Thanks Al....
Hhhmm......went to this page:
https://github.com/okunze/Argon40-ArgonOne-Script
and was then directed to this script....which I saved as text...I'm now totally terrified!!!
Here it is........
#!/bin/bash
argon_create_file() {
if [ -f $1 ]; then
sudo rm $1
fi
sudo touch $1
sudo chmod 666 $1
}
argon_check_pkg() {
RESULT=$(dpkg-query -W -f='${Status}\n' "$1" 2> /dev/null | grep "installed")
if [ "" == "$RESULT" ]; then
echo "NG"
else
echo "OK"
fi
}
# Check if Raspbian, Ubuntu, others
CHECKPLATFORM="Others"
if [ -f "/etc/os-release" ]
then
source /etc/os-release
if [ "$ID" = "raspbian" ]
then
CHECKPLATFORM="Raspbian"
elif [ "$ID" = "ubuntu" ]
then
CHECKPLATFORM="Ubuntu"
fi
fi
if [ "$CHECKPLATFORM" = "Raspbian" ]
then
pkglist=(raspi-gpio python3-rpi.gpio python3-smbus i2c-tools)
else
# Todo handle lgpio
# Ubuntu has serial and i2c enabled
pkglist=(python3-rpi.gpio python3-smbus i2c-tools)
fi
for curpkg in ${pkglist[@]}; do
sudo apt-get install -y $curpkg
RESULT=$(argon_check_pkg "$curpkg")
if [ "NG" == "$RESULT" ]
then
echo "********************************************************************"
echo "Please also connect device to the internet and restart installation."
echo "********************************************************************"
exit
fi
done
# Ubuntu Mate for RPi has raspi-config too
command -v raspi-config &> /dev/null
if [ $? -eq 0 ]
then
# Enable i2c and serial
sudo raspi-config nonint do_i2c 0
sudo raspi-config nonint do_serial 2
fi
# Helper variables
daemonname="argononed"
powerbuttonscript=/usr/bin/$daemonname.py
shutdownscript="/lib/systemd/system-shutdown/"$daemonname"-poweroff.py"
daemonconfigfile=/etc/$daemonname.conf
configscript=/usr/bin/argonone-config
removescript=/usr/bin/argonone-uninstall
daemonfanservice=/lib/systemd/system/$daemonname.service
if [ ! -f $daemonconfigfile ]; then
# Generate config file for fan speed
sudo touch $daemonconfigfile
sudo chmod 666 $daemonconfigfile
echo '#' >> $daemonconfigfile
echo '# Argon One Fan Configuration' >> $daemonconfigfile
echo '#' >> $daemonconfigfile
echo '# List below the temperature (Celsius) and fan speed (in percent) pairs' >> $daemonconfigfile
echo '# Use the following form:' >> $daemonconfigfile
echo '# min.temperature=speed' >> $daemonconfigfile
echo '#' >> $daemonconfigfile
echo '# Example:' >> $daemonconfigfile
echo '# 55=10' >> $daemonconfigfile
echo '# 60=55' >> $daemonconfigfile
echo '# 65=100' >> $daemonconfigfile
echo '#' >> $daemonconfigfile
echo '# Above example sets the fan speed to' >> $daemonconfigfile
echo '#' >> $daemonconfigfile
echo '# NOTE: Lines begining with # are ignored' >> $daemonconfigfile
echo '#' >> $daemonconfigfile
echo '# Type the following at the command line for changes to take effect:' >> $daemonconfigfile
echo '# sudo systemctl restart '$daemonname'.service' >> $daemonconfigfile
echo '#' >> $daemonconfigfile
echo '# Start below:' >> $daemonconfigfile
echo '55=10' >> $daemonconfigfile
echo '60=55' >> $daemonconfigfile
echo '65=100' >> $daemonconfigfile
fi
# Generate script that runs every shutdown event
argon_create_file $shutdownscript
echo "#!/usr/bin/python3" >> $shutdownscript
echo 'import sys' >> $shutdownscript
echo 'import smbus' >> $shutdownscript
echo 'import RPi.GPIO as GPIO' >> $shutdownscript
echo 'rev = GPIO.RPI_REVISION' >> $shutdownscript
echo 'if rev == 2 or rev == 3:' >> $shutdownscript
echo ' bus = smbus.SMBus(1)' >> $shutdownscript
echo 'else:' >> $shutdownscript
echo ' bus = smbus.SMBus(0)' >> $shutdownscript
echo 'if len(sys.argv)>1:' >> $shutdownscript
echo " bus.write_byte(0x1a,0)" >> $shutdownscript
# powercut signal
echo ' if sys.argv[1] == "poweroff" or sys.argv[1] == "halt":' >> $shutdownscript
echo " try:" >> $shutdownscript
echo " bus.write_byte(0x1a,0xFF)" >> $shutdownscript
echo " except:" >> $shutdownscript
echo " rev=0" >> $shutdownscript
sudo chmod 755 $shutdownscript
# Generate script to monitor shutdown button
argon_create_file $powerbuttonscript
echo "#!/usr/bin/python3" >> $powerbuttonscript
echo 'import smbus' >> $powerbuttonscript
echo 'import RPi.GPIO as GPIO' >> $powerbuttonscript
echo 'import os' >> $powerbuttonscript
echo 'import time' >> $powerbuttonscript
echo 'from threading import Thread' >> $powerbuttonscript
echo 'rev = GPIO.RPI_REVISION' >> $powerbuttonscript
echo 'if rev == 2 or rev == 3:' >> $powerbuttonscript
echo ' bus = smbus.SMBus(1)' >> $powerbuttonscript
echo 'else:' >> $powerbuttonscript
echo ' bus = smbus.SMBus(0)' >> $powerbuttonscript
echo 'GPIO.setwarnings(False)' >> $powerbuttonscript
echo 'GPIO.setmode(GPIO.BCM)' >> $powerbuttonscript
echo 'shutdown_pin=4' >> $powerbuttonscript
echo 'GPIO.setup(shutdown_pin, GPIO.IN, pull_up_down=GPIO.PUD_DOWN)' >> $powerbuttonscript
echo 'def shutdown_check():' >> $powerbuttonscript
echo ' while True:' >> $powerbuttonscript
echo ' pulsetime = 1' >> $powerbuttonscript
echo ' GPIO.wait_for_edge(shutdown_pin, GPIO.RISING)' >> $powerbuttonscript
echo ' time.sleep(0.01)' >> $powerbuttonscript
echo ' while GPIO.input(shutdown_pin) == GPIO.HIGH:' >> $powerbuttonscript
echo ' time.sleep(0.01)' >> $powerbuttonscript
echo ' pulsetime += 1' >> $powerbuttonscript
echo ' if pulsetime >=2 and pulsetime <=3:' >> $powerbuttonscript
echo ' os.system("reboot")' >> $powerbuttonscript
echo ' elif pulsetime >=4 and pulsetime <=5:' >> $powerbuttonscript
echo ' os.system("shutdown now -h")' >> $powerbuttonscript
echo 'def get_fanspeed(tempval, configlist):' >> $powerbuttonscript
echo ' for curconfig in configlist:' >> $powerbuttonscript
echo ' curpair = curconfig.split("=")' >> $powerbuttonscript
echo ' tempcfg = float(curpair[0])' >> $powerbuttonscript
echo ' fancfg = int(float(curpair[1]))' >> $powerbuttonscript
echo ' if tempval >= tempcfg:' >> $powerbuttonscript
echo ' if fancfg < 1:' >> $powerbuttonscript
echo ' return 0' >> $powerbuttonscript
echo ' elif fancfg < 25:' >> $powerbuttonscript
echo ' return 25' >> $powerbuttonscript
echo ' return fancfg' >> $powerbuttonscript
echo ' return 0' >> $powerbuttonscript
echo 'def load_config(fname):' >> $powerbuttonscript
echo ' newconfig = []' >> $powerbuttonscript
echo ' try:' >> $powerbuttonscript
echo ' with open(fname, "r") as fp:' >> $powerbuttonscript
echo ' for curline in fp:' >> $powerbuttonscript
echo ' if not curline:' >> $powerbuttonscript
echo ' continue' >> $powerbuttonscript
echo ' tmpline = curline.strip()' >> $powerbuttonscript
echo ' if not tmpline:' >> $powerbuttonscript
echo ' continue' >> $powerbuttonscript
echo ' if tmpline[0] == "#":' >> $powerbuttonscript
echo ' continue' >> $powerbuttonscript
echo ' tmppair = tmpline.split("=")' >> $powerbuttonscript
echo ' if len(tmppair) != 2:' >> $powerbuttonscript
echo ' continue' >> $powerbuttonscript
echo ' tempval = 0' >> $powerbuttonscript
echo ' fanval = 0' >> $powerbuttonscript
echo ' try:' >> $powerbuttonscript
echo ' tempval = float(tmppair[0])' >> $powerbuttonscript
echo ' if tempval < 0 or tempval > 100:' >> $powerbuttonscript
echo ' continue' >> $powerbuttonscript
echo ' except:' >> $powerbuttonscript
echo ' continue' >> $powerbuttonscript
echo ' try:' >> $powerbuttonscript
echo ' fanval = int(float(tmppair[1]))' >> $powerbuttonscript
echo ' if fanval < 0 or fanval > 100:' >> $powerbuttonscript
echo ' continue' >> $powerbuttonscript
echo ' except:' >> $powerbuttonscript
echo ' continue' >> $powerbuttonscript
echo ' newconfig.append( "{:5.1f}={}".format(tempval,fanval))' >> $powerbuttonscript
echo ' if len(newconfig) > 0:' >> $powerbuttonscript
echo ' newconfig.sort(reverse=True)' >> $powerbuttonscript
echo ' except:' >> $powerbuttonscript
echo ' return []' >> $powerbuttonscript
echo ' return newconfig' >> $powerbuttonscript
echo 'def temp_check():' >> $powerbuttonscript
echo ' fanconfig = ["65=100", "60=55", "55=10"]' >> $powerbuttonscript
echo ' tmpconfig = load_config("'$daemonconfigfile'")' >> $powerbuttonscript
echo ' if len(tmpconfig) > 0:' >> $powerbuttonscript
echo ' fanconfig = tmpconfig' >> $powerbuttonscript
echo ' address=0x1a' >> $powerbuttonscript
echo ' prevblock=0' >> $powerbuttonscript
echo ' while True:' >> $powerbuttonscript
echo ' try:' >> $powerbuttonscript
echo ' tempfp = open("/sys/class/thermal/thermal_zone0/temp", "r")' >> $powerbuttonscript
echo ' temp = tempfp.readline()' >> $powerbuttonscript
echo ' tempfp.close()' >> $powerbuttonscript
echo ' val = float(int(temp)/1000)' >> $powerbuttonscript
echo ' except IOError:' >> $powerbuttonscript
echo ' val = 0' >> $powerbuttonscript
echo ' block = get_fanspeed(val, fanconfig)' >> $powerbuttonscript
echo ' if block < prevblock:' >> $powerbuttonscript
echo ' time.sleep(30)' >> $powerbuttonscript
echo ' prevblock = block' >> $powerbuttonscript
echo ' try:' >> $powerbuttonscript
echo ' if block > 0:' >> $powerbuttonscript
echo ' bus.write_byte(address,100)' >> $powerbuttonscript
echo ' time.sleep(1)' >> $powerbuttonscript
echo ' bus.write_byte(address,block)' >> $powerbuttonscript
echo ' except IOError:' >> $powerbuttonscript
echo ' temp=""' >> $powerbuttonscript
echo ' time.sleep(30)' >> $powerbuttonscript
echo 'try:' >> $powerbuttonscript
echo ' t1 = Thread(target = shutdown_check)' >> $powerbuttonscript
echo ' t2 = Thread(target = temp_check)' >> $powerbuttonscript
echo ' t1.start()' >> $powerbuttonscript
echo ' t2.start()' >> $powerbuttonscript
echo 'except:' >> $powerbuttonscript
echo ' t1.stop()' >> $powerbuttonscript
echo ' t2.stop()' >> $powerbuttonscript
echo ' GPIO.cleanup()' >> $powerbuttonscript
sudo chmod 755 $powerbuttonscript
argon_create_file $daemonfanservice
# Fan Daemon
echo "[Unit]" >> $daemonfanservice
echo "Description=Argon One Fan and Button Service" >> $daemonfanservice
echo "After=multi-user.target" >> $daemonfanservice
echo '[Service]' >> $daemonfanservice
echo 'Type=simple' >> $daemonfanservice
echo "Restart=always" >> $daemonfanservice
echo "RemainAfterExit=true" >> $daemonfanservice
echo "ExecStart=/usr/bin/python3 $powerbuttonscript" >> $daemonfanservice
echo '[Install]' >> $daemonfanservice
echo "WantedBy=multi-user.target" >> $daemonfanservice
sudo chmod 644 $daemonfanservice
argon_create_file $removescript
# Uninstall Script
echo '#!/bin/bash' >> $removescript
echo 'echo "-------------------------"' >> $removescript
echo 'echo "Argon One Uninstall Tool"' >> $removescript
echo 'echo "-------------------------"' >> $removescript
echo 'echo -n "Press Y to continue:"' >> $removescript
echo 'read -n 1 confirm' >> $removescript
echo 'echo' >> $removescript
echo 'if [ "$confirm" = "y" ]' >> $removescript
echo 'then' >> $removescript
echo ' confirm="Y"' >> $removescript
echo 'fi' >> $removescript
echo '' >> $removescript
echo 'if [ "$confirm" != "Y" ]' >> $removescript
echo 'then' >> $removescript
echo ' echo "Cancelled"' >> $removescript
echo ' exit' >> $removescript
echo 'fi' >> $removescript
echo 'if [ -d "/home/pi/Desktop" ]; then' >> $removescript
echo ' sudo rm "/home/pi/Desktop/argonone-config.desktop"' >> $removescript
echo ' sudo rm "/home/pi/Desktop/argonone-uninstall.desktop"' >> $removescript
echo 'fi' >> $removescript
echo 'if [ -f '$powerbuttonscript' ]; then' >> $removescript
echo ' sudo systemctl stop '$daemonname'.service' >> $removescript
echo ' sudo systemctl disable '$daemonname'.service' >> $removescript
echo ' sudo /usr/bin/python3 '$shutdownscript' uninstall' >> $removescript
echo ' sudo rm '$powerbuttonscript >> $removescript
echo ' sudo rm '$shutdownscript >> $removescript
echo ' sudo rm '$removescript >> $removescript
echo ' echo "Removed Argon One Services."' >> $removescript
echo ' echo "Cleanup will complete after restarting the device."' >> $removescript
echo 'fi' >> $removescript
sudo chmod 755 $removescript
argon_create_file $configscript
# Config Script
echo '#!/bin/bash' >> $configscript
echo 'daemonconfigfile='$daemonconfigfile >> $configscript
echo 'echo "--------------------------------------"' >> $configscript
echo 'echo "Argon One Fan Speed Configuration Tool"' >> $configscript
echo 'echo "--------------------------------------"' >> $configscript
echo 'echo "WARNING: This will remove existing configuration."' >> $configscript
echo 'echo -n "Press Y to continue:"' >> $configscript
echo 'read -n 1 confirm' >> $configscript
echo 'echo' >> $configscript
echo 'if [ "$confirm" = "y" ]' >> $configscript
echo 'then' >> $configscript
echo ' confirm="Y"' >> $configscript
echo 'fi' >> $configscript
echo '' >> $configscript
echo 'if [ "$confirm" != "Y" ]' >> $configscript
echo 'then' >> $configscript
echo ' echo "Cancelled"' >> $configscript
echo ' exit' >> $configscript
echo 'fi' >> $configscript
echo 'echo "Thank you."' >> $configscript
echo 'get_number () {' >> $configscript
echo ' read curnumber' >> $configscript
echo ' if [ -z "$curnumber" ]' >> $configscript
echo ' then' >> $configscript
echo ' echo "-2"' >> $configscript
echo ' return' >> $configscript
echo ' elif [[ $curnumber =~ ^[+-]?[0-9]+$ ]]' >> $configscript
echo ' then' >> $configscript
echo ' if [ $curnumber -lt 0 ]' >> $configscript
echo ' then' >> $configscript
echo ' echo "-1"' >> $configscript
echo ' return' >> $configscript
echo ' elif [ $curnumber -gt 100 ]' >> $configscript
echo ' then' >> $configscript
echo ' echo "-1"' >> $configscript
echo ' return' >> $configscript
echo ' fi ' >> $configscript
echo ' echo $curnumber' >> $configscript
echo ' return' >> $configscript
echo ' fi' >> $configscript
echo ' echo "-1"' >> $configscript
echo ' return' >> $configscript
echo '}' >> $configscript
echo '' >> $configscript
echo 'loopflag=1' >> $configscript
echo 'while [ $loopflag -eq 1 ]' >> $configscript
echo 'do' >> $configscript
echo ' echo' >> $configscript
echo ' echo "Select fan mode:"' >> $configscript
echo ' echo " 1. Always on"' >> $configscript
echo ' echo " 2. Adjust to temperatures (55C, 60C, and 65C)"' >> $configscript
echo ' echo " 3. Customize behavior"' >> $configscript
echo ' echo " 4. Cancel"' >> $configscript
echo ' echo "NOTE: You can also edit $daemonconfigfile directly"' >> $configscript
echo ' echo -n "Enter Number (1-4):"' >> $configscript
echo ' newmode=$( get_number )' >> $configscript
echo ' if [[ $newmode -ge 1 && $newmode -le 4 ]]' >> $configscript
echo ' then' >> $configscript
echo ' loopflag=0' >> $configscript
echo ' fi' >> $configscript
echo 'done' >> $configscript
echo 'echo' >> $configscript
echo 'if [ $newmode -eq 4 ]' >> $configscript
echo 'then' >> $configscript
echo ' echo "Cancelled"' >> $configscript
echo ' exit' >> $configscript
echo 'elif [ $newmode -eq 1 ]' >> $configscript
echo 'then' >> $configscript
echo ' echo "#" > $daemonconfigfile' >> $configscript
echo ' echo "# Argon One Fan Speed Configuration" >> $daemonconfigfile' >> $configscript
echo ' echo "#" >> $daemonconfigfile' >> $configscript
echo ' echo "# Min Temp=Fan Speed" >> $daemonconfigfile' >> $configscript
echo ' echo 1"="100 >> $daemonconfigfile' >> $configscript
echo ' sudo systemctl restart '$daemonname'.service' >> $configscript
echo ' echo "Fan always on."' >> $configscript
echo ' exit' >> $configscript
echo 'elif [ $newmode -eq 2 ]' >> $configscript
echo 'then' >> $configscript
echo ' echo "Please provide fan speeds for the following temperatures:"' >> $configscript
echo ' echo "#" > $daemonconfigfile' >> $configscript
echo ' echo "# Argon One Fan Speed Configuration" >> $daemonconfigfile' >> $configscript
echo ' echo "#" >> $daemonconfigfile' >> $configscript
echo ' echo "# Min Temp=Fan Speed" >> $daemonconfigfile' >> $configscript
echo ' curtemp=55' >> $configscript
echo ' while [ $curtemp -lt 70 ]' >> $configscript
echo ' do' >> $configscript
echo ' errorfanflag=1' >> $configscript
echo ' while [ $errorfanflag -eq 1 ]' >> $configscript
echo ' do' >> $configscript
echo ' echo -n ""$curtemp"C (0-100 only):"' >> $configscript
echo ' curfan=$( get_number )' >> $configscript
echo ' if [ $curfan -ge 0 ]' >> $configscript
echo ' then' >> $configscript
echo ' errorfanflag=0' >> $configscript
echo ' fi' >> $configscript
echo ' done' >> $configscript
echo ' echo $curtemp"="$curfan >> $daemonconfigfile' >> $configscript
echo ' curtemp=$((curtemp+5))' >> $configscript
echo ' done' >> $configscript
echo ' sudo systemctl restart '$daemonname'.service' >> $configscript
echo ' echo "Configuration updated."' >> $configscript
echo ' exit' >> $configscript
echo 'fi' >> $configscript
echo 'echo "Please provide fan speeds and temperature pairs"' >> $configscript
echo 'echo' >> $configscript
echo 'loopflag=1' >> $configscript
echo 'paircounter=0' >> $configscript
echo 'while [ $loopflag -eq 1 ]' >> $configscript
echo 'do' >> $configscript
echo ' errortempflag=1' >> $configscript
echo ' errorfanflag=1' >> $configscript
echo ' while [ $errortempflag -eq 1 ]' >> $configscript
echo ' do' >> $configscript
echo ' echo -n "Provide minimum temperature (in Celsius) then [ENTER]:"' >> $configscript
echo ' curtemp=$( get_number )' >> $configscript
echo ' if [ $curtemp -ge 0 ]' >> $configscript
echo ' then' >> $configscript
echo ' errortempflag=0' >> $configscript
echo ' elif [ $curtemp -eq -2 ]' >> $configscript
echo ' then' >> $configscript
echo ' errortempflag=0' >> $configscript
echo ' errorfanflag=0' >> $configscript
echo ' loopflag=0' >> $configscript
echo ' fi' >> $configscript
echo ' done' >> $configscript
echo ' while [ $errorfanflag -eq 1 ]' >> $configscript
echo ' do' >> $configscript
echo ' echo -n "Provide fan speed for "$curtemp"C (0-100) then [ENTER]:"' >> $configscript
echo ' curfan=$( get_number )' >> $configscript
echo ' if [ $curfan -ge 0 ]' >> $configscript
echo ' then' >> $configscript
echo ' errorfanflag=0' >> $configscript
echo ' elif [ $curfan -eq -2 ]' >> $configscript
echo ' then' >> $configscript
echo ' errortempflag=0' >> $configscript
echo ' errorfanflag=0' >> $configscript
echo ' loopflag=0' >> $configscript
echo ' fi' >> $configscript
echo ' done' >> $configscript
echo ' if [ $loopflag -eq 1 ]' >> $configscript
echo ' then' >> $configscript
echo ' if [ $paircounter -eq 0 ]' >> $configscript
echo ' then' >> $configscript
echo ' echo "#" > $daemonconfigfile' >> $configscript
echo ' echo "# Argon One Fan Speed Configuration" >> $daemonconfigfile' >> $configscript
echo ' echo "#" >> $daemonconfigfile' >> $configscript
echo ' echo "# Min Temp=Fan Speed" >> $daemonconfigfile' >> $configscript
echo ' fi' >> $configscript
echo ' echo $curtemp"="$curfan >> $daemonconfigfile' >> $configscript
echo ' ' >> $configscript
echo ' paircounter=$((paircounter+1))' >> $configscript
echo ' ' >> $configscript
echo ' echo "* Fan speed will be set to "$curfan" once temperature reaches "$curtemp" C"' >> $configscript
echo ' echo' >> $configscript
echo ' fi' >> $configscript
echo 'done' >> $configscript
echo '' >> $configscript
echo 'echo' >> $configscript
echo 'if [ $paircounter -gt 0 ]' >> $configscript
echo 'then' >> $configscript
echo ' echo "Thank you! We saved "$paircounter" pairs."' >> $configscript
echo ' sudo systemctl restart '$daemonname'.service' >> $configscript
echo ' echo "Changes should take effect now."' >> $configscript
echo 'else' >> $configscript
echo ' echo "Cancelled, no data saved."' >> $configscript
echo 'fi' >> $configscript
sudo chmod 755 $configscript
sudo systemctl daemon-reload
sudo systemctl enable $daemonname.service
sudo systemctl start $daemonname.service
shortcutfile="/home/pi/Desktop/argonone-config.desktop"
if [ "$CHECKPLATFORM" = "Raspbian" ] && [ -d "/home/pi/Desktop" ]
then
terminalcmd="lxterminal --working-directory=/home/pi/ -t"
if [ -f "/home/pi/.twisteros.twid" ]
then
terminalcmd="xfce4-terminal --default-working-directory=/home/pi/ -T"
fi
sudo wget
http://download.argon40.com/ar1config.png -O /usr/share/pixmaps/ar1config.png --quiet
sudo wget
http://download.argon40.com/ar1uninstall.png -O /usr/share/pixmaps/ar1uninstall.png --quiet
# Create Shortcuts
echo "[Desktop Entry]" > $shortcutfile
echo "Name=Argon One Configuration" >> $shortcutfile
echo "Comment=Argon One Configuration" >> $shortcutfile
echo "Icon=/usr/share/pixmaps/ar1config.png" >> $shortcutfile
echo 'Exec='$terminalcmd' "Argon One Configuration" -e '$configscript >> $shortcutfile
echo "Type=Application" >> $shortcutfile
echo "Encoding=UTF-8" >> $shortcutfile
echo "Terminal=false" >> $shortcutfile
echo "Categories=None;" >> $shortcutfile
chmod 755 $shortcutfile
shortcutfile="/home/pi/Desktop/argonone-uninstall.desktop"
echo "[Desktop Entry]" > $shortcutfile
echo "Name=Argon One Uninstall" >> $shortcutfile
echo "Comment=Argon One Uninstall" >> $shortcutfile
echo "Icon=/usr/share/pixmaps/ar1uninstall.png" >> $shortcutfile
echo 'Exec='$terminalcmd' -t "Argon One Uninstall" --working-directory=/home/pi/ -e '$removescript >> $shortcutfile
echo "Type=Application" >> $shortcutfile
echo "Encoding=UTF-8" >> $shortcutfile
echo "Terminal=false" >> $shortcutfile
echo "Categories=None;" >> $shortcutfile
chmod 755 $shortcutfile
fi
# IR config script
sudo wget
https://download.argon40.com/argonone-irconfig.sh -O /usr/bin/argonone-ir --quiet
sudo chmod 755 /usr/bin/argonone-ir
echo "***************************"
echo "Argon One Setup Completed."
echo "***************************"
echo
if [ ! "$CHECKPLATFORM" = "Raspbian" ]
then
echo "You may need to reboot for changes to take effect"
echo
fi
if [ -f $shortcutfile ]; then
echo Shortcuts created in your desktop.
else
echo Use 'argonone-config' to configure fan
echo Use 'argonone-uninstall' to uninstall
fi
echo
