moodeaudio.org > Moode Forum › moOde audio player › Support v
No sound on RPi4 + USB DAC

Thank you for your donation!


Cloudsmith graciously provides open-source package management and distribution for our project.


Thread Modes
No sound on RPi4 + USB DAC
tinca Offline
Junior Member
*
Posts: 6
Threads: 2
Joined: Sep 2023
Reputation: 0
#1
09-23-2023, 02:33 PM
This my first encounter with moode, I used Libreelec for my  general media playing purposes until now.
To be able experiment with the various options I use PINN to create bootable environment.
So moode has been installed that way, a 8.0.x version is running.
The problem, that whatever configuration I try no sound is outputted. The Output Device is recognized, tried every available Volume Types.
Name I2S Device/DT Overlay is 'none'. Tried both Output ModeS. All are to no avail.

I run out of ideas what else I can try, so here I am for asking advice.

Thanks.
RPi 4B, SMSL SU-1 DAC, Dayens Menuetto amp, Monitor Audio Bronze 2
Find
Reply
Tim Curtis Offline
moOde audio founder
******
Posts: 13,396
Threads: 304
Joined: Mar 2018
Reputation: 543
#2
09-23-2023, 03:00 PM
Your nest bet is to install the latest version of moOde on a dedicated uSD card using the official Raspberry Pi Imager. Refer to the "SECURITY AND OPERATING SYSTEM (OS) IMAGE" section of the Setup guide for info.
https://github.com/moode-player/moode/bl.../setup.txt
Enjoy the Music!
moodeaudio.org | Mastodon Feed | GitHub
Website Find
Reply
tinca Offline
Junior Member
*
Posts: 6
Threads: 2
Joined: Sep 2023
Reputation: 0
#3
09-23-2023, 05:56 PM
(09-23-2023, 03:00 PM)Tim Curtis Wrote: Your nest bet is to install the latest version of moOde on a dedicated uSD card using the official Raspberry Pi Imager. Refer to the "SECURITY AND OPERATING SYSTEM (OS) IMAGE" section of the Setup guide for info.
https://github.com/moode-player/moode/bl.../setup.txt

Yes, I am following that doc. While I do not expect PINN to have an effect on the result of installation, I will try a separate install with the newest version available, and that will hopefully do have.

Thanks.
RPi 4B, SMSL SU-1 DAC, Dayens Menuetto amp, Monitor Audio Bronze 2
Find
Reply
tinca Offline
Junior Member
*
Posts: 6
Threads: 2
Joined: Sep 2023
Reputation: 0
#4
09-23-2023, 08:02 PM
Persistence pays off :-)
I kept updating from within moode (so nice to have this feature!) until at 8.2.0 the sound has arrived!
Now it's gonna be a matter of patience to get to the latest.
RPi 4B, SMSL SU-1 DAC, Dayens Menuetto amp, Monitor Audio Bronze 2
Find
Reply
tinca Offline
Junior Member
*
Posts: 6
Threads: 2
Joined: Sep 2023
Reputation: 0
#5
09-23-2023, 08:39 PM (This post was last modified: 09-23-2023, 10:34 PM by DRONE7. Edit Reason: https://moodeaudio.org/forum/showthread.php?tid=4654 )
Hm. Updated to 8.3.6 and now no sound again.
The moodeutl -l output contains nothing suspicious for me:


Code:
20230923 221447 worker: --
20230923 221447 worker: -- Start moOde 8 series
20230923 221447 worker: --
20230923 221447 worker: Successfully daemonized
20230923 221447 worker: Waiting for Linux startup...
20230923 221459 worker: Linux startup complete
20230923 221459 worker: Boot config backed up
20230923 221504 worker: File check (OK)
20230923 221505 worker: Session vacuumed
20230923 221505 worker: Session loaded
20230923 221505 worker: Debug logging (OFF)
20230923 221505 worker: Reduced system logging (OFF)
20230923 221505 worker: --
20230923 221505 worker: -- Audio debug
20230923 221505 worker: --
20230923 221505 worker: ALSA cards: (0:b1 | 1:Headphones | 2:AUDIO | 3:empty
20230923 221505 worker: MPD config: (2:SMSL USB AUDIO | mixer:(PCM) | card:2)
20230923 221505 worker: ALSA mixer actual (none)
20230923 221505 worker: ALSA volume (none)
20230923 221505 worker: --
20230923 221505 worker: -- System
20230923 221505 worker: --
20230923 221506 worker: Host      (moode)
20230923 221506 worker: Hardware  (Pi-4B 1.5 4GB)
20230923 221506 worker: moOde     (8.3.6 2023-09-05)
20230923 221506 worker: RaspiOS   (11.2)
20230923 221506 worker: Kernel    (6.1.21-v8+ #1642)
20230923 221506 worker: Procarch  (aarch64, 64-bit)
20230923 221506 worker: MPD ver   (0.23.12)
20230923 221506 worker: CPU gov   (ondemand)
20230923 221506 worker: Userid    (pi)
20230923 221506 worker: Homedir   (/home/pi)
20230923 221506 worker: Timezone  (Europe/Budapest)
20230923 221506 worker: Keyboard  (us)
20230923 221506 worker: USB boot  (enabled)
20230923 221506 worker: File sys  (not expanded)
20230923 221506 worker: HDMI port (On)
20230923 221507 worker: Sys LED0  (On)
20230923 221507 worker: Sys LED1  (On)
20230923 221507 worker: --
20230923 221507 worker: -- Network
20230923 221507 worker: --
20230923 221507 worker: WARNING: WiFi SSID/PSK import failed
20230923 221507 worker: eth0 adapter exists
20230923 221507 worker: eth0 address check (Off)
20230923 221507 worker: IP addr (192.168.0.12)
20230923 221507 worker: Netmask (255.255.255.0)
20230923 221507 worker: Gateway (192.168.0.1)
20230923 221507 worker: Pri DNS (192.168.0.1)
20230923 221507 worker: Domain  (home)
20230923 221507 worker: wlan0 adapter exists
20230923 221507 worker: wlan0 country (US)
20230923 221507 worker: wlan0 configured SSID (None (activates AP mode))
20230923 221507 worker: wlan0 SSID alternates (None)
20230923 221507 worker: wlan0 router mode (Off)
20230923 221507 worker: wlan0 address not assigned
20230923 221507 worker: wlan0 AP mode not activated, eth0 active but Router mode is Off
20230923 221507 worker: wlan0 address not assigned
20230923 221507 worker: --
20230923 221507 worker: -- Software update
20230923 221507 worker: --
20230923 221507 worker: Automatic check (Off)
20230923 221507 worker: --
20230923 221507 worker: -- File sharing
20230923 221507 worker: --
20230923 221507 worker: SMB file sharing (Off)
20230923 221507 worker: NFS file sharing (Off)
20230923 221507 worker: --
20230923 221507 worker: -- Audio config
20230923 221507 worker: --
20230923 221511 worker: MPD conf updated (USB device + In-place update)
20230923 221511 worker: ALSA card number (2)
20230923 221511 worker: MPD audio output (SMSL USB AUDIO)
20230923 221511 worker: Audio formats (S32_LE, SPECIAL, DSD_U32_BE)
20230923 221511 worker: ALSA mixer name (none)
20230923 221511 worker: MPD mixer type (software)
20230923 221511 worker: Hdwr volume controller not detected
20230923 221511 worker: ALSA output mode (Default)
20230923 221511 worker: ALSA loopback (Off)
20230923 221511 worker: Renderer active flags (reset)
20230923 221511 worker: CamillaDSP configuration (off)
20230923 221511 worker: --
20230923 221511 worker: -- MPD startup
20230923 221511 worker: --
20230923 221512 worker: MPD started
20230923 221512 worker: MPD accepting connections
20230923 221512 worker: MPD output 1 ALSA Default (On)
20230923 221512 worker: MPD output 2 ALSA Bluetooth (Off)
20230923 221512 worker: MPD output 3 HTTP Server (Off)
20230923 221512 worker: MPD crossfade (off)
20230923 221512 worker: MPD ignore CUE files (yes)
20230923 221512 worker: MPD camilladsp volume sync (Off)
20230923 221512 worker: MPD camilladsp volume range (60 dB)
20230923 221512 worker: --
20230923 221512 worker: -- Music sources
20230923 221512 worker: --
20230923 221512 worker: USB sources
20230923 221512 worker: boot0
20230923 221512 worker: EFI
20230923 221512 worker: mymusic
20230923 221512 worker: RECOVERY
20230923 221512 worker: root0
20230923 221512 worker: SETTINGS
20230923 221512 worker: Storage
20230923 221512 worker: System
20230923 221512 worker: NAS sources
20230923 221512 worker: None configured
20230923 221512 worker: --
20230923 221512 worker: -- Feature availability
20230923 221512 worker: --
20230923 221512 worker: Input select (available)
20230923 221512 worker: Input (MPD)
20230923 221512 worker: Output (SMSL USB AUDIO)
20230923 221512 worker: Bluetooth (available)
20230923 221512 worker: AirPlay renderer (available: started)
20230923 221512 worker: Spotify renderer (available)
20230923 221512 worker: Squeezelite (available)
20230923 221512 worker: RoonBridge renderer (not installed)
20230923 221512 worker: Multiroom sender (available)
20230923 221512 worker: Multiroom receiver (available)
20230923 221512 worker: UPnP renderer (available)
20230923 221512 worker: DLNA server (available)
20230923 221512 worker: GPIO button handler (available)
20230923 221512 worker: Stream recorder (n/a)
20230923 221512 worker: HTTPS-Only mode (n/a)
20230923 221512 worker: --
20230923 221512 worker: -- Other
20230923 221512 worker: --
20230923 221512 worker: USB volume knob (Off)
20230923 221512 worker: Shellinabox SSH started
20230923 221512 worker: USB auto-mounter (udisks-glue)
20230923 221512 worker: Saved MPD vol level (0)
20230923 221512 worker: Preamp volume level (0)
20230923 221512 worker: MPD volume level (70) restored
20230923 221512 worker: ALSA volume level (None)
20230923 221512 worker: Auto-play (Off)
20230923 221603 worker: LocalUI (Off)
20230923 221603 worker: Automatic CoverView (Off)
20230923 221603 worker: On-screen keyboard (Off)
20230923 221603 worker: Library scope (all)
20230923 221603 worker: Library active search (None)
20230923 221603 worker: View reset to (Playback)
20230923 221603 worker: Maintenance interval (360 minutes)
20230923 221603 worker: Screen saver activation (Never)
20230923 221603 worker: Session permissions (OK)
20230923 221603 worker: --
20230923 221603 worker: -- Startup complete
20230923 221603 worker: --
20230923 221603 worker: Mount monitor (off)
20230923 221603 worker: Watchdog monitor (started)
20230923 221603 worker: Responsiveness (Default)
20230923 221603 worker: Ready
20230923 222042 worker: Job alsa_output_mode
20230923 222128 worker: Job updater_auto_check
20230923 222128 worker: Automatic check (On)
20230923 222128 worker: Checking for available update...
20230923 222144 worker: Software is up to date



Will try with debug logging.
RPi 4B, SMSL SU-1 DAC, Dayens Menuetto amp, Monitor Audio Bronze 2
Find
Reply
Nutul Offline
Senior Member+
*
Posts: 1,274
Threads: 24
Joined: Jun 2022
Reputation: 42
#6
09-23-2023, 10:01 PM
(09-23-2023, 08:39 PM)tinca Wrote: (...)
20230923 221512 worker: Saved MPD vol level (0)
20230923 221512 worker: Preamp volume level (0)
20230923 221512 worker: MPD volume level (70) restored
20230923 221512 worker: ALSA volume level (None)

Hi,

I don't know if this is relevant, but in my log it writes "0" instead of "70" (weird, though)
Sorry for the silly question... I'm not familiar with the SMSL SU-1 but, is your DAC configured to play what's incoming on the USB input?
Cheers, Al.

https://groovesetter.net

Find
Reply
tinca Offline
Junior Member
*
Posts: 6
Threads: 2
Joined: Sep 2023
Reputation: 0
#7
09-24-2023, 07:33 AM
(09-23-2023, 10:01 PM)Nutul Wrote:
(09-23-2023, 08:39 PM)tinca Wrote: (...)
20230923 221512 worker: Saved MPD vol level (0)
20230923 221512 worker: Preamp volume level (0)
20230923 221512 worker: MPD volume level (70) restored
20230923 221512 worker: ALSA volume level (None)

Hi,

I don't know if this is relevant, but in my log it writes "0" instead of "70" (weird, though)
Sorry for the silly question... I'm not familiar with the SMSL SU-1 but, is your DAC configured to play what's incoming on the USB input?

I just tried that knob when got sound with 8.2.0. It did have an effect.
And yes, the USB input is selected on the DAC.

Thanks!
RPi 4B, SMSL SU-1 DAC, Dayens Menuetto amp, Monitor Audio Bronze 2
Find
Reply
philrandal Offline
Member
*
Posts: 245
Threads: 15
Joined: Apr 2018
Reputation: 9
#8
09-25-2023, 07:44 AM (This post was last modified: 09-25-2023, 07:46 AM by philrandal.)
I had this after in-place updating to the latest Moode.

Configure / Audio

Go down to ALSA Options and click "save" next to the ALSA volume level.

In my case, suddenly sound emanated from my speakers.

Phil

Find
Reply


Forum Jump: