moodeaudio.org > Moode Forum › moOde audio player › Support v
[PROBLEM] Installation of Room Bridge on PI3 with Moode OS on

Thank you for your donation!


Cloudsmith graciously provides open-source package management and distribution for our project.


Thread Modes
Problem: Installation of Room Bridge on PI3 with Moode OS on
Theunis Mulder Offline
Junior Member
*
Posts: 12
Threads: 3
Joined: Oct 2021
Reputation: 0
#1
06-30-2023, 06:09 PM
I was able to install Room Bridge on Pi 3B with Moode OS on. DAC been used is the Allowed Piano 2.1. The one setup was installed with the older version of raspberry Pi where it was still not required to use Imager install. That setup is still working fine. Only use Land connection, WIFI is disabled.

The other setup is actually the same hardware equipment. I am able to install Moode with Imager App and Roon bridge as per instruction oon Roon bridge web site. I am able to use Room remote to access Pi and play content from my ROON core or Tidal fine until I switch of Room bridge and then switch of Moore on Pi.

The day after if I want to switch on Pi3b with Moode OS and Room bridge on. I have noticed that yellow light on PI3b remains on and does not start flickering as normal on all my other 3 PI3 setups. I am using static IP address, not able to ping or access Pi3, IP address is no where to find. If I then restart Pi3b only RED led comes on remain steady on. Yellow LED never comes on.
 Is it possible that there is something different on the latest version of Moode that I am doing wrong with Imager installation process. Been a long time user of Moore audio.
Find
Reply
Tim Curtis Online
moOde audio founder
******
Posts: 13,445
Threads: 305
Joined: Mar 2018
Reputation: 545
#2
06-30-2023, 07:32 PM
The symptoms suggests a bad uSD card.

Try a different card and without installing RoonBriidge software and verify that boot/reboot is successful.

Then install RoonBridge and re-test.
Enjoy the Music!
moodeaudio.org | Mastodon Feed | GitHub
Website Find
Reply
Theunis Mulder Offline
Junior Member
*
Posts: 12
Threads: 3
Joined: Oct 2021
Reputation: 0
#3
07-01-2023, 05:56 AM
Good day Tim

I will try an get hold of a different brand micro SD card and will revert back on my findings
Find
Reply
Theunis Mulder Offline
Junior Member
*
Posts: 12
Threads: 3
Joined: Oct 2021
Reputation: 0
#4
07-01-2023, 08:32 AM (This post was last modified: 07-01-2023, 09:49 AM by DRONE7. Edit Reason: https://moodeaudio.org/forum/showthread.php?tid=4654&pid=38949#pid38949 )
(07-01-2023, 05:56 AM)Theunis Mulder Wrote: Good day Tim

I will try an get hold of a different brand micro SD card and will revert back on my findings

Good Day Tim

I am using a different 64Gb Patriot this time around. Installed Moode OS 64 bit via Imager on PI-3 1.2 1GB. Configured Moode.

Shutdown and restart fine without any issues - see below start log file.


Code:
20230701 094642 worker: --
20230701 094642 worker: -- Start moOde 8 series
20230701 094642 worker: --
20230701 094642 worker: Successfully daemonized
20230701 094642 worker: Waiting for Linux startup...
20230701 094648 worker: Linux startup complete
20230701 094648 worker: Boot config backed up
20230701 094653 worker: File check (OK)
20230701 094655 worker: Session vacuumed
20230701 094655 worker: Session loaded
20230701 094655 worker: Debug logging (ON)
20230701 094655 worker: --
20230701 094655 worker: -- Audio debug
20230701 094655 worker: --
20230701 094655 worker: ALSA cards: (0:PianoDACPlus | 1:empty | 2:empty | 3:empty
20230701 094655 worker: MPD config: (0:Allo Piano 2.1 Hi-Fi DAC | mixer:(Master) | card:0)
20230701 094655 worker: ALSA mixer actual (Master)
20230701 094655 worker: ALSA Master volume set to (0%)
20230701 094655 worker: --
20230701 094655 worker: -- System
20230701 094655 worker: --
20230701 094658 worker: Host      (moode)
20230701 094658 worker: Hardware  (Pi-3B 1.2 1GB)
20230701 094659 worker: moOde     (8.3.3 2023-06-08)
20230701 094659 worker: RaspiOS   (11.7)
20230701 094659 worker: Kernel    (6.1.21-v8+ #1642)
20230701 094659 worker: Procarch  (aarch64, 64-bit)
20230701 094659 worker: MPD ver   (0.23.12)
20230701 094659 worker: CPU gov   (ondemand)
20230701 094659 worker: Userid    (muldert)
20230701 094659 worker: Homedir   (/home/muldert)
20230701 094659 worker: Timezone  (Africa/Johannesburg)
20230701 094659 worker: Keyboard  (us)
20230701 094659 worker: USB boot  (not enabled yet)
20230701 094659 worker: File sys  (expanded)
20230701 094659 worker: HDMI port (Off)
20230701 094659 worker: Sys LED0  (On)
20230701 094659 worker: Sys LED1  (On)
20230701 094659 worker: --
20230701 094659 worker: -- Network
20230701 094659 worker: --
20230701 094659 worker: eth0 adapter exists
20230701 094659 worker: eth0 address check (Off)
20230701 094659 worker: IP addr (192.168.1.20)
20230701 094659 worker: Netmask (255.255.255.0)
20230701 094659 worker: Gateway (192.168.1.1)
20230701 094659 worker: Pri DNS (192.168.1.1)
20230701 094659 worker: Domain  ()
20230701 094659 worker: wlan0 adapter exists
20230701 094659 worker: wlan0 country (US)
20230701 094659 worker: wlan0 configured SSID (None (activates AP mode))
20230701 094659 worker: wlan0 SSID alternates (None)
20230701 094659 worker: wlan0 router mode (On)
20230701 094659 worker: wlan0 address not assigned
20230701 094659 worker: wlan0 activating AP mode
20230701 094702 worker: wlan0 address check (up to 90 secs)
20230701 094702 worker: wlan0 check 1 for IP address
20230701 094704 worker: wlan0 check 2 for IP address
20230701 094706 worker: wlan0 check 3 for IP address
20230701 094708 worker: wlan0 AP mode activated (SSID Moode)
20230701 094709 worker: wlan0 Router mode activated
20230701 094709 worker: wlan0 power save (Disabled)
20230701 094709 worker: IP addr (172.24.1.1)
20230701 094709 worker: Netmask (255.255.255.0)
20230701 094709 worker: Gateway (192.168.1.1)
20230701 094709 worker: Pri DNS (127.0.0.1)
20230701 094709 worker: Domain  ()
20230701 094709 worker: --
20230701 094709 worker: -- Software update
20230701 094709 worker: --
20230701 094709 worker: Automatic check (Off)
20230701 094709 worker: --
20230701 094709 worker: -- Audio config
20230701 094709 worker: --
20230701 094725 worker: MPD conf updated
20230701 094725 worker: ALSA card number (0)
20230701 094725 worker: MPD audio output (Allo Piano 2.1 Hi-Fi DAC)
20230701 094725 worker: Audio formats (S16_LE, S24_LE, S32_LE)
20230701 094725 worker: ALSA mixer name (Master)
20230701 094725 worker: MPD mixer type (hardware)
20230701 094725 worker: Hdwr volume controller exists
20230701 094725 worker: Max ALSA volume (100%)
20230701 094725 worker: ALSA output mode (Default: plughw)
20230701 094725 worker: ALSA loopback (Off)
20230701 094725 worker: Piano 2.1 output mode (Dual-Stereo)
20230701 094730 worker: Piano 2.1 initialized
20230701 094730 worker: Reset renderer active flags
20230701 094730 worker: CamillaDSP configuration (off)
20230701 094730 worker: CamillaDSP volume sync   (Off)
20230701 094730 worker: CamillaDSP volume range  (60 dB)
20230701 094730 worker: --
20230701 094730 worker: -- File sharing
20230701 094730 worker: --
20230701 094730 worker: SMB file sharing (Off)
20230701 094730 worker: NFS file sharing (Off)
20230701 094730 worker: --
20230701 094730 worker: -- MPD startup
20230701 094730 worker: --
20230701 094731 worker: MPD started
20230701 094731 worker: MPD accepting connections
20230701 094731 worker: MPD output 1 ALSA Default (On)
20230701 094731 worker: MPD output 2 ALSA Bluetooth (Off)
20230701 094731 worker: MPD output 3 HTTP Server (Off)
20230701 094731 worker: MPD crossfade (off)
20230701 094731 worker: MPD ignore CUE files (yes)
20230701 094731 worker: Default playlist loaded for first boot
20230701 094731 worker: --
20230701 094731 worker: -- Music sources
20230701 094731 worker: --
20230701 094731 worker: USB sources
20230701 094731 worker: No drives found
20230701 094731 worker: NAS sources
20230701 094731 worker: None configured
20230701 094731 worker: --
20230701 094731 worker: -- Feature availability
20230701 094731 worker: --
20230701 094731 worker: Input select (available)
20230701 094731 worker: Input (MPD)
20230701 094731 worker: Output (Allo Piano 2.1 Hi-Fi DAC)
20230701 094731 worker: Bluetooth (available)
20230701 094732 worker: AirPlay renderer (available)
20230701 094732 worker: Spotify renderer (available)
20230701 094732 worker: Squeezelite (available)
20230701 094732 worker: RoonBridge renderer (not installed)
20230701 094732 worker: Multiroom sender (available)
20230701 094732 worker: Multiroom receiver (available)
20230701 094732 worker: UPnP renderer (available)
20230701 094732 worker: DLNA server (available)
20230701 094732 worker: GPIO button handler (available)
20230701 094732 worker: Stream recorder (available: not installed)
20230701 094732 worker: HTTPS-Only mode (n/a)
20230701 094732 worker: --
20230701 094732 worker: -- Other
20230701 094732 worker: --
20230701 094732 worker: USB volume knob (Off)
20230701 094732 worker: Shellinabox SSH started
20230701 094732 worker: USB auto-mounter (udisks-glue)
20230701 094732 worker: Saved MPD vol level (0)
20230701 094732 worker: Preamp volume level (0)
20230701 094732 worker: MPD volume level (0) restored
20230701 094732 worker: ALSA Master volume (0%)
20230701 094732 worker: Auto-play (Off)
20230701 094733 worker: LocalUI (Off)
20230701 094733 worker: Automatic CoverView (Off)
20230701 094733 worker: On-screen keyboard (Off)
20230701 094733 worker: Library scope (all)
20230701 094733 worker: View reset to playback
20230701 094733 worker: Maintenance interval (360 minutes)
20230701 094733 worker: Screen saver activation (Never)
20230701 094733 worker: Session permissions (OK)
20230701 094733 worker: --
20230701 094733 worker: -- Startup complete
20230701 094733 worker: --
20230701 094733 worker: Mount monitor (off)
20230701 094733 worker: Watchdog monitor (started)
20230701 094733 worker: Ready
20230701 094737 enhanceMetadata(): error: currentsong file is NULL
20230701 094741 enhanceMetadata(): error: currentsong file is NULL
20230701 094811 waitWorker(): Start (snd-config, w_active=0)
20230701 094811 waitWorker(): End   (snd-config, w_active=0)
20230701 094812 enhanceMetadata(): error: currentsong file is NULL
20230701 094913 waitWorker(): Start (mpd-config, w_active=0)
20230701 094913 waitWorker(): End   (mpd-config, w_active=0)
20230701 094914 enhanceMetadata(): error: currentsong file is NULL
20230701 095128 phpSession(get_status): status=PHP_SESSION_NONE
20230701 095128 waitWorker(): Start (mpd-config, w_active=1)
20230701 095129 waitWorker(): Wait  (1)
20230701 095130 waitWorker(): Wait  (2)
20230701 095130 enhanceMetadata(): error: currentsong file is NULL
20230701 095130 worker: Job mpdcfg
20230701 095131 waitWorker(): Wait  (3)
20230701 095132 worker: Job mpdcfg: devchg|mixchg (|0), alsavol (0%), playstate (paused)
20230701 095132 waitWorker(): End   (mpd-config, w_active=0)
20230701 095132 enhanceMetadata(): error: currentsong file is NULL
20230701 095132 enhanceMetadata(): error: currentsong file is NULL
20230701 095132 enhanceMetadata(): error: currentsong file is NULL
20230701 095132 enhanceMetadata(): error: currentsong file is NULL
20230701 095132 enhanceMetadata(): error: currentsong file is NULL
20230701 095133 waitWorker(): Start (ren-config, w_active=0)
20230701 095133 waitWorker(): End   (ren-config, w_active=0)
20230701 095147 phpSession(get_status): status=PHP_SESSION_ACTIVE
20230701 095147 waitWorker(): Start (ren-config, w_active=1)
20230701 095147 worker: Job upnpsvc
20230701 095148 waitWorker(): Wait  (1)
20230701 095148 waitWorker(): End   (ren-config, w_active=0)
20230701 095221 phpSession(get_status): status=PHP_SESSION_ACTIVE
20230701 095221 waitWorker(): Start (ren-config, w_active=1)
20230701 095222 waitWorker(): Wait  (1)
20230701 095223 waitWorker(): Wait  (2)
20230701 095223 worker: Job upnpsvc
20230701 095224 waitWorker(): Wait  (3)
20230701 095224 waitWorker(): End   (ren-config, w_active=0)
20230701 095250 phpSession(get_status): status=PHP_SESSION_ACTIVE
20230701 095250 waitWorker(): Start (ren-config, w_active=1)
20230701 095251 waitWorker(): Wait  (1)
20230701 095251 worker: Job upnpsvc
20230701 095252 waitWorker(): Wait  (2)
20230701 095252 waitWorker(): End   (ren-config, w_active=0)
20230701 095316 phpSession(get_status): status=PHP_SESSION_NONE
20230701 095318 worker: Job update_library
20230701 095318 mpdindex: Start
20230701 095318 mpdindex: Cmd (update)
20230701 095319 thumb-gen: Start
20230701 095319 thumb-gen: Scan opt: Default
20230701 095319 thumb-gen: Priority: Embedded cover
20230701 095319 thumb-gen: Res,Qual: Auto
20230701 095319 thumb-gen: Px ratio: 1
20230701 095319 thumb-gen: Th width: 100
20230701 095319 thumb-gen: Thm qual: 75
20230701 095319 thumb-gen: Scanning: NAS, SDCARD
20230701 095319 thumb-gen: Done: 1 folders scanned, 0 thumbs created, 1 already in cache.
20230701 095321 mpdindex: Done: indexed 1 artists, 1 albums, 1 songs
20230701 095321 worker: Job update_library done
20230701 095322 genLibrary(): jsonErrorMessage(): No errors
20230701 095436 waitWorker(): Start (snd-config, w_active=0)
20230701 095436 waitWorker(): End   (snd-config, w_active=0)
20230701 095526 waitWorker(): Start (snd-config, w_active=0)
20230701 095526 waitWorker(): End   (snd-config, w_active=0)
20230701 095546 waitWorker(): Start (snd-config, w_active=0)
20230701 095546 waitWorker(): End   (snd-config, w_active=0)
20230701 095728 waitWorker(): Start (chp-config, w_active=0)
20230701 095728 waitWorker(): End   (chp-config, w_active=0)
20230701 095737 waitWorker(): Start (snd-config, w_active=0)
20230701 095737 waitWorker(): End   (snd-config, w_active=0)
20230701 095742 waitWorker(): Start (mpd-config, w_active=0)
20230701 095742 waitWorker(): End   (mpd-config, w_active=0)
20230701 095756 waitWorker(): Start (net-config, w_active=0)
20230701 095756 waitWorker(): End   (net-config, w_active=0)
20230701 095805 waitWorker(): Start (sys-config, w_active=0)
20230701 095805 waitWorker(): End   (sys-config, w_active=0)
20230701 095838 waitWorker(): Start (lib-config, w_active=0)
20230701 095838 waitWorker(): End   (lib-config, w_active=0)
20230701 095844 phpSession(get_status): status=PHP_SESSION_ACTIVE
20230701 095844 waitWorker(): Start (lib-config, w_active=1)
20230701 095845 waitWorker(): Wait  (1)
20230701 095846 waitWorker(): Wait  (2)
20230701 095847 worker: Job regen_library
20230701 095847 waitWorker(): Wait  (3)
20230701 095847 waitWorker(): End   (lib-config, w_active=0)
20230701 095847 thumb-gen: Start
20230701 095847 thumb-gen: Scan opt: Default
20230701 095847 thumb-gen: Priority: Embedded cover
20230701 095847 thumb-gen: Res,Qual: Auto
20230701 095847 thumb-gen: Px ratio: 1
20230701 095847 thumb-gen: Th width: 100
20230701 095847 thumb-gen: Thm qual: 75
20230701 095847 thumb-gen: Scanning: NAS, SDCARD
20230701 095847 thumb-gen: Done: 1 folders scanned, 0 thumbs created, 1 already in cache.
20230701 095850 worker: Job regen_library done
20230701 095909 waitWorker(): Start (lib-config, w_active=0)
20230701 095909 waitWorker(): End   (lib-config, w_active=0)
20230701 095928 waitWorker(): Start (lib-config, w_active=0)
20230701 095928 waitWorker(): End   (lib-config, w_active=0)
20230701 095939 phpSession(get_status): status=PHP_SESSION_ACTIVE
20230701 095939 waitWorker(): Start (lib-config, w_active=1)
20230701 095940 waitWorker(): Wait  (1)
20230701 095941 waitWorker(): Wait  (2)
20230701 095941 worker: Job regen_thmcache
20230701 095942 thumb-gen: Start
20230701 095942 thumb-gen: Scan opt: Default
20230701 095942 thumb-gen: Priority: Embedded cover
20230701 095942 thumb-gen: Res,Qual: Auto
20230701 095942 thumb-gen: Px ratio: 1
20230701 095942 thumb-gen: Th width: 100
20230701 095942 thumb-gen: Thm qual: 75
20230701 095942 thumb-gen: Scanning: NAS, SDCARD
20230701 095942 thumb-gen: Done: 1 folders scanned, 1 thumbs created, 0 already in cache.
20230701 095942 waitWorker(): Wait  (3)
20230701 095942 waitWorker(): End   (lib-config, w_active=0)
20230701 095953 genLibrary(): jsonErrorMessage(): No errors
20230701 100054 waitWorker(): Start (cdsp-config, w_active=0)
20230701 100054 waitWorker(): End   (cdsp-config, w_active=0)
20230701 100141 waitWorker(): Start (trx-config, w_active=0)
20230701 100141 waitWorker(): End   (trx-config, w_active=0)
20230701 100159 waitWorker(): Start (inp-config, w_active=0)
20230701 100159 waitWorker(): End   (inp-config, w_active=0)
20230701 100243 waitWorker(): Start (sys-config, w_active=0)
20230701 100243 waitWorker(): End   (sys-config, w_active=0)
Find
Reply
Theunis Mulder Offline
Junior Member
*
Posts: 12
Threads: 3
Joined: Oct 2021
Reputation: 0
#5
07-01-2023, 08:47 AM
(07-01-2023, 05:56 AM)Theunis Mulder Wrote: Good day Tim

I will try an get hold of a different brand micro SD card and will revert back on my findings

When i install Roon Bridge i have use the below and SSH from Moode in build app - not sure if I should have used Roon Bridge armv7hf instead of armv8.

Should i change the directory where I install Roon Bridge as a renderer on Moode or can I just run these three below scripts directly, without changing directory where to install.

Notice that original possible faulty micro SD card had none of the original files on - it was as if it was empty after I removed it from PI. That is possibly why I was not able to connect to PI-3B.



Roon Bridge armv8

$ curl -O https://download.roonlabs.net/builds/roo...uxarmv8.sh
$ chmod +x roonbridge-installer-linuxarmv8.sh
$ sudo ./roonbridge-installer-linuxarmv8.sh
Find
Reply
Tim Curtis Online
moOde audio founder
******
Posts: 13,445
Threads: 305
Joined: Mar 2018
Reputation: 545
#6
07-01-2023, 11:22 AM
As far as specifics regarding installing RoonBridge, thats a question for Root tech support.

I tested it a couple of years ago when I included it in moOde's Renderer feature and IIRC I just followed whatever instructions were on their website.

Use their armv8 installer for 64bit moOde and the arm7hf installer for 32bit moOde.
Enjoy the Music!
moodeaudio.org | Mastodon Feed | GitHub
Website Find
Reply
Theunis Mulder Offline
Junior Member
*
Posts: 12
Threads: 3
Joined: Oct 2021
Reputation: 0
#7
07-01-2023, 05:38 PM
(07-01-2023, 11:22 AM)Tim Curtis Wrote: As far as specifics regarding installing RoonBridge, thats a question for Root tech support.

I tested it a couple of years ago when I included it in moOde's Renderer feature and IIRC I just followed whatever instructions were on their website.

Use their armv8 installer for 64bit moOde and the arm7hf installer for 32bit moOde.

Hi Tim

I think I found the problem.

On the old card that was giving me problems  - I tried a new image Moode  installation. That I know is working fine
I then SSH from  Moode and expand SD card to maximum width with(sudo rasbipi-config)
I then use the three scripts for roon  bridge web page and installed roon bridge. 
To be seen as an endpoint by Roon.

I was not able to install roon bridge armv7hf, it indicated that PI 3B need the roon bridge armv8.
Installed arm 8 and reboot and restarted Moode a few times - no issues.
I am currently running PI 3B with Kali and Allo Piano DAC 2.1 AS an endpoint in roon.

Happy Moode customer.
Find
Reply
Nutul Offline
Senior Member+
*
Posts: 1,282
Threads: 24
Joined: Jun 2022
Reputation: 42
#8
07-01-2023, 07:55 PM
(07-01-2023, 05:38 PM)Theunis Mulder Wrote: I am currently running PI 3B with Kali and Allo Piano DAC 2.1 AS an endpoint in roon.

Excellent! :-)
Cheers, Al.

https://groovesetter.net

Find
Reply


Forum Jump: