Thank you for your donation!


Cloudsmith graciously provides open-source package management and distribution for our project.


Idea: Raspberry Pi Touch Display 2 release
#31
Yes that was the documentation, I was referring to.

The output for "kmsprint" I got is:

Connector 0 (35) DSI-2 (connected)
Encoder 0 (34) NONE
Crtc 0 (33) 720x1280@60.04 83.330 720/239/33/50/? 1280/20/2/30/? 60 (60.04)
Plane 0 (31) fb-id: 38 (crtcs: 0) 0,0 720x1280 -> 0,0 720x1280 (XR24 XB24 AR24 AB24 RG24 BG24 RG16)
FB 38 720x1280 XR24
Reply
#32
(12-02-2024, 09:18 PM)zandman Wrote: Yes that was the documentation,  I was referring to.

The output for "kmsprint" I got is:

Connector 0 (35) DSI-2 (connected)                                                                                                                                            
 Encoder 0 (34) NONE                                                                                                                                                          
   Crtc 0 (33) 720x1280@60.04 83.330 720/239/33/50/? 1280/20/2/30/? 60 (60.04)                                                                                                
     Plane 0 (31) fb-id: 38 (crtcs: 0) 0,0 720x1280 -> 0,0 720x1280 (XR24 XB24 AR24 AB24 RG24 BG24 RG16)                                                                      
       FB 38 720x1280 XR24

Ok I'll add an option for DSI port.
Enjoy the Music!
moodeaudio.org | Mastodon Feed | GitHub
Reply
#33
I can confirm, switching to DSI port labelled "0" on the Pi5 does resolve the problem on 9.1.5.
Reply
#34
(11-24-2024, 02:22 PM)Artemis Wrote: Hello, I have similar issue with the new Raspberry Pi Touch Display 2.

I mean, it works fine after some modifications, but I am unable to rotate the screen to 90 degrees right. The modifications I have made are:

   replaced vc4-kms-dsi-ili9881-7inch.dtbo with the one from here:

https://community.volumio.com/uploads/sh...w4Bik8.zip

   added /boot/firmware/config the following line:

# Match your rotation counter clockwise 0, 90, 180, 270 degree
dtoverlay=vc4-kms-dsi-ili9881-7inch,rotation=90.

When my Raspberry Pi (3 B+) boots the screen is properly displayed (horizontal view), but when Moode UI is loaded is back to vertical view.

I tried this via SSH:

$ export DISPLAY=:0
$ xrandr --output DSI-1 --rotate right

and it rotates the screen, but then it is not scaled properly.

Any ideas how to fix this?

regards

Maybe this is interesting?

https://community.volumio.com/t/guide-of...2/69791/26

Happy listening!
Reply


Forum Jump: