[PROBLEM] Moode stops playing

[the_bertrum]

I've had radio 1 playing (with the volume down) for a couple of hours and didn't see any dropouts. That xrun condition is exactly the thing that the station monitor is there to catch. I occasionally see it on some stations I listen to regularly, and the monitor was designed to catch the condition and restart the stream. You will get a gap while it restarts, but you don't have to intervene.

Why the xrun happens is a mystery, it happens on different stations to different people, and not at all to most people on most stations it seems. Having said that, I've not noticed one since I changed my router from the VirginMedia hub I was on before, so maybe that is something to do with it.

To enable the monitor go to the Radio Manager (cog on the radio list), Stream Monitor Service set to on and resume play set to yes. Then edit the station you have issues with and set the Monitor to yes.

[PeterE]

I have a Raspberry Pi 3 Model B+. I am outside the UK and therefore using this link: http://as-hls-ww-live.akamaized.net/pool...20000.m3u8

Activated monitor so will see what it gives.

[Tim Curtis]

I have a Raspberry Pi 3 Model B+. I am outside the UK and therefore using this link: http://as-hls-ww-live.akamaized.net/pool...20000.m3u8

Activated monitor so will see what it gives.

You should have mentioned that in your OP or when you were specifically asked if you were trying to access the stream from outside the UK.

Everyone including myself was going under the assumption that you were having the issue on your home LAN and so now we end up with a giant waste of time.

[PeterE]

Excuse me for not being clear enough and answering quickly enough. I live a life off the internet and am not available to respond directly to the thread. I will now leave the forum if this is the kind of treatment you get.

[Tim Curtis]

The time that myself and others spend troubleshooting issues is not something to be taken for granted.

Thread closed.