moodeaudio.org > Moode Forum › moOde audio player › Support v
Raspberry Imager for Moode Audio

Thank you for your donation!


Cloudsmith graciously provides open-source package management and distribution for our project.


Thread Modes
Raspberry Imager for Moode Audio
Theunis Mulder Offline
Junior Member
*
Posts: 12
Threads: 3
Joined: Oct 2021
Reputation: 0
#1
06-24-2023, 07:04 AM
I hope somebody can assist me with a link to a video or steps to follow on how to install and configure Moode on a raspberry PI. (This is with the new process to install Moode via Raspberry PI Imager.) For some reason I am not able to install Moode on a raspberry PI With a network cable or headless. I have followed the setup guideline but somewhere I am doing something wrong. I CAN can ping new IP, but are not able to login. Please assist.
Find
Reply
Nutul Offline
Senior Member+
*
Posts: 1,282
Threads: 24
Joined: Jun 2022
Reputation: 42
#2
06-24-2023, 08:20 AM
(06-24-2023, 07:04 AM)Theunis Mulder Wrote: I hope somebody can assist me with a link to a video or steps to follow on how to install and configure Moode on a raspberry PI. (This is with the new process to install Moode via Raspberry PI Imager.) For some reason I am not able to install Moode on a raspberry PI With a network cable or headless. I have followed the setup guideline but somewhere I am doing something wrong. I CAN can ping new IP, but are not able to login. Please assist.

Assuming you have configured the image correctly before flashing it, to access moOde's web interface just open your browser, then in the address bar enter the following:

http://moode.local

or, if you experience any problem with the local dns, just enter the address you are able to ping:

http://192.168.1.100 (for example)
Cheers, Al.

https://groovesetter.net

Find
Reply
DRONE7 Offline
Senior Member+
*
Posts: 1,538
Threads: 106
Joined: Mar 2018
Reputation: 73
#3
06-24-2023, 08:24 AM
(06-24-2023, 07:04 AM)Theunis Mulder Wrote: I hope somebody can assist me with a link to a video or steps to follow on how to install and configure Moode on a raspberry PI. (This is with the new process to install Moode via Raspberry PI Imager.) For some reason I am not able to install Moode on a raspberry PI With a network cable or headless. I have followed the setup guideline but somewhere I am doing something wrong. I CAN can ping new IP, but are not able to login. Please assist.

Have you read the setup guide ?
https://github.com/moode-player/moode/bl.../setup.txt
set a user and password during the imager install  then when you move the SD-card to the Pi it should boot fine.
As you are using ethernet there should be no problems.
----------
bob
Find
Reply
Theunis Mulder Offline
Junior Member
*
Posts: 12
Threads: 3
Joined: Oct 2021
Reputation: 0
#4
06-30-2023, 05:39 PM
I think my mini SD card was the problem. I replaced it with a new card. It seem to be OK after a format the 16Gb card (FAT32) and then use Imager to install Moore audio. For me as not a regular user it was more of a problem on PI Zero. But been solved. Only one problem now, will create a separate thread. Installing room bridge.
Find
Reply


Forum Jump: