I made some mess...

[Venerdi]

Hi everyone,
during the last update (to version 8.39), I made such a mess (started with Camilla ), that I was forced to do a new clean install. Unfortunately the backup files were not useful, because they gave errors especially with Camilla, and therefore I had to reconfigure everything in moOde from scratch. There are two things I can't remember how to fix, and they involve display.
1) I don't remember how the screens sync. If I have the moOde screen open on the PC and on the TV at the same time, if I make a change on one of the two, the other remains on the old screen.
2) After reinstalling 8.39 from scratch, I now see a smaller image on the TV with black sidebars and a lot of empty space at the bottom.
These two things didn't happen before.
I remember reading posts about this, but I can't find them.
Thank you
v.

[DRONE7]

2 things
M>Refresh
this may refresh your browser and sync the attached screens.
Clear your Browser Cache (Whatever browser you use)

[Venerdi]

2 things
M>Refresh
this may refresh your browser and sync the attached screens.
Clear your Browser Cache (Whatever browser you use)

Thanks Bob, but I probably didn't phrase my questions well.

V.

[muddiver]

Hi Venerdi,

i'm not quiete sure if you still have problems, but you should look at the Documentation
https://github.com/stweil/raspberrypi-do...fig-txt.md
to apply changes to the /boot/config.txt
I had to insert 3 lines to my config .txt to make my display work properly.

hdmi_group=2
hdmi_mode=87
hdmi_cvt=1024 600 60 6 0 0 0

Greets, Tom

[Venerdi]

Hi Venerdi,

i'm not quiete sure if you still have problems, but you should look at the Documentation
https://github.com/stweil/raspberrypi-do...fig-txt.md
to apply changes to the /boot/config.txt
I had to insert 3 lines to my config .txt to make my display work properly.

hdmi_group=2
hdmi_mode=87
hdmi_cvt=1024 600 60 6 0 0 0

Greets, Tom

This is interesting. I have to study it a bit and do some tests.

Tom, thank you very much for the suggestion  
v.