029 021812 waitWorker(): End (lib-config, w_active=0)
Find
Reply
TheOldPresbyope Online
Moderator
****
Posts: 6,021
Threads: 176
Joined: Apr 2018
Reputation: 235
#4
10-29-2022, 11:20 AM
@grandfunk69

The log says the moOde player is running standalone in WiFi AP mode. With no connection to the LAN, there is no path to the NAS.

Code:
20221029 021610 worker: eth0 address not assigned
...
20221029 021610 worker: wlan0 AP mode started
...
20221029 021625 worker: IP addr (172.24.1.1)
20221029 021625 worker: Netmask (255.255.255.0)
20221029 021625 worker: Gateway (192.168.1.1)
20221029 021625 worker: Pri DNS (127.0.0.1)
20221029 021625 worker: Domain (home)

and

Code:
20221029 021629 worker: Try (mount -t cifs "//MYCLOUDEX2ULTRA/Public" -o username="admin",password="Argot22&",rsize=61440,wsize=65536,iocharset=utf8,ro,noserverino,dir_mode=0777,file_mode=0777 "/mnt/NAS/nuevo")
20221029 021629 worker: Err (mount error: could not resolve address for MYCLOUDEX2ULTRA: Unknown error)

Regards,
Kent
Find
Reply
grandfunk69 Offline
Junior Member
*
Posts: 9
Threads: 3
Joined: Oct 2022
Reputation: 0
#5
10-30-2022, 09:08 AM (This post was last modified: 10-30-2022, 10:14 AM by grandfunk69.)
Yesterday after many tests, with several reboots, I could not mount my NAS. I did shutdown and turn off my raspberry pi.
This morning I connected moode again and surprisingly my NAS appeared mounted.
Continuing with the tests, I did a reboot to see the result and again the NAS appeared unmounted (red cross).
I have both logs (before and after reboot).
The difference I see is the following:

FIRST BOOT:

20221029 222047 worker: Try (mount -t cifs "//MYCLOUDEX2ULTRA/Public" -o username="admin",password="Argot22&",rsize=61440,wsize=65536,iocharset=utf8,ro,noserverino,dir_mode=0777,file_mode=07
77 "/mnt/NAS/nuevo")                                                                                                                                                                          
20221029 222047 worker: Err (mount error: could not resolve address for MYCLOUDEX2ULTRA: Unknown error)                                                                                       
20221029 222047 worker: Mount all submitted                                                                                                                                                   
20221029 222047 worker: --                                                                                                                                                                    
20221029 222047 worker: -- Feature availability                                                                                                                                               
20221029 222047 worker: --                                                                                                                                                                    
20221029 222047 worker: Source select (available)                                                                                                                                             
20221029 222047 worker: Source select (source: MPD)                                                                                                                                           
20221029 222047 worker: Source select (output: Pre Box S2 Digital)                                                                                                                            
20221029 222047 worker: Bluetooth (available)                                                                                                                                                 
20221029 222047 worker: AirPlay renderer (available)                                                                                                                                          
20221029 222047 worker: Spotify renderer (available)                                                                                                                                          
20221029 222047 worker: Squeezelite (available)                                                                                                                                               
20221029 222047 worker: RoonBridge renderer (not installed)                                                                                                                                   
20221029 222047 worker: Multiroom sender (available)                                                                                                                                          
20221029 222047 worker: Multiroom receiver (available)                                                                                                                                        
20221029 222047 worker: UPnP renderer (available: started)                                                                                                                                    
20221029 222047 worker: DLNA server (available)                                                                                                                                               
20221029 222047 worker: GPIO button handler (available)                                                                                                                                       
20221029 222047 worker: Stream recorder (n/a)                                                                                                                                                 
20221029 222047 worker: --                                                                                                                                                                    
20221029 222047 worker: -- Other                                                                                                                                                              
20221029 222047 worker: --                                                                                                                                                                    
20221029 222047 worker: USB volume knob (Off)                                                                                                                                                 
20221029 222048 worker: Shellinabox SSH started                                                                                                                                               
20221029 222048 worker: USB auto-mounter (udisks-glue)                                                                                                                                        
20221029 222048 worker: Saved MPD vol level (0)                                                                                                                                               
20221029 222048 worker: Preamp volume level (0)                                                                                                                                               
20221029 222048 worker: MPD volume level (100) restored                                                                                                                                       
20221029 222048 worker: ALSA Pre Box S2 Digital volume (100%)                                                                                                                                 
20221029 222048 worker: Auto-play (Off)                                                                                                                                                       
20221029 222048 worker: CoverView toggle (-off)                                                                                                                                               
20221029 222048 worker: On-screen keyboard (Off)                                                                                                                                              
20221029 222048 worker: Library scope (all)                                                                                                                                                   
20221029 222048 worker: Maintenance interval (360 minutes)                                                                                                                                    
20221029 222048 worker: Screen saver activation (Never)                                                                                                                                       
20221029 222048 worker: Session permissions (OK)                                                                                                                                              
20221029 222048 worker: Mount monitor started                                                                                                                                                 
20221029 222048 worker: Watchdog started                                                                                                                                                      
20221029 222048 worker: Ready                                                                                                                                                                 
20221030 041412 worker: Mount (mount -t cifs "//MYCLOUDEX2ULTRA/Public" -o username="admin",password="Argot22&",rsize=61440,wsize=65536,iocharset=utf8,vers=3.1.1,ro,noserverino,dir_mode=0777
,file_mode=0777 "/mnt/NAS/nuevo")            

*******************************************************
AFTER REBOOT:

20221030 043307 worker: Try (mount -t cifs "//MYCLOUDEX2ULTRA/Public" -o username="admin",password="Argot22&",rsize=61440,wsize=65536,iocharset=utf8,ro,noserverino,dir_mode=0777,file_mode=0777 "/mnt/NAS/nuevo")
20221030 043307 worker: Err (mount error: could not resolve address for MYCLOUDEX2ULTRA: Unknown error)
20221030 043307 worker: Mount all submitted
20221030 043307 worker: --
20221030 043307 worker: -- Feature availability
20221030 043307 worker: --
20221030 043307 worker: Source select (available)
20221030 043307 worker: Source select (source: MPD)
20221030 043307 worker: Source select (output: Pre Box S2 Digital)
20221030 043307 worker: Bluetooth (available)
20221030 043307 worker: AirPlay renderer (available)
20221030 043307 worker: Spotify renderer (available)
20221030 043307 worker: Squeezelite (available)
20221030 043307 worker: RoonBridge renderer (not installed)
20221030 043307 worker: Multiroom sender (available)
20221030 043307 worker: Multiroom receiver (available)
20221030 043307 worker: UPnP renderer (available: started)
20221030 043307 worker: DLNA server (available)
20221030 043307 worker: GPIO button handler (available)
20221030 043307 worker: Stream recorder (n/a)
20221030 043307 worker: --
20221030 043307 worker: -- Other
20221030 043307 worker: --
20221030 043307 worker: USB volume knob (Off)
20221030 043307 worker: Shellinabox SSH started
20221030 043307 worker: USB auto-mounter (udisks-glue)
20221030 043307 worker: Saved MPD vol level (0)
20221030 043307 worker: Preamp volume level (0)
20221030 043308 worker: MPD volume level (100) restored
20221030 043308 worker: ALSA Pre Box S2 Digital volume (100%)
20221030 043308 worker: Auto-play (Off)
20221030 043308 worker: CoverView toggle (-off)
20221030 043308 worker: On-screen keyboard (Off)
20221030 043308 worker: Library scope (all)
20221030 043308 worker: Maintenance interval (360 minutes)
20221030 043308 worker: Screen saver activation (Never)
20221030 043308 worker: Session permissions (OK)
20221030 043308 worker: Mount monitor started
20221030 043308 worker: Watchdog started
20221030 043308 worker: Ready
20221030 043348 waitWorker(): Start (lib-config, w_active=0)
20221030 043348 waitWorker(): End   (lib-config, w_active=0)

On first boot, run 'mount monitor started' option and add 'vers=3.1.1' parameter and all OK

After reboot, moode tries to mount the NAS, but without the parameter 'vers=3.1.1' and fails. Later don't try to mount NAS again after 'mount monitor started' option

Also I see: 20221030 041412 worker: Mount (OK Green tick) VS 20221030 043307 worker: Try (Fails Red Cross). That is, there are differences between the mount and try command.

Thanks in advance and happy sunday.
Find
Reply
Tim Curtis Online
moOde audio founder
******
Posts: 13,414
Threads: 304
Joined: Mar 2018
Reputation: 543
#6
10-30-2022, 11:27 AM
Reboot and post a complete startup log.
Enjoy the Music!
moodeaudio.org | Mastodon Feed | GitHub
Website Find
Reply
grandfunk69 Offline
Junior Member
*
Posts: 9
Threads: 3
Joined: Oct 2022
Reputation: 0
#7
10-30-2022, 11:52 AM
(10-30-2022, 11:27 AM)Tim Curtis Wrote: Reboot and post a complete startup log.

I have manually included the parameter vers=3.1.1, in the options in mount options, but I get the same result.

I have also corrected the network and the ip (Ethernet) appears correctly

[color=var(--adapttext)]20221030 074606 worker: --
20221030 074606 worker: -- Start moOde 8 series
20221030 074606 worker: --
20221030 074606 worker: Successfully daemonized
20221030 074609 worker: File check (OK)
20221030 074609 worker: Session vacuumed
20221030 074609 worker: Session loaded
20221030 074609 worker: Debug logging (ON)
20221030 074609 worker: --
20221030 074609 worker: -- Audio debug
20221030 074609 worker: --
20221030 074609 worker: ALSA cards: (0:b1 | 1Big Grinigital | 2:Headphones | 3:empty
20221030 074609 worker: MPD config: (1Tonguere Box S2 Digital | mixerSadPre Box S2 Digital ) | card:1)
20221030 074609 worker: ALSA mixer actual (Pre Box S2 Digital )
20221030 074609 worker: ALSA Pre Box S2 Digital volume set to (0%)
20221030 074609 worker: --
20221030 074609 worker: -- System
20221030 074609 worker: --
20221030 074611 worker: Host      (moode)
20221030 074611 worker: moOde     (8.2.2 2022-10-23)
20221030 074611 worker: RaspiOS   (11.5)
20221030 074611 worker: Kernel    (5.15.61-v7l+ #1579)
20221030 074611 worker: Platform  (Pi-4B 1.4 8GB)
20221030 074611 worker: ARM arch  (armv7l, 32-bit)
20221030 074611 worker: MPD ver   (0.23.5)
20221030 074611 worker: CPU gov   (ondemand)
20221030 074611 worker: USB boot  (enabled)
20221030 074611 worker: File sys  (expanded)
20221030 074611 worker: HDMI port (On)
20221030 074611 worker: Sys LED0  (On)
20221030 074611 worker: Sys LED1  (On)
20221030 074611 worker: --
20221030 074611 worker: -- Network
20221030 074611 worker: --
20221030 074611 worker: eth0 adapter exists
20221030 074611 worker: eth0 check for address (Yes)
20221030 074611 worker: eth0 address check (90 secs)
20221030 074611 worker: eth0 check 0 for IP address
20221030 074613 worker: eth0 check 1 for IP address
20221030 074615 worker: IP addr (192.168.1.147)
20221030 074615 worker: Netmask (255.255.255.0)
20221030 074615 worker: Gateway (192.168.1.1)
20221030 074615 worker: Pri DNS (192.168.1.1)
20221030 074615 worker: Domain  (home)
20221030 074615 worker: wlan0 adapter does not exist
20221030 074615 worker: apd0 router mode (Off)
20221030 074615 worker: --
20221030 074615 worker: -- Software update
20221030 074615 worker: --
20221030 074615 worker: Automatic check (Off)
20221030 074615 worker: --
20221030 074615 worker: -- Audio config
20221030 074615 worker: --
20221030 074615 worker: MPD conf update skipped (USB device)
20221030 074615 worker: ALSA card number (1)
20221030 074615 worker: MPD audio output (Pre Box S2 Digital)
20221030 074616 worker: Audio formats (S32_LE, SPECIAL, DSD_U32_BE)
20221030 074616 worker: ALSA mixer name (Pre Box S2 Digital )
20221030 074616 worker: MPD mixer type (software)
20221030 074616 worker: Hdwr volume controller exists
20221030 074616 worker: Max ALSA volume (100%)
20221030 074616 worker: ALSA output mode (Default: plughw)
20221030 074616 worker: ALSA loopback (Off)
20221030 074616 worker: Reset renderer active flags
20221030 074616 worker: CamillaDSP (off)
20221030 074616 worker: --
20221030 074616 worker: -- File sharing
20221030 074616 worker: --
20221030 074616 worker: SMB file sharing (On)
20221030 074616 worker: NFS file sharing (Off)
20221030 074616 worker: --
20221030 074616 worker: -- MPD startup
20221030 074616 worker: --
20221030 074617 worker: MPD started
20221030 074617 worker: MPD accepting connections
20221030 074617 worker: MPD output 1 ALSA Default (On)
20221030 074617 worker: MPD output 2 ALSA Bluetooth (Off)
20221030 074617 worker: MPD output 3 HTTP Server (Off)
20221030 074617 worker: MPD crossfade (off)
20221030 074617 worker: MPD ignore CUE files (yes)
20221030 074617 worker: --
20221030 074617 worker: -- Music sources
20221030 074617 worker: --
20221030 074617 worker: USB sources
20221030 074617 worker: No drives found
20221030 074617 worker: NAS sources
20221030 074617 worker: nuevo
20221030 074617 worker: Try (mount -t cifs "//MYCLOUDEX2ULTRA/Public" -o username="admin",password="Argot22&",rsize=61440,wsize=65536,iocharset=utf8,vers=3.1.1,ro,noserverino,dir_mode=0777,file_mode=0777 "/mnt/NAS/nuevo")
20221030 074617 worker: Err (mount error: could not resolve address for MYCLOUDEX2ULTRA: Unknown error)
20221030 074617 worker: Mount all submitted
20221030 074617 worker: --
20221030 074617 worker: -- Feature availability
20221030 074617 worker: --
20221030 074617 worker: Source select (available)
20221030 074617 worker: Source select (source: MPD)
20221030 074617 worker: Source select (output: Pre Box S2 Digital)
20221030 074617 worker: Bluetooth (available)
20221030 074617 worker: AirPlay renderer (available)
20221030 074617 worker: Spotify renderer (available)
20221030 074617 worker: Squeezelite (available)
20221030 074617 worker: RoonBridge renderer (not installed)
20221030 074617 worker: Multiroom sender (available)
20221030 074617 worker: Multiroom receiver (available)
20221030 074617 worker: UPnP renderer (available: started)
20221030 074617 worker: DLNA server (available)
20221030 074617 worker: GPIO button handler (available)
20221030 074617 worker: Stream recorder (n/a)
20221030 074617 worker: --
20221030 074617 worker: -- Other
20221030 074617 worker: --
20221030 074617 worker: USB volume knob (Off)
20221030 074618 worker: Shellinabox SSH started
20221030 074618 worker: USB auto-mounter (udisks-glue)
20221030 074618 worker: Saved MPD vol level (0)
20221030 074618 worker: Preamp volume level (0)
20221030 074618 worker: MPD volume level (100) restored
20221030 074618 worker: ALSA Pre Box S2 Digital volume (100%)
20221030 074618 worker: Auto-play (Off)
20221030 074618 worker: CoverView toggle (-off)
20221030 074618 worker: On-screen keyboard (Off)
20221030 074618 worker: Library scope (all)
20221030 074618 worker: Maintenance interval (360 minutes)
20221030 074618 worker: Screen saver activation (Never)
20221030 074618 worker: Session permissions (OK)
20221030 074618 worker: Mount monitor started
20221030 074618 worker: Watchdog started
20221030 074618 worker: Ready
20221030 074703 waitWorker(): Start (snd-config, w_active=0)
20221030 074703 waitWorker(): End   (snd-config, w_active=0)
20221030 074705 waitWorker(): Start (lib-config, w_active=0)
20221030 074705 waitWorker(): End   (lib-config, w_active=0)
20221030 074710 waitWorker(): Start (lib-config, w_active=0)
20221030 074710 waitWorker(): End   (lib-config, w_active=0)


[/color]
Close
Find
Reply
TheOldPresbyope Online
Moderator
****
Posts: 6,021
Threads: 176
Joined: Apr 2018
Reputation: 235
#8
10-30-2022, 12:15 PM (This post was last modified: 10-30-2022, 12:17 PM by TheOldPresbyope. Edit Reason: fix typo )
@grandfunk69

It is usually not necessary to force the SMB protocol version manually.

Instead, try just manually editing the share path either to add .local to the host name or to use its IP address instead. E.g,

MYCLOUDEX2ULTRA.local/Public

or

192.168.1.x/Public

(Replace “x” by the correct number).

Regards,
Kent
Find
Reply
grandfunk69 Offline
Junior Member
*
Posts: 9
Threads: 3
Joined: Oct 2022
Reputation: 0
#9
10-30-2022, 12:26 PM
(10-30-2022, 12:15 PM)TheOldPresbyope Wrote: @grandfunk69

It is usually not necessary to force the SMB protocol version manually.

Instead, try just manually editing the share path either to add .local to the host name or to use its IP address instead. E.g,

MYCLOUDEX2ULTRA.local/Public

or

192.168.1.x/Public

(Replace “x” by the correct number).

Regards,
Kent



It has worked!!! (MYCLOUDEX2ULTRA.local/Public) Now updating the library.

Thank you very much again and sorry for all the inconvenience
Find
Reply


Forum Jump: