Heelo, A few questions.

[MONTY]

I'm attempting to make a Pi 4 and 3.5 screen into a bit of a jukebox above my stereo system

I have all my music on a USB drive plugged in. I have run REFRESH a few times but I can't seem to see any list of the music.

How do I make it connect to Bluetooth on start up. Or when I start the BT receiver on my Stereo 

Can I add Radio Stations ? 

Thank you

[Tim Curtis]

- After plugging in the USB driver do Menu, Update library

- Menu, Configure, Renderers and then turn on Bluetooth and the Pairing Agent.
- Are you connecting to moOde from your phone or are you connecting moOde to a Bluetooth speaker?

Switch to Library, Radio and then click the +

[MONTY]

- After plugging in the USB driver do Menu, Update library

- Menu, Configure, Renderers and then turn on Bluetooth and the Pairing Agent.
- Are you connecting to moOde from your phone or are you connecting moOde to a Bluetooth speaker?

Switch to Library, Radio and then click the +

I have ran Update Library quite a few times with no results.

The BT doesn't seem to remember to log into to BT on my Stereo and now when I click 'Connect after picking it from 'trusted Devices' it doesn't connect at all 


I'm connecting my Pi mo0de to my Stereo amp which has a BT receiver  

Thanks

[Tim Curtis]

Reboot and then post the contents of the startup log.

The log can be viewed via the SSH command moodeutl -l or downloaded via the Logs section in System Config, or via Menu, System info from the any of the Config screens. The startup log will be at the end of System info output.

[MONTY]

mmm OK I'll try Can I get them through the browser interface ?

[MONTY]

20240111 220145 worker: --
20240111 220145 worker: -- Start moOde 8 series
20240111 220145 worker: --
20240111 220145 worker: Successfully daemonized
20240111 220145 worker: Wait for Linux startup...
20240111 220157 worker: Linux startup complete
20240111 220157 worker: Boot config backed up
20240111 220158 worker: Session loaded
20240111 220200 worker: Package holds applied
20240111 220201 worker: File check complete
20240111 220201 worker: Debug logging off
20240111 220201 worker: Reduced logging off
20240111 220201 worker: --
20240111 220201 worker: -- Audio debug
20240111 220201 worker: --
20240111 220201 worker: ALSA cards:  0:Headphones | 1:empty | 2:empty | 3:empty
20240111 220201 worker: MPD config:  0i Headphone jack | mixerCM | cardnum:0
20240111 220201 worker: Mixer name:  [PCM]
20240111 220201 worker: Hdwr volume: set to 0%
20240111 220201 worker: --
20240111 220201 worker: -- System
20240111 220201 worker: --
20240111 220203 worker: Host:     bigpi
20240111 220203 worker: Model:    Pi-4B 1.5 2GB
20240111 220203 worker: moOde:    8.3.7 2023-12-07
20240111 220203 worker: RaspiOS:  11.8 Bullseye 64-bit
20240111 220203 worker: Kernel:   6.1.21 64-bit
20240111 220203 worker: MPD ver:  0.23.14
20240111 220203 worker: CPU gov:  ondemand
20240111 220203 worker: Userid:   bigpi
20240111 220203 worker: Homedir:  /home/bigpi
20240111 220203 worker: Timezone: Europe/London
20240111 220203 worker: Keyboard: gb
20240111 220203 worker: USB boot: enabled
20240111 220203 worker: File sys: expanded
20240111 220203 worker: HDMI out: on
20240111 220203 worker: Sys LED0: on
20240111 220203 worker: Sys LED1: on
20240111 220203 worker: --
20240111 220203 worker: -- Network
20240111 220203 worker: --
20240111 220203 worker: Eth: adapter exists
20240111 220203 worker: Eth: timeout off
20240111 220203 worker: Eth: address not assigned
20240111 220203 worker: Wlan: adapter exists
20240111 220203 worker: Wlan: country US
20240111 220203 worker: Wlan: SSID    UNIMATRIX14
20240111 220203 worker: Wlan: other   none
20240111 220203 worker: Wlan: router  off
20240111 220203 worker: Wlan: timeout up to 90 secs
20240111 220203 worker: Wlan: connect to UNIMATRIX14
20240111 220203 worker: Wlan: sleep   disabled
20240111 220203 worker: Wlan: method  dhcp
20240111 220203 worker: Wlan: address 192.168.0.186
20240111 220203 worker: Wlan: netmask 255.255.255.0
20240111 220203 worker: Wlan: gateway 192.168.0.1
20240111 220203 worker: Wlan: pri DNS 192.168.0.1
20240111 220203 worker: Wlan: domain  
20240111 220203 worker: --
20240111 220203 worker: -- Software update
20240111 220203 worker: --
20240111 220203 worker: Automatic check off
20240111 220203 worker: --
20240111 220203 worker: -- File sharing
20240111 220203 worker: --
20240111 220204 worker: SMB file sharing:  on
20240111 220204 worker: NFS file sharing:  off
20240111 220204 worker: DLNA file sharing: off
20240111 220204 worker: --
20240111 220204 worker: -- Audio config
20240111 220204 worker: --
20240111 220204 worker: MPD config:    updated
20240111 220204 worker: Audio device:  Pi Headphone jack
20240111 220204 worker: Formats:       U8, S16_LE
20240111 220204 worker: Mixer type     Software
20240111 220204 worker: Mixer name     PCM
20240111 220204 worker: Hdwr volume:   controller detected
20240111 220204 worker: ALSA max vol:  100%
20240111 220204 worker: ALSA card:     0
20240111 220204 worker: ALSA mode:     Default
20240111 220204 worker: ALSA loopback: off
20240111 220204 worker: CamillaDSP:    off
20240111 220204 worker: Renderers:     active flags reset
20240111 220204 worker: --
20240111 220204 worker: -- MPD startup
20240111 220204 worker: --
20240111 220205 worker: MPD service:        started
20240111 220205 worker: MPD port 6600:      accepting connections
20240111 220205 worker: MPD ALSA Default:   off
20240111 220205 worker: MPD ALSA Bluetooth: on
20240111 220205 worker: MPD HTTP Server:    off
20240111 220205 worker: MPD crossfade:      off
20240111 220205 worker: MPD ignore CUE:     yes
20240111 220205 worker: MPD CDSP volsync:   off
20240111 220205 worker: MPD CDSP volrange:  60 dB
20240111 220205 worker: --
20240111 220205 worker: -- Music sources
20240111 220205 worker: --
20240111 220205 worker: USB auto-mount: udisks-glue
20240111 220205 worker: USB drive:      JUKEBOX
20240111 220205 worker: NAS sources:    no music sources defined
20240111 220205 worker: --
20240111 220205 worker: -- Feature availability
20240111 220205 worker: --
20240111 220205 worker: Input select:    available, src MPD, out Pi Headphone jack
20240111 220213 worker: Bluetooth:       started, PA started, ALSA mode Default
20240111 220213 worker: AirPlay:         available
20240111 220213 worker: Spotify Connect: available
20240111 220213 worker: Squeezelite:     available
20240111 220213 worker: RoonBridge:      not installed
20240111 220213 worker: Multiroom:       available
20240111 220213 worker: UPnP client:     available
20240111 220213 worker: GPIO buttons:    available
20240111 220213 worker: Stream recorder: n/a
20240111 220213 worker: HTTPS-Only mode: n/a
20240111 220213 worker: --
20240111 220213 worker: -- Volume levels
20240111 220213 worker: --
20240111 220213 worker: Volume knob:      65
20240111 220213 worker: Saved MPD volume: 0
20240111 220213 worker: Saved SRC volume: 0
20240111 220213 worker: Hdwr volume:      100%
20240111 220213 worker: --
20240111 220213 worker: -- Peripherals
20240111 220213 worker: --
20240112 183052 worker: Local display:   on
20240112 183052 worker: On-screen kbd:   off
20240112 183052 worker: Rotary encoder:  off
20240112 183052 worker: USB volume knob: off
20240112 183052 worker: LCD updater:     off
20240112 183052 worker: --
20240112 183052 worker: -- Miscellaneous
20240112 183052 worker: --
20240112 183052 worker: Auto-CoverView:    off
20240112 183052 worker: CoverView timeout: Never
20240112 183052 worker: Auto-shuffle:      off
20240112 183052 worker: Auto-play:         off
20240112 183052 worker: Web SSH server:    off
20240112 183052 worker: Maintenance task:  360 mins
20240112 183052 worker: Current view:      reset to Playback
20240112 183052 worker: Session check:     ok
20240112 183052 worker: --
20240112 183052 worker: -- Startup complete 
20240112 183052 worker: --
20240112 183052 worker: Mount monitor:    off
20240112 183052 worker: MPD monitor:      off
20240112 183052 worker: Watchdog monitor: started
20240112 183052 worker: Responsiveness:   Default
20240112 183052 worker: Ready
20240112 183249 worker: Job shellinabox

[Tim Curtis]

I don't see anything suspicious in the log.

1. When you mentioned that there are no results after "Update library", which moOde screen are you referring to that shows no tracks?

2. Your Receiver prolly has to be in Bluetooth scan mode in order for a client to connect. What make/model receiver are you using?

[MONTY]

I have paired the receiver it did work , it won't pair now even though its in the trusted list

i cant see how to change screen mode 

I cant attach an image as the forum doesnt allow files big enough :

[MONTY]

[Tim Curtis]

Menu, Quick help explains how to navigate the WebUI

What make/model receiver are u using?