[PROBLEM] Screen no signal after screen blanks

[kuduacz]

i added my new 7 inch screen to my rpi via hdmi.
set local display and it work as it expect.
But when screen goes to blank after few seconds goes to blue and "no signal" info.
How can i fix it?

[Tim Curtis]

What make and model is the screen?

[kuduacz]

I am afraid IT is one of "noname"
[img]blob:https://moodeaudio.org/a5eb6f50-7070-4ea0-a801-1a1b74e1fb4b[/img]

[Tim Curtis]

You probably need to contact the manufacturer and ask about settings that can be used to control the screen.

[kuduacz]

You probably need to contact the manufacturer and ask about settings that can be used to control the screen.

Unfortunetally i bought IT as used from other person.
Any entries to config.txt could help?

[TheOldPresbyope]

You probably need to contact the manufacturer and ask about settings that can be used to control the screen.

Unfortunetally i bought IT as used from other person.
Any entries to config.txt could help?

HDMI blanking is a Raspberry Pi OS function. I’d suggest trying the Raspberry Pi Forum. There’s already at least one old thread there about one user’s blanking issues with different Pi models.

Regards,
Kent

[kuduacz]

You probably need to contact the manufacturer and ask about settings that can be used to control the screen.

Unfortunetally i bought IT as used from other person.
Any entries to config.txt could help?

HDMI blanking is a Raspberry Pi OS function. I’d suggest trying the Raspberry Pi Forum. There’s already at least one old thread there about one user’s blanking issues with different Pi models.

Regards,
Kent

Thanks for reply. 
Can you share name of that topic?
Looking there and found some similiar topics but its about no signal for 1sts seconds even on boot.
And i think there is no that issue on rpi 2 or 3, just on 4