Posts: 30
Threads: 4
Joined: Apr 2020
Reputation:
0
04-05-2024, 11:12 AM
(This post was last modified: 04-05-2024, 11:19 AM by PeterLustig33.)
Hello everyone,
After a long time I'm trying to finish a completely new system with PeppyMeter.
But I can't get the PeppyMeter to run. Here are the facts:
- I am using a Raspi4 with the current ModeAudio version 8.3.9
- I have connected a 7 inch display via HDMI. The display works and shows the MoodAudio information.
- I am currently using an external USB Dac with amplifier as a DAC.
- The PeppyAlsa runs without errors
/home/pi/peppyalsa/src/peppyalsa-client /var/tmp/peppyfifo
- The PeppyMeter installation has run without errors.
- Starting with (cd /home/pi/PeppyMeter | sudo python3 peppymeter.py) does not work.
Code: pygame 1.9.6
Hello from the pygame community. https://www.pygame.org/contribute.html
libpng warning: iCCP: known incorrect sRGB profile
- But I don't think that's the problem.
- The display goes black, nothing else happens
- The config.txt file returns this result:
Code: [current]
meter = random
random.meter.interval = 20
base.folder =
meter.folder = 800x480
screen.width = 1024
screen.height = 600
exit.on.touch = False
stop.display.on.touch = False
output.display = True
output.serial = False
output.i2c = False
output.pwm = False
output.http = False
use.logging = False
use.cache = True
frame.rate = 30
[sdl.env]
framebuffer.device = /dev/fb0
mouse.device = /dev/input/event0
mouse.driver = TSLIB
mouse.enabled = True
video.driver = dummy
video.display = :0
double.buffer = False
no.frame = False
[serial.interface]
device.name = /dev/serial0
baud.rate = 9600
include.time = False
update.period = 0.1
[i2c.interface]
port = 1
left.channel.address = 0x21
right.channel.address = 0x20
output.size = 10
update.period = 0.1
[pwm.interface]
frequency = 500
gpio.pin.left = 24
gpio.pin.right = 25
update.period = 0.1
[http.interface]
target.url = http://localhost:8000/vumeter
update.period = 0.033
[web.server]
http.port = 8001
[data.source]
type = pipe
polling.interval = 0.04
pipe.name = /var/tmp/peppyfifo
volume.constant = 80.0
volume.min = 0.0
volume.max = 100.0
volume.max.in.pipe = 100.0
step = 6
mono.algorithm = average
stereo.algorithm = new
smooth.buffer.size = 4
What can I do?
Can anyone help me?
I've spent a few hours googling since yesterday, but haven't found a suitable solution.
best regards
Peter
Posts: 552
Threads: 5
Joined: Mar 2020
Reputation:
30
Hi Peter,
What is your current resolution? Please try these commands:
Code: tvservice -l
tvservice -s -v 0
tvservice -s -v 2
tvservice -s -v 7
Would you try to leave black the 2 parameter:
Code: screen.width =
screen.height =
Would you try to change the parameter:
Please let us know the results.
Best regards,
Francesco
Posts: 4
Threads: 1
Joined: Apr 2024
Reputation:
0
Hello Francesco,
i'm having the same issue as PeterLustig33 though with a bit different setup.
I'm using a PI3B, with the official 7 inch touchscreen, embedded in a Rasptouch case running on a updated version of Moode to last one, and using an "anotheruser" as user to connect via webterminal, build, and run peppymeter (no pi user in my install).
Following you guide on GitHub, everything works fine until step 4 (step 2 test is working ok as well).
And then, when I run
Code: sudo python3 peppymeter.py
I have the exact same messages:
Code: pygame 1.9.6
Hello from the pygame community. https://www.pygame.org/contribute.html
libpng warning: iCCP: known incorrect sRGB profile
The config file is
Code: [current]
meter = random
random.meter.interval = 20
base.folder =
meter.folder = 800x480
screen.width =
screen.height =
exit.on.touch = False
stop.display.on.touch = False
output.display = True
output.serial = False
output.i2c = False
output.pwm = False
output.http = False
use.logging = False
use.cache = True
cache.size = 20
frame.rate = 30
[sdl.env]
#framebuffer.device = /dev/fb1
framebuffer.device = /dev/fb0
#mouse.device = /dev/input/touchscreen
mouse.device = /dev/input/event0
mouse.driver = TSLIB
mouse.enabled = True
video.driver = dummy
video.display = :0
double.buffer = False
no.frame = False
[serial.interface]
device.name = /dev/serial0
baud.rate = 9600
include.time = False
update.period = 0.1
[i2c.interface]
port = 1
left.channel.address = 0x21
right.channel.address = 0x20
output.size = 10
update.period = 0.1
[pwm.interface]
frequency = 500
gpio.pin.left = 24
gpio.pin.right = 25
update.period = 0.1
[http.interface]
target.url = http://localhost:8000/vumeter
update.period = 0.033
[web.server]
http.port = 8001
[data.source]
type = pipe
polling.interval = 0.04
#pipe.name = /home/pi/myfifo
pipe.name = /var/tmp/peppyfifo
volume.constant = 80.0
volume.min = 0.0
volume.max = 100.0
volume.max.in.pipe = 100.0
step = 6
mono.algorithm = average
stereo.algorithm = new
smooth.buffer.size = 4
Based on the questions you raised:
adding more info on width / height did not change anything :
Code: screen.width =800
screen.height =480
And when i'm executing the tvservice, I have the following
Code: anotheruser@moode:/home/pi/PeppyMeter $ tvservice -l
2 attached device(s), display ID's are :
Display Number 0, type Main LCD
Display Number 2, type HDMI 0
anotheruser@moode:/home/pi/PeppyMeter $ tvservice -s -v 0
state 0x400000 [LCD], 800x480 @ 60.00Hz, progressive
anotheruser@moode:/home/pi/PeppyMeter $ tvservice -s -v 2
state 0xa [HDMI DMT (4) RGB full 4:3], 640x480 @ 60.00Hz, progressive
anotheruser@moode:/home/pi/PeppyMeter $ tvservice -s -v 7
[E] Invalid device/display ID
anotheruser@moode:/home/pi/PeppyMeter $
And changing video.display doesn't change a thing either (knowing that i'm not using HDMI, but the touchscreen).
Hope this can help us to understand what's going on, and also help PeterLustig33 with this.
Posts: 30
Threads: 4
Joined: Apr 2020
Reputation:
0
(04-05-2024, 10:46 PM)fdealexa Wrote: Hi Peter,
What is your current resolution? Please try these commands:
Code: tvservice -l
tvservice -s -v 0
tvservice -s -v 2
tvservice -s -v 7
Would you try to leave black the 2 parameter:
Code: screen.width =
screen.height =
Would you try to change the parameter:
Please let us know the results.
Best regards,
Francesco
Hello Francesco ,
Thank you for supporting me.
I have now left "screen.width =" and "screen.height =" empty.
The commands have the following output:
tvservice -l
2 attached device(s), display ID's are :
Display Number 2, type HDMI 0
Display Number 7, type HDMI 1
tvservice -s -v 0
[E] Invalid device/display ID
tvservice -s -v 2
state 0xa [HDMI DMT (51) RGB full 4:3], 1600x1200 @ 60.00Hz, progressive
tvservice -s -v 7
state 0xa [HDMI DMT (4) RGB full 4:3], 640x480 @ 60.00Hz, progressive
The command: video.display = :2 did not result in any change.
It is reassuring to see that others have similar problems @ snivelfr. I was afraid I was the stupidest of them all ;-)
Posts: 552
Threads: 5
Joined: Mar 2020
Reputation:
30
@ PeterLustig33
Hi Peter,
Please use the following paramenter:
Code: screen.width = 1600
screen.height = 1200
and let us know.
Regards,
Francesco
Posts: 552
Threads: 5
Joined: Mar 2020
Reputation:
30
@ snivelfr
HI,
today I tried to replicate your problem: rpi, original touch display, PeppyMeter (using your "config.txt")
1. installation with "pi" as default user: everything ok
2. installation with "anotheruser" as default user: everything ok
3. installation with mixed user (peppyalsa on "anotheruser" and PeppyMeter on "pi"): everything ok.
At this point the problem is probably related to the RaspTouch software (if present): I'm trying to study the "RaspTouch" solution. Please, if you have any information, do not hesitate to help me on this topic.
Kind regards and thanks,
Francesco
Posts: 30
Threads: 4
Joined: Apr 2020
Reputation:
0
Hello Francesco & snivelfr,
I found a solution yesterday evening. It has to do with an incompatibility between Raspi default settings, the display and the Peppy software. The problem is probably the monitor resolution. I cannot provide a complete explanation. But I can explain my solution.
Unfortunately I don't have much time at the moment. (Illness) I will deliver my solution as soon as possible.
Best regards,
Peter
Posts: 4
Threads: 1
Joined: Apr 2024
Reputation:
0
hello gentlemen,
Thank you very much for your feedbacks.
@ fdealexa : Rapstouch is more a product designed by audiophonics (mostly the case + RASP + Display + power button + power transfo + DAC), rather than a full OS or additional soft.
my OS is Moode, and moode only.
The additional things i've done on Moode were to add some scripts at the launch of Moode to manage the power ( as per https://github.com/audiophonics/Raspberr...management , but i don't see why it should have an impact on Display).
@ PeterLustig33 get well, and see you soon.
Posts: 552
Threads: 5
Joined: Mar 2020
Reputation:
30
(04-09-2024, 07:07 AM)PeterLustig33 Wrote: Hello Francesco & snivelfr,
I found a solution yesterday evening. It has to do with an incompatibility between Raspi default settings, the display and the Peppy software. The problem is probably the monitor resolution. I cannot provide a complete explanation. But I can explain my solution.
Unfortunately I don't have much time at the moment. (Illness) I will deliver my solution as soon as possible.
Best regards,
Peter
Hi Peter,
good luck with your illness (which I hope is minor).
Best regards,
Francesco
Posts: 552
Threads: 5
Joined: Mar 2020
Reputation:
30
(04-09-2024, 08:59 AM)snivelfr Wrote: hello gentlemen,
Thank you very much for your feedbacks.
@fdealexa : Rapstouch is more a product designed by audiophonics (mostly the case + RASP + Display + power button + power transfo + DAC), rather than a full OS or additional soft.
my OS is Moode, and moode only.
The additional things i've done on Moode were to add some scripts at the launch of Moode to manage the power ( as per https://github.com/audiophonics/Raspberr...management , but i don't see why it should have an impact on Display).
@PeterLustig33 get well, and see you soon.
HI,
have you tried with moOde from scratch, without any additions? The only thing that could disturb the display is a script that can redirect the message output (I don't think so, but...).
Best regards,
Francesco
|
